no eco love
z28guy(KGM BEOTCH)
BOOSTED / JMdecals.com! wrote:1. Taetsch Z-24 13.7 @102.45 MPH
2. BOOSTED 13.9 @ 103.5 MPH @ 6PSI
3. AZSpitFire97+01 (Todd) 14.1 @ 96
4. mitdr774 14.2@99.7 on 7.5 PSI
5. Luke Heier 14.4 @97
6. Viral (kris) 14.47 @ 94.55
7. Wade Jarvis 14.5@ ?? 2.8" pully
8. icemike89(not turbo) 14.8 @ 92 on 5 PSI
9. Joe Schulte 14.75@93.32 on 5psi
10. [ion] C2 14.8 @ 91 on 3-4 PSI
#2 beeeatches!
And you don't feel like telling us anything about your setup??
Matthew Jollymore wrote:Sparky15_00 (Corsica Dude) wrote:i'm not posting. I'm embarrassed.
x2
I am working on getting into the 14's...doing a few things to the car monday...I'm going to the test and tune the next tuesday I have off, should have a set of slicks by then too...hoping for a mid 14.
Slicks are a more than a litle overkill. Until you are consistently in the 13's you don't have any bussiness running drag radials or drag slicks IMO.
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
Im not running at the track until the bash time, but I should be pretty high up on that list by then
BOOSTED / JMdecals.com! wrote:1. Taetsch Z-24 13.7 @102.45 MPH
2. BOOSTED 13.9 @ 103.5 MPH @ 6PSI
3. AZSpitFire97+01 (Todd) 14.1 @ 96
4. mitdr774 14.2@99.7 on 7.5 PSI
5. Luke Heier 14.4 @97
6. Viral (kris) 14.47 @ 94.55
7. Wade Jarvis 14.5@ ??
8. icemike89(not turbo) 14.8 @ 92 on 5 PSI
9. [ion] C2 14.8 @ 91 on 3-4 PSI
10. Joe Schulte 14.75@93.32 on 5psi
#2 beeeatches!
damn you for bumping me!!!
If I'm weird and everyone else is weird, does that make me normal?
-me
Versus Motorsports really @!#$ sucks
and so does DHL...but more
1. Taetsch Z-24 13.7 @102.45 MPH
2. BOOSTED 13.9 @ 103.5 MPH @ 6PSI
3. AZSpitFire97+01 (Todd) 14.1 @ 96
4. mitdr774 14.2@99.7 on 7.5 PSI
5. LAFNGAS 14.38 @ 97MPH
6. Luke Heier 14.4 @97
7. Viral (kris) 14.47 @ 94.55
8. Wade Jarvis 14.5@ ??
9. icemike89(not turbo) 14.8 @ 92 on 5 PSI
10. [ion] C2 14.8 @ 91 on 3-4 PSI
How many of you guys ran without the use of giggle gas?? My runs wernt even with alcohol. Didint need it with the S/C build.
Neither was I, that is why I asked. I would like to know if those guys were able to break into the 13's without giggle gas.
If I had the money I would attempt another S/C build, but the S/C kit would add about $1500 to my rebuild assuming I didnt dick with it. I know that if I had a S/C in good condition I could have done better.
no nitrous...no alcy
though i am running with the prototype supercharger with the oversized crank pully pushing 13psi...and the normal cai, header, exhaust
im sure with better tires i would have been in 13's
If I'm weird and everyone else is weird, does that make me normal?
-me
Versus Motorsports really @!#$ sucks
and so does DHL...but more
Wow 13 PSI.
I was only pushing 7.5 PSI. Ported head and HO cams FTW.
14.38 @ 94 was my best with poor traction , never got a good run on dr's weather got to hot
mitdr774 wrote:How many of you guys ran without the use of giggle gas?? My runs wernt even with alcohol. Didint need it with the S/C build.
my 14.2-.13.9 runs were with out N20, all with a 130K mile stock car, the 13.7 run was with a 30 shot dry, only spraying 1-2nd gear... my switch owned me.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
I ran on 93 octange, no alky, no nitrous
Now if i ran the car i honestly think i would break 13.7-13.5 with a tune with my new mods since the 13.9 run
I don't need any giggle gas, it's only a AUTOMATIC sunfire.
Edited 1 time(s). Last edited Monday, July 07, 2008 6:48 PM
I would live to redo my S/C build and actualy play around with the program this time around. I didint have HPT when I ran the engine. Have it now though and would like to play around again.
mitdr774 wrote:I would live to redo my S/C build and actualy play around with the program this time around. I didint have HPT when I ran the engine. Have it now though and would like to play around again.
I think it would be a whole nother ball game this time around if you were to do it again. Where did you get a 2.4 pulley fronm again? I think I might have asked you that once before.
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
Why is it i'm still not close to your guys times? lol.
18" rims won't help
and if you leave the audio stuff in it doesn't help either
If I'm weird and everyone else is weird, does that make me normal?
-me
Versus Motorsports really @!#$ sucks
and so does DHL...but more
...its hot down there.... get water injection...
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
^^^ exactly!
hot temps outside? alcohol/methanol/water injection will make that SC nice n cool.
Wade Jarvis wrote:mitdr774 wrote:I would live to redo my S/C build and actualy play around with the program this time around. I didint have HPT when I ran the engine. Have it now though and would like to play around again.
I think it would be a whole nother ball game this time around if you were to do it again. Where did you get a 2.4 pulley fronm again? I think I might have asked you that once before.
Pulley Boys, it is actualy offered for the M90. If I did it again the only mechanical differance would be the head work and bigger cams. I would go with 10:1 CR again. maybe even get the S/C worked over a little.
OS crank pulley FTW!
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
as long as you prep correctly...heat won't affect too much...all i did was ice the supercharger between runs and gave it alot of time to cool off
no alcy and im in arizona
not saying alcy doesn't help though
Taetsch Z-24 wrote:OS crank pulley FTW!
Chris
qft...reason im hitting 13psi
If I'm weird and everyone else is weird, does that make me normal?
-me
Versus Motorsports really @!#$ sucks
and so does DHL...but more
!!
heat does a lot..... KR, denser air charge, more timing, leaner AFR (safer)...
on a 95* day, with water injection, my intake air temps were 75*....
water injection really makes this set up work.
but what do I know about racing it.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
Ill be spraying for sure at the bash, I need to hurry up and get alchy but dont know if Ill be able to before then.
Clyde you ran a 2.4 pulley with no alchy? I can definitely feel when my sc gets hot, Ill see 7-8psi when its like 60 degrees or below but in this heat I barely see 5psi.
i know heat affects it...trust me hence why i said not much. the sc heat soaks like a mofo. thats why i sat an ice bag on mine between runs untill the sc was cold to the touch....then i ran it
If I'm weird and everyone else is weird, does that make me normal?
-me
Versus Motorsports really @!#$ sucks
and so does DHL...but more