Have a push - Racing Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Have a push
Wednesday, August 06, 2008 7:23 PM
Any thoughts on how to get rid of a push. I have a 1992 cavalier I run on a 1/2 paved track. Im new to front wheel car racing. So Im sure the set up and chassis adjustments are all different then on a full size race car. Thanks in advance.

Re: Have a push
Wednesday, August 06, 2008 8:48 PM
Hey, I race a 94 on a 1/4 mile paved... We have found tire pressures make a big difference. RF=36 RR=30 LF=22 LR=24... Also camber is what probably make your biggest difference... Thats my experience... I am on a shorter track than you though...
Re: Have a push
Wednesday, August 06, 2008 9:50 PM
Thanks for the response. I have played with air pressure a bit. It does seems to help a little. My camber seems to be close. I am getting good even tire wear across the face of the right front.
Re: Have a push
Friday, August 08, 2008 10:07 AM
How new is your rf strut? I replace mine and it helped alot. How many miles are on it? It might need a new spring also. Are you toed out at least an 1/8 inch?
Re: Have a push
Saturday, August 30, 2008 7:33 PM
If your track rules allow, try a KYB strut
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search