ECOTec 13s ALL MOTOR, L61-F23 - Racing Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
ECOTec 13s ALL MOTOR, L61-F23
Monday, June 18, 2007 3:02 PM
Hey Hey Finally the Credit Cards are paying off, well not really, After a few dyno pulls and some tuning, it finally happened, not just one time, 6 TIMES! in a 2 day race weekend, I even dialed the car into the 13's. A few of the slips are posted in my sig, if you want to see my slips i will scan them for my records and will send you a bmp through email if you want, my email is bwenzeljr@yahoo.com. Im not done there, the weather was HOT mid 90's both days, well see what happens when we get a 50deg fall night (13.60's 100mph+ ALL MOTOR) See ya in Union Grove, WI

-Ben



Overall Best times
60' - 1.885 (6/10/07)-(Drag Radials 205-50-15)
330' - 5.681 (6/17/07)
1/8 - 8.833 (6/17/07)
M.P.H.- 79.49 (6/17/07)
1000' - 11.544 (6/17/07)
1/4 - 13.907 (6/17/07)
M.P.H.- 98.50 (6/17/07)

** ALL MOTOR **
* 160.9whp @ 6394rpm *
Website: www.benwenzeljr.com

Re: ECOTec 13s ALL MOTOR, L61-F23
Monday, June 18, 2007 4:13 PM
Nice job!!



FU Tuning



Re: ECOTec 13s ALL MOTOR, L61-F23
Monday, June 18, 2007 4:52 PM
2450 with you in it? NICE.

Mine is 2750 with me in it and I'm 220.



Re: ECOTec 13s ALL MOTOR, L61-F23
Monday, June 18, 2007 9:53 PM
Good to hear....but wheres the video? dyno or track will do. I wanna see up graph.






Re: ECOTec 13s ALL MOTOR, L61-F23
Tuesday, June 19, 2007 1:55 AM
nice time ben.....really nice times



Re: ECOTec 13s ALL MOTOR, L61-F23
Tuesday, June 19, 2007 11:08 AM
congrats. nice time. i like the 60ft too. thats where i hurt the most.(2.4 average)

btw, what made u go with such a low comp ratio piston and a stage 3 cam?? more aggressive cams like a higher comp.. and if u were building for boost. there would be no need in getting that radical of a n/a cam.


http://www.myspace.com/15102113

12.5@116 2.0 60ft
Re: ECOTec 13s ALL MOTOR, L61-F23
Tuesday, June 19, 2007 11:09 AM
btw how did u get down to 2450 with u in it?? how much do u weigh?


http://www.myspace.com/15102113

12.5@116 2.0 60ft
Re: ECOTec 13s ALL MOTOR, L61-F23
Tuesday, June 19, 2007 1:19 PM
He was building the motor for boost but decided to take down the NA list first. He got the Stage 3 cams so he could get as much out of the car as possible before he boosts it. When he boosts it he'll probably change the cams too.

How do I know? I sponsor the f00 and he tells me everything. LOL. Like how he enjoys screwing skwirls.....oops. Wasn't supposed to tell you that.




Edited 2 time(s). Last edited Tuesday, June 19, 2007 1:20 PM


I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: ECOTec 13s ALL MOTOR, L61-F23
Tuesday, June 19, 2007 1:36 PM
Very nice, and not begging for attention. I like this guy .





Re: ECOTec 13s ALL MOTOR, L61-F23
Tuesday, June 19, 2007 1:40 PM
I know alittle too I was there
Re: ECOTec 13s ALL MOTOR, L61-F23
Tuesday, June 19, 2007 1:48 PM
Damn sweet..i cant wait to get my eco there..but what has he done cause he has barely anything done to get that low of times? phil

Re: ECOTec 13s ALL MOTOR, L61-F23
Tuesday, June 19, 2007 2:00 PM
when we were putting the motor together in the winter months. we were hoping just to keep times into the 14 sec zone. break the motor in and put the 12 to 1 together. things sure change in a few times down the track.
Re: ECOTec 13s ALL MOTOR, L61-F23
Tuesday, June 19, 2007 2:02 PM
Philly D wrote:Damn sweet..i cant wait to get my eco there..but what has he done cause he has barely anything done to get that low of times? phil


His profile doesn't begin to tell you everything. You gotta ask the man himself if you want the facts.

Joe: That's why I like Ben. He's done something amazing and all he does is make one post and disappear again. So modest.....until this weekend. LOL.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: ECOTec 13s ALL MOTOR, L61-F23
Tuesday, June 19, 2007 2:15 PM
wish i was going
Re: ECOTec 13s ALL MOTOR, L61-F23
Wednesday, June 20, 2007 4:24 PM
wow!! very nice times. I see you're making 160.9whp @ 6394 rpms. pretty close to mines 161whp at 6200 rpms. I wonder what I could run. damm hawaii with no track.



