Rear Camber??? - Racing Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Rear Camber???
Sunday, January 25, 2009 4:38 AM
I was wanting to put about 1 degree of rear camber in each wheel... I have camboer bolts in the front. But how would I go about doing the rear??? Its a 94 2.2 circle track cavalier...

Re: Rear Camber???
Sunday, January 25, 2009 4:56 AM
I found these, which are supposred to work http://www.horsepowerfreaks.com/partdetails/Ingalls/Suspension/Camber_Kits/Rear/3251. I wonder if its a one piece or not.. Anything else guys?
Re: Rear Camber???
Sunday, January 25, 2009 4:59 AM
Ingalls Engeneering adjustable shims, they fit between the axle beam and the bearing/hub assembly. Read the directions on how to do the adjustments. You can order them through Summit Racing or possibly through a local shop.





Re: Rear Camber???
Sunday, January 25, 2009 6:40 AM
Most shops have the shims... I'm siting on a stack of them right now for mine.


Chris




'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search