Android Torque App - Page 2 - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Android Torque App
Thursday, August 25, 2011 3:09 PM
still waiting on my new adaptor to show up




Re: Android Torque App
Friday, August 26, 2011 1:14 PM
Here is a dumb question. Anyone know if it's ok to clear a cel with the car running? I did last night just curious if it's bad or not....



Re: Android Torque App
Friday, August 26, 2011 1:16 PM
dont see why it would matter. i dont think it will actually clear until the next ignition cycle anyways.



Re: Android Torque App
Friday, August 26, 2011 1:17 PM
and my new adaptor shipped out today. hopefully i have no problems with this one.



Re: Android Torque App
Friday, August 26, 2011 1:39 PM
Ive always done it without any problems while running.

Anyone know if the basic version reads throttle position? Ive had a tps code and replaced the tps sensor, and it isnt reading throttle position. I was wondering if its because theres an issue or just the basic version doesnt use this feature.



Re: Android Torque App
Friday, August 26, 2011 2:01 PM
icemike89 wrote:

Ive always done it without any problems while running.

Anyone know if the basic version reads throttle position? Ive had a tps code and replaced the tps sensor, and it isnt reading throttle position. I was wondering if its because theres an issue or just the basic version doesnt use this feature.


Yeah it does if I recall. I have the pro version now lol.



Re: Android Torque App
Monday, August 29, 2011 3:17 PM
new adaptor is at home in my mail box...gonna play with it tonight.



Re: Android Torque App
Monday, August 29, 2011 3:18 PM
I still havent tested more with mine other than that it connects. I need to do a full out GPS and such test.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Android Torque App
Monday, August 29, 2011 9:13 PM
what do you blower guys see for IAT's? i was showing low 140's while cruising....but take into account that it was also 110 out at the time.



Re: Android Torque App
Monday, August 29, 2011 9:13 PM
Thats about normal.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Android Torque App
Tuesday, August 30, 2011 12:10 PM
IAT's never went about 140 on the way to work. I got the pro version of the program to connect finally. Coolant temps got to about 207 with the a/c on if i sat at idle for a while, then went right back down to 200ish. But thats to be expected when its 113 outside. So no big deal. I'm not sure what the timing advance numbers mean, as I am still learning about tuning and stuff. I cannot seem to make it read knock though which kinda dissapoints me. I also had it show the vaccum/boost gauge, and it seems to be pretty accurate with the gauge i have in my pillar. so thats cool.

has anyone been able to get knock to read? if so, what setting/PID are you using?




Re: Android Torque App
Tuesday, August 30, 2011 1:14 PM
Weird I can read knock just fine. Maybe it's a GM reflash thing?



Re: Android Torque App
Tuesday, August 30, 2011 2:36 PM
Here are the 9 thing i have it set up to read and display right.





Re: Android Torque App
Tuesday, August 30, 2011 7:13 PM
Hmmm. In torque do this....

On the main screen of torque press your phones menu button,
Go to settings,
Scroll to manage extra pids/sensors,
Press menu again and go to clear list,
Then press menu again and tap add predefined set,
Then tap the Pontiac/GM option.

Then delete your non working guages and re do them.


Fyi if it doesn't say connected to ecu ok at the top then it will not show the data. And I highly doubt you will be able to read boost.

Another thing to check out is the adaptor status page. If it has any errors you won't connect either.


Edited 1 time(s). Last edited Tuesday, August 30, 2011 7:22 PM


Re: Android Torque App
Tuesday, August 30, 2011 7:17 PM
yup...i got it...the KR works now. what do you display on yours?



Re: Android Torque App
Tuesday, August 30, 2011 7:24 PM
I have the min and max guage on mine. I average like 0.6 or so. Some times it goes to a little over 1 but I haven't tuned my timing tables at all.



Re: Android Torque App
Tuesday, August 30, 2011 8:05 PM
ahhh the things i do at work...lol I just bleed my h/e system there was a bit of air in it. so maybe those temps will go down a bit. yeah ill test the KR readings out on my way home. so yeah. i should see almost none with the reflash though i think. i know it pulls redonkulous amounts of timing at any sing of anything wrong...so yeah.



Re: Android Torque App
Tuesday, August 30, 2011 8:21 PM
So I just tested out the 1/4 mile and horse power parts. Well hp sounds about right, 270 was what I was averaging on that and that sounds about what I should be making. Now the 1/4 mile may be wacked. My best time was 16.2 at 105mph, lol I suck at launching, but thats like a supra time slip.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Android Torque App
Tuesday, August 30, 2011 8:22 PM
so for the horsepower measurements, do you have to do like a hard launch or what? how does that work?



Re: Android Torque App
Tuesday, August 30, 2011 8:25 PM
HP you would do a 3rd gear pull, 4th gear would be more accurate but who wants to run all the way up to like 130?


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Android Torque App
Tuesday, August 30, 2011 9:17 PM
well i dont think mine HP part works. It wouldnt go about 147...i know i have more power then that...lol

anyone figure out how to read the logs yet?




Re: Android Torque App
Tuesday, August 30, 2011 9:35 PM
magic? No you have to setup a profile. I think a cavy weights about 1180 kilos.


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Re: Android Torque App
Tuesday, August 30, 2011 11:12 PM
Yeah the quarter mile thing is not correct. It says after my le5 mani, 36# injectors, tune, 60mm tb it says I ran a 18 sec lol my old 2.2 ln2 3 speed ran that lol.



Re: Android Torque App
Tuesday, August 30, 2011 11:43 PM
i have a profile set up and i am even on they forum. but the DEV doesnt have any way to read the logs yet that i know of.



Re: Android Torque App
Wednesday, August 31, 2011 6:21 AM
SLO CAV (autocrossing dude) wrote:

Yeah the quarter mile thing is not correct. It says after my le5 mani, 36# injectors, tune, 60mm tb it says I ran a 18 sec lol my old 2.2 ln2 3 speed ran that lol.


Yeah, now I dont feel so bad. DO we want to say it reads about 2 seconds slow then?


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search