Re: ECOTec 13s ALL MOTOR, L61-F23
Wednesday, June 20, 2007 5:37 PM
Congrats!


- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.

Re: ECOTec 13s ALL MOTOR, L61-F23
Friday, June 22, 2007 10:41 AM
Hello everyone, thanks for all your support! Dave Wenzel and I have done alot of work on the car so far. Things just keep falling into place, got a call today from this guy, hes using my car to promote his new site, www.allecotec.com The site is not quite done but keep checking it out for progress. Its an all ecotec proformance parts website, witch is SWEET for us ecotec guys Ill keep you posted on everthing

-Ben



Overall Best times
60' - 1.885 (6/10/07)-(Drag Radials 205-50-15)
330' - 5.681 (6/17/07)
1/8 - 8.833 (6/17/07)
M.P.H.- 79.49 (6/17/07)
1000' - 11.544 (6/17/07)
1/4 - 13.907 (6/17/07)
M.P.H.- 98.50 (6/17/07)

** ALL MOTOR **
* 160.9whp @ 6394rpm *
Website: www.benwenzeljr.com
Re: ECOTec 13s ALL MOTOR, L61-F23
Sunday, June 24, 2007 10:53 AM
Congrats Ben!!!!

I can smell lower times real soon.....

Good luck with everything.







Re: ECOTec 13s ALL MOTOR, L61-F23
Sunday, June 24, 2007 4:32 PM
lower times are already here....but ill let ben tell you guys how fast it was...



Re: ECOTec 13s ALL MOTOR, L61-F23
Sunday, June 24, 2007 6:59 PM
USJDM.....GOT YA B!TCH! wrote:lower times are already here....but ill let ben tell you guys how fast it was...


Believe you me, I know the lower times I was on the phone with him when it happened







Re: ECOTec 13s ALL MOTOR, L61-F23
Sunday, June 24, 2007 7:11 PM
Good times were had!




Re: ECOTec 13s ALL MOTOR, L61-F23
Monday, June 25, 2007 4:07 PM
We made it home safe . I had a great time meeting and talking with all who showed. Hope to see all next month.
Re: ECOTec 13s ALL MOTOR, L61-F23
Monday, June 25, 2007 4:22 PM
What a record setting and amazing weekend I bet your all wondering what i did to go that fast? Well Dave and I talked it over and said we should lay out or cards out first and see what happens next. I raized my shift points 600 rpms and let er go, wow its strange to shiftt into 3rd about 500' down the track and sit back for the ride there after. I launched at 3630 and shifted twice at 7500 and went through the traps at 7802. Second run launched 3525 and shifted at twice at 7600 and went through the traps at 7792. Had a great time after a 14 hour and 800 miles round trip, well worth the trip.

Had a few grudge races ya win some you lose some,

W - Jake - 93 Orange Grand Am RT .093 13.705 @ 96.86
L - Ben - 04 Red Cavalier RT .126 13.779 @ 100.68

Margin of Victory .1076 (about 20' - my front bumper to his rear bumper)
Time of Day 12:31pm

W - Ben - 04 Red Cavalier RT .044 14.159 @ 96.88
L - PJ - 02 Silver Cavalier RT .207 14.534 @ 93.36

Margin of Victory .5388 (not sure on distance, couldnt see in side mirror)
Time of Day 4:39 pm

See every one at the 07 BASH with maybe a few more suprises
-Ben




Overall Best times
60' - 1.857* (6/24/07)-(Drag Radials 205-50-15)
330' - 5.552* (6/24/07)
1/8 - 8.702* (6/24/07)
M.P.H.- 79.49 (6/17/07)
1000' - 11.388* (6/24/07)
1/4 - 13.671* (6/24/07)
M.P.H.- 100.79* (6/17/07)

Great Lakes Dragaway (6/24/07 Import Wars #3)
* - First run on the day set NEW all motor record
next run backed up record by 1% (slip in profile)

** ALL MOTOR **
* 160.9whp @ 6394rpm *
Website: www.benwenzeljr.com
Re: ECOTec 13s ALL MOTOR, L61-F23
Monday, June 25, 2007 6:04 PM
Dave Wenzel wrote:We made it home safe . I had a great time meeting and talking with all who showed. Hope to see all next month.


It was good to meet you guys. Too bad i sent you the wrong way on the freeway Glad you guys made it and set some more records

Congrats Ben



Re: ECOTec 13s ALL MOTOR, L61-F23
Monday, June 25, 2007 7:48 PM
Where do I send my money for all the drooling and oogling I did over the car?

It gave me a few new ideas for our POS...... I mean "Drag Car"....... lol

Congrats Ben, was good to hang out with you guys again. Look forward to seeing you in Ohio. Was great to meet you as well Dave.

PS. NEVER listen to Tom when you need directions!!!




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search