Went to a small 1/8th mile track and ran a few good times, best was 9.66 @ 74mph. Pretty impressive for all motor here is the slip.
Reaction .... 0.219
60' ............ 2.182
330' ......... 6.263
MPH ........... 74.53
1/8th ............ 9.666
Let me know what ya think, need to get back to a 1/4mile track now. Later
15 inch steelies off another kids cavalier .. not great traction but it works for now
Not bad, but would hope for better with your mods. I have had 9.4's
FU Tuning
Yeah...even I had 9.7's (I,E,MM) which isn't far off. But not bad at all...nice trap too.
nice job man!!! I ran a 10.118 at 69.38 MPH with an all motor 2.2L with stock 15" steelies.
this is my slip
R/T... .520
60'... 2.307
330... 6.539
1/8... 10.118
MPH... 69.38
John Higgins wrote:Not bad, but would hope for better with your mods. I have had 9.4's
Yea, i mean im sure track conditions and what not played a part but here was what other cars were running
STI (stock) 9.2 best
SRT4 (Stage 2) 8.9 best
2.2 Cavi (55 shot) 10.2 best
Those other times are almost dead nutz on.
StreetCavi98 wrote:Went to a small 1/8th mile track and ran a few good times, best was 9.66 @ 74mph. Pretty impressive for all motor here is the slip.
Reaction .... 0.219
60' ............ 2.182
330' ......... 6.263
MPH ........... 74.53
1/8th ............ 9.666
Let me know what ya think, need to get back to a 1/4mile track now. Later
Not bad.... That's a very respectable time for a J body... but with a .21 RT... I think you need to wait a bit longer
I know it's JUST a Cavalier, and I'm sorry if I hurt your ego.
According to my calculations, he should be running around a 9.3 with traction. That's based off his mph being 74.5. Mid 14 in the 1/4.
2000 Turbo Z
a srt-4 with stage 2 runs 8.9 1/8 miles?
god damn my 1/8 mile rocks!
(8.9 @ 78 mph)
___________________________________________
1989 3.1/3400 hybrid Nitrous fed Z24.
14.13@96.69 mph full interior, N/A
(still haven't sprayed at the track)
Burnout wrote:According to my calculations, he should be running around a 9.3 with traction. That's based off his mph being 74.5. Mid 14 in the 1/4.
What calculation is that?
2.18 60' isn't that bad.
Lash wrote:Burnout wrote:According to my calculations, he should be running around a 9.3 with traction. That's based off his mph being 74.5. Mid 14 in the 1/4.
What calculation is that?
2.18 60' isn't that bad.
I second that. He would have to cut a 2.0 or better 60' time to hit a 9.3. BTW, nice times though, I think the best 1/8th I ever got all motor was a 9.7
<img src=http://ourworld.cs.com/jwithspray/Nitrosig13303.JPG>
Lash wrote:Burnout wrote:According to my calculations, he should be running around a 9.3 with traction. That's based off his mph being 74.5. Mid 14 in the 1/4.
What calculation is that?
2.18 60' isn't that bad.
Correct 2.1 60ft is a traction 60ft. I have run 14.83 off 2.1 60fts.
FU Tuning
not a chance he would hit mid 14's in the quarter
^
I ran a 15.1 with a 9.77@72mph 1/8 mile time.
i ran a 9.83@72.something in my 2.4 sf, but never broke under 15.51 in the quarter
Slobra(1quickj) wrote:i ran a 9.83@72.something in my 2.4 sf, but never broke under 15.51 in the quarter
Correct it all comes down to where your set up is strongest at. Some cars have a better top end, some have better low end. I ran a 9.4 and pulled a 14.83. I have also pulled a 9.6 and a 14.8 as well. Many factors play into it.
FU Tuning
i did 9.99 and hit 15.3 in the 1/4
