AEM wideband sensor - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
AEM wideband sensor
Tuesday, April 03, 2012 8:20 PM
So I need a new sensor for my AEM. Is there a part # floating around? I need to get this pretty much ASAP. I got one from a buddy of mine that was brand new, but the connector is different. Any ideas?




Re: AEM wideband sensor
Tuesday, April 03, 2012 8:35 PM
ill go look in my book. I just bought one last week,

book says, 30-2001 for the sensor part number.


Edited 1 time(s). Last edited Tuesday, April 03, 2012 8:39 PM


Re: AEM wideband sensor
Wednesday, April 04, 2012 3:23 AM
Thanks Vince. Was that a Bosch part number?



Re: AEM wideband sensor
Wednesday, April 04, 2012 6:33 AM
Nope. We make one part number 24302 same connector.



Re: AEM wideband sensor
Wednesday, April 04, 2012 7:47 AM
Was just the number right out of the book. I think its a bosch sensor but did not say what the connector was. sorry.



Re: AEM wideband sensor
Wednesday, April 04, 2012 2:14 PM
Here is the info you are looking for

NTK is a 24321

Bosch is a 17014



Re: AEM wideband sensor
Wednesday, April 04, 2012 3:13 PM
Thanks, got the sensor # 24302 ordered today but wasnt able to pick it up before they closed, so I will get it tomorrow.



Re: AEM wideband sensor
Wednesday, April 04, 2012 8:19 PM
Wrong sensor see previous post....



Re: AEM wideband sensor
Thursday, April 05, 2012 4:41 AM
I saw that after, grrrrr!!!!!!!




Re: AEM wideband sensor
Thursday, April 05, 2012 9:18 AM
Do you have a pic of either of those? I have the Bosch one and the connector is wrong.
If I can't find the right one, I may need to buy a whole new aem kit.



Re: AEM wideband sensor
Thursday, April 05, 2012 9:50 AM
Yep what is your email?




Re: AEM wideband sensor
Thursday, April 05, 2012 10:26 AM
Here ya are buddy..









If you have any other questions please let me know.



Re: AEM wideband sensor
Thursday, April 05, 2012 1:35 PM
That's the same connector I have on the new sensor, but it's different to the connector on my AEM.



Re: AEM wideband sensor
Thursday, April 05, 2012 2:49 PM
Could you take a picture of the aem connector or old o2 connector?



Re: AEM wideband sensor
Thursday, April 05, 2012 3:12 PM
Does your aem have a latch over the top if so its a 24301 let me know if you need a connector pic, it's square.



Re: AEM wideband sensor
Thursday, April 05, 2012 3:47 PM
Mine does have a latch over it.



Re: AEM wideband sensor
Thursday, April 05, 2012 7:56 PM
It's a square 6 pin connector? White? If so its a 24301



Re: AEM wideband sensor
Thursday, April 05, 2012 9:17 PM
I will take a pic next week when I work on it again.



Re: AEM wideband sensor
Friday, April 06, 2012 6:31 AM
Ok



Re: AEM wideband sensor
Tuesday, April 10, 2012 5:57 PM
This is my connector.




Thanks in advance guys.



Re: AEM wideband sensor
Wednesday, April 11, 2012 1:56 PM
You need a 24301




Re: AEM wideband sensor
Wednesday, April 11, 2012 8:01 PM
Picked up a denso one today. Turns out the guy I was dealing with at the parts store was a dick. Went to the other guy and he pulled out a book that showed pics of the sensors and connectors. Had one there in an hour.



Re: AEM wideband sensor
Friday, April 13, 2012 9:22 AM
Damn I saw this late, you could of ordered a sensor from Jegs. I did that a while ago.



Down and out again!!

2012 numbers
328 HP
306 TQ


Re: AEM wideband sensor
Friday, April 13, 2012 9:44 AM
its been awhile, but I remember reading the one from a 2000 Volkswagen Beetle 1.8L Turbo is a direct replacement, Bosch 17053.
link to it on Autozone



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search