SpeedRacerZ wrote:Shifted wrote:^ We may be kinda screwed as far as 2-3 bar map sensors go, I'm trying to get more information from Keith, but his last communication with me this afternoon said that they don't support 2/3 bar upgrades on the 4 cylinders 
I'm going to see if I can get him the GM S/C program if he can use that at least for the 2k+ 2.4L's...
you have to be ****in kidding me......
well i can stop waiting for that then..... thats what the whole reason for hp tuners to come out to help everyone with tuning. boosted or not
http://www.cardomain.com/ride/827643
boost will be soon for me....
amen. i guess forget about hptuners...
Blew it up
Just a question, okay I'm running nitrous on my 2.2 ecotec, without the nitrous I am running pretty rich could HP tuner software help me out any at all?
so really this would be for N/A tuning only correct?
whats up anthony.........yeah for us 4 bangers.......unless you got a v8 stuffed in it.....
awesome, looks like i'm getting the software then....i hear a well tuned 2.2 ecotec can put out 170 crank i dunno if that is true but that would be nice...does this software get rid of the top speed limiter?
very nice...i think this software will be very good in what i have in plan for it, with my setup shifted what woudl you recommend I use the credits that I will be getting whenever this comes out?
hahahahahahaha you've got to be joking... all this time, and they're not supporting 2-3 bar map sensors? are these guys just that stupid, or do they LIKE not making money? I mean, for N/A guys it'll be great but how many on here do you see doing N/A builds?
I might have use for it if and when the OHV N/A project gets into swing, but seriously, what an incredibly DUMB decision on their part.
Arrival Blue 04 LS Sport
Eco
Turbo
Megasquirt
'Nuff said
UPDATE!!!!!!!
Chris from HPT wrote:
If there is factory 2bar calibrations then we will support it.
Most of the 4 cyl cals are TPS or MAP based on the VE table.
I would expect a beta announcement for the Cavaliers next week sometime.
Chris...
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
so for the gm supercharged guys thats a good thing???
2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |
SWEET!
2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |
Shifted wrote:UPDATE!!!!!!!
Chris from HPT wrote:
If there is factory 2bar calibrations then we will support it.
Most of the 4 cyl cals are TPS or MAP based on the VE table.
I would expect a beta announcement for the Cavaliers next week sometime.
Chris...
f'ing about damn time. so its again $600 bucks i can get the basic software with all the cables ready to work with my car correct?
oh nice man 500 bucks is cheap as hell for something this powerful, deffinatly picking this up ASAP
SOOOO will it STILL only support 2000 and up that can be S/C reflashed and NOT 1995-1999????
"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"
Damn, that sux for me and alot of others. I thought I read were a couple of 99 guys had their ECM reflashed with the GM S/C program.
Jason
99 Z24
Racers Edge
Johnny Mack Turbo Systems
Engineered Performance
It should be possible.......... you SHOULD be able to copy the fuel maps, ignition maps, and everything, and down load it into the 96-99 pcms........ its at least worth a try.
People have put the 00+ PCM into a 97-99, and only thing it didnt do was power the gauge cluster......... so it SHOULD be possible.
SPD RCR Z -
'02 Z24 420whp
SLO GOAT -
'04 GTO 305whp
W41 BOI -
'78 Buick Opel Isuzu W41 Swap
if the OS didnt support something in 96-99 cars this software wont help that. a new OS would have to be written combining aspects of the 2 (pre 00 and 00+), but good luck getting it supported. also as shifted has said before, you must be VERY good with moto assembler AND very bored. this is GREAT news for the eco guys! the eco s/c program has a 3 bar map (if we can find it) so i'm told and im sure could be flashed to a 00+ ecu for eco swaps.
good news about the OS, now we need to get them a eco s/c ecu
Sven you totally quarterloafed your computer..
I haven't seen anywhere that they said they would support the 2.2 eco s/c reflashed ecu. I know about the cobalt ss, but they aren't the same exact reflash.
15.574 @ 89 mph stock
DanteMustDie wrote:I haven't seen anywhere that they said they would support the 2.2 eco s/c reflashed ecu. I know about the cobalt ss, but they aren't the same exact reflash.
I just posted that they said they would....
They said that they would support 2 bar enhancements on any vehicle that can get the reflash from a dealer. I don't think you would have to get your car reflashed then get this software, I think they can use the OS and provide the reflash through this, but they said they would support it.
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
