Wrecked my baby... R.I.P. - Jacked / Wrecked / Sold Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Wrecked my baby... R.I.P.
Friday, October 26, 2012 8:37 PM
Well... A series of unfortunate events landed the front end of my '99 Cavalier Z-24 under the rear bumper of a 1500 chevy truck... Not much else to say i guess...

I never did take many pictures, no camera.. not that into it.. but heres a few of my favs i have..

Camouflaged


One of the first pics I ever saw of her before I bought..


The lights!


And the devastation..


She will be missed dearly, but has been replaced with a red 04 LSS Coupe. Has pretty much the same options as my z did, except its not a manual trans

I will be doing a small part out on the z, so if your in need of any parts for/from a 99 2.4 manual trans.. let me know, make an offer... I reserve teh right to say no to any particular part if I don't feel like pullin it off lol


Have a nice day.

Re: Wrecked my baby... R.I.P.
Friday, October 26, 2012 8:58 PM
Were those LED strips/sticks you had behind the grill and hood?


"United by Individuality"
"If life is a joke, why aren't we laughing?"
"Normality depends on one's perception of reality."
http://www.cardomain.com/ride/3820803
Re: Wrecked my baby... R.I.P.
Friday, October 26, 2012 10:03 PM
macktruck84 wrote:

Were those LED strips/sticks you had behind the grill and hood?


Yeah, three led strips total.. one was lighting up the hood gap and then two were down on that rubber damper or whatever it is, pointed forward. looked pretty sweet even though I couldnt drive with them on...


Have a nice day.
Re: Wrecked my baby... R.I.P.
Friday, October 26, 2012 10:15 PM
Jordan wrote:

macktruck84 wrote:

Were those LED strips/sticks you had behind the grill and hood?


Yeah, three led strips total.. one was lighting up the hood gap and then two were down on that rubber damper or whatever it is, pointed forward. looked pretty sweet even though I couldnt drive with them on...


I hear ya. It's the same here. But that is giving me possible ideas for in the future.

Btw, it's a shame what happened to your Z.


"United by Individuality"
"If life is a joke, why aren't we laughing?"
"Normality depends on one's perception of reality."
http://www.cardomain.com/ride/3820803
Re: Wrecked my baby... R.I.P.
Sunday, November 25, 2012 3:21 PM
where are you located at?


95 Z26, OBD2 swap, 3400, 5 speed
96 S10, 4.3L, 5 speed, posi, 2wd

97 Z24, sunroof, 5 speed <--- Saved & Sold
Re: Wrecked my baby... R.I.P.
Saturday, December 08, 2012 6:58 AM
Any go fast parts that you might be willing to part with? Or perhaps some wheels and tires? Thanks for your time

Justin
Re: Wrecked my baby... R.I.P.
Monday, December 10, 2012 6:05 PM
Willing to sell the rims and tires?
Re: Wrecked my baby... R.I.P.
Tuesday, December 11, 2012 12:40 AM
I want that Beretta gtu in that pic of your car lol
Re: Wrecked my baby... R.I.P.
Sunday, December 16, 2012 2:28 PM
2nd on that gtu. man i miss my 90 gtz
Re: Wrecked my baby... R.I.P.
Tuesday, December 18, 2012 6:56 PM
Let me know if you will let go of the rims and tires?
Re: Wrecked my baby... R.I.P.
Saturday, January 12, 2013 10:08 AM
Lol sorry the GTU belongs to Kurt (KFLO) on this site and beretta.net. i bought the car from him and he kept the enkeis when i got the car. I only have the z rims which will be going on my beretta. My brakes are for sale, about the only thing worth anything now. In classifieds.


Have a nice day.

Re: Wrecked my baby... R.I.P.
Monday, January 14, 2013 5:46 AM
i need the shift boot retainer thing is its in one piece.



Re: Wrecked my baby... R.I.P.
Monday, January 14, 2013 8:14 AM
No clue what that is? Or does? The shift boot is still on the plastic piece if that means anything


Have a nice day.
Re: Wrecked my baby... R.I.P.
Monday, January 14, 2013 9:40 AM
bnet is all thats left since bstuff went down
Re: Wrecked my baby... R.I.P.
Monday, January 14, 2013 10:44 AM
Yeah i know lol. I met kurt/found my cav on bstuff, i was on there till the end but i cant stand b.net.. my beretta is sitting with a bad trans, goes forward but no reverse.


Have a nice day.
Re: Wrecked my baby... R.I.P.
Monday, January 14, 2013 2:43 PM
yha i was talking about the shift boot and the little ring thing its stuck to to hold it in the console. how much would you be looking to get for it?



Re: Wrecked my baby... R.I.P.
Monday, January 14, 2013 3:48 PM
Idk. Id prolly send the whole plastic piece with the boot... 10+ship?


Have a nice day.
Re: Wrecked my baby... R.I.P.
Tuesday, January 15, 2013 2:11 PM
as longas all the tabs are on the plastic piece deal



Re: Wrecked my baby... R.I.P.
Tuesday, January 15, 2013 3:42 PM
Well, just thinking is the part from my 99 cav gonna fit your 03 fire?


Have a nice day.
Re: Wrecked my baby... R.I.P.
Tuesday, January 15, 2013 4:16 PM
im not sure why but i thought it was a 2000, sorry :/
Are your B-pillar covers still good? since i was to ignorant to read your post il try to find somthing elts i like



Re: Wrecked my baby... R.I.P.
Tuesday, January 15, 2013 4:19 PM
They are very nice actually, kurt installed new covers from gm a while before i bought it.


Have a nice day.

Re: Wrecked my baby... R.I.P.
Sunday, January 20, 2013 9:02 AM
How much for the whole car?




My car was made with wrenches, Not chopsticks.
Re: Wrecked my baby... R.I.P.
Sunday, January 20, 2013 10:36 AM
Flaked Z-Fire wrote:

How much for the whole car?


That depends on how many parts I pull off of it. To be honest aside from the parts i have on it there isnt much worth anything on the car but the motor and trans


Have a nice day.
Re: Wrecked my baby... R.I.P.
Thursday, January 24, 2013 11:05 AM
Looking for a a lil project dirt track car that i can piece together dont need to be streetable.

Just a thought i had.





My car was made with wrenches, Not chopsticks.
Re: Wrecked my baby... R.I.P.
Thursday, January 24, 2013 4:21 PM
Well that would be fair i suppose, the same thought crossed my mind but i dont have the time to do deal with a race car. The biggest issue for that would be replacing the radiator support and related pieces, also re wiring a fair portion of the engine bay. (Throttle body, fuse block areas)


Have a nice day.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search