This sounds sweet! I just read all of this and I want one.
My one thought, from a programing newb:
I know a while ago Black Cat Customs was looking into doing a tac that worked to 8 or 9,000 RPM but there was too much cost in getting the software to properly calibrate the ECU. Will this be able to properly run a tac that high? Or is that another system, the BCM or something like that, which runs it? Assuming Black Cat makes one like that goes up that high. I just really don't want to mount an aftermarket tac on my dash.
Sorry if thats confusing, I am just looking for options for when I ever get around to doing my N/A build and I anticipate needing to go over the stock tac.
Shawn M.
PSN ID: Phatchance249
I know you said you were busy, but updates?
PSN ID: Phatchance249
Hey Shifted... I found this while surfing. What do you think...
http://www.14point7.com/RICE/RICE.htm
The guy seems to be working on a similar project as you.
Darryn
2004 Cavalier coupe, 5 speed, White
GO
Hahn Stage 2, Eagle rods, Wiseco 8.9, SS Valves, Dual valve springs, valve job, Ti seats and retainers
spec stage 3, Fidanza 7.5lb flywheel, Short Shifter
Slotted and dimpled rotors, EBC green stuff
SHOW
VIS EVO CF hood, KOBE KAM 5 17", Nexxen N3000, Ebay Black tails and filler, 5% tint
Gold line springs, Tokiko D-spec struts
ELECTRONICS
Kenwood in-dash DVD and Navigation, single Kicker CompVR
http://www.cardomain.com/ride/2974835
^^Just was going to post that. It's not an ECU replacement or standalone. Just a piggyback.
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
Will this thing have some form of tune already on it, or will it be completely blank, requiring pre-programing before installing?
Last questions, will you be able to replace the stock O2 sensor with a wideband and have the ecu run closed loop operations strictly through the wideband? Or will it have support for wideband, only in addition to the stock O2 sensors? Can you hook up an AFR gauge directly to the ecu?
Yes, I'm hoping to have it be able to run from just a wideband sensor, but it will at least support the stock O2. You won't be able to hook an AFR gauge directly to the ECU, what will happen with the wideband is that the sensor will go into the wideband controller box, and the output of the controller box will go into the ECU. The gauge would tie into the controller box, not the ECU. This is because there is a lot of circuitry involved in controlling the many different kinds of wideband sensors on the market, and I'd rather get the input from the control box (which you get anyway with the wideband kit).
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
SO, AH, when are you coming "home" for a visit Ron?
Nice work man.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
you stated in the beginning that the ecu wont support 4spds... when your ecu were to come out.. and i were to swap to a 5spd.. would i have any immediate problems? i know i would have to use hpt now to delete some things to do the swap.. but would ur ecu think its a 5 spd anyway?
thanks..
ps.. i cant believe your doing this for j's... un-freakin-believable.. thankyouthankyouthankyou
"Z24 Dustbunny"
Shifted,
I have not yet really had a chance to read through this entire thread, but I'd like to talk to you in a more 2-way fashion. I have some questions for you about this tuning system that you may/may not make.
I am currently working on my 94 Cobra, running a 347ci stroker and tuning it with a MS2 V3.0.
If perhaps you might wanna talk to me about the subject, maybe see if I would fit your requirements for a guinea pig.. so to speak.
anyway, PM me
1994 Ford Mustang Cobra
1997 Sunfire GT
Oh yea, forgot to add, this would ne going on my 97 sunflower... with the GM s/c package and 2.3 cam swap
1994 Ford Mustang Cobra
1997 Sunfire GT
AdderMk2 wrote:Oh yea, forgot to add, this would ne going on my 97 sunflower... with the GM s/c package and 2.3 cam swap
Keep watching the forums for when I'm looking for beta testers, it'll be a little while yet, get a hold of me then....
Ok, here's what I just picked up:
(4) Atmel AT91SAM7A3 Microcontrollers
(4) Schmartboards
(1) SAM-ICE JTAG Programmer
Keil RealView MDK
I think I'll start writing the code within the next week or so, and hopefully I'll have found somebody to prototype and layout the board for me within 2 weeks.
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
^^Great news Shifted! Can't wait!
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
wow just read though the whole thread. if you can get this thing to run a 4 speed and be a reasonable price i'm in
Just wanted to keep this on the front page in case of updates... Bump!
Shifted, any chance in getting something made up similar to the
DashHawk for real time monitoring and loading tunes in real time?
Desert Tuners
“When you come across a big kettle of crazy, it’s best not to stir it.”
^ Sure, wouldn't be done at the time of release, but would be one of those add-on things that could be developed later. In fact, that thing shouldn't have a problem working with this ECU since it talks both CAN and J1850.
BTW, 58x crank position sensor, no problem
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
awesome. the Eco guys are sure going to love you.
Desert Tuners
“When you come across a big kettle of crazy, it’s best not to stir it.”
i know im counting on this..lol..