roller rockers - Racing Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
roller rockers
Thursday, July 22, 2010 5:25 AM
can i take the roller rockers off of a 98 2.2 and put them on my 96 2.2?

Re: roller rockers
Thursday, July 22, 2010 6:08 AM
the 98 didn't come factory with roller rockers.if you found one that has them, then someone installed them. you would need different studs for the rocker arm mount.



JBO Stickers! Get yours today!
Re: roller rockers
Thursday, July 22, 2010 12:28 PM
Rich Grayo Jr. wrote:

the 98 didn't come factory with roller rockers.if you found one that has them, then someone installed them. you would need different studs for the rocker arm mount.
Yes, it did. 98+ rockers have a roller fulcrum (more important than roller tip).

However, they are not adjustable, and the mounting thread is different on 97- heads, so no, they won't swap.




fortune cookie say: better a delay than a disaster
Re: roller rockers
Wednesday, August 25, 2010 9:11 PM
You can use a set of studs for a 4.3 V6 and put a set of full roller narrow body rockers on it. I have found that a 1.6 to 1 set off of a ls1 work well. You just need to order the correct poly locks. P.S. you will have to clearance the valve cover.
Re: roller rockers
Thursday, August 26, 2010 2:17 AM
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search