TUNING SOFTWARE - Beta testers - Page 3 - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: TUNING SOFTWARE - Beta testers
Wednesday, September 08, 2004 12:29 AM
I sent you an email some time ago, just wondering if you recieved it. I have a 97 GAGT 2.4L with the auto transmission. <br>

<a href="http://www.quad4forums.com/~darkfox">
<img border="0" src="http://www.quad4forums.com/~darkfox/head.jpg" width="398" height="73">

Re: TUNING SOFTWARE - Beta testers
Thursday, September 09, 2004 5:50 PM
yea I got it

the list has been submitted - Keith will probably take a while to check it out since he's quite busy. Those who get chosen let us know! It should only be a few weeks if not sooner

And now I'll return to tweaking OBDI programs - Honey! Bring me my burner!!

Good luck guys!
<br>


Beauty is in the eye of the beer holder.


Re: TUNING SOFTWARE - Beta testers
Friday, September 17, 2004 12:23 AM
Hey just bumping this post and wondering if anyone got an email back, or if anyone has been chosen?

Let us know if you hear anything!

I can't wait until this hits the market, gonna be a huge step for the J-Body's and I think it is long overdue...

Later,
Jeff <br>

--------------------------------
2000 Silver Z24 5spd
Cardomain Site
Pictures and Information of Z24 Turbo Project
Re: TUNING SOFTWARE - Beta testers
Saturday, September 18, 2004 5:00 AM
Hey Robogeek, I was wondering if there's any news on the eta for the HP Tuners software for the Ecotec J Body? Let us know, thanks.

<br>

2004 Sunfire, 5 speed, billet aluminum short shifter
AEM CAI, experimental cams
FRD 68 Anthracite 17",215/45/17Y Ventus K104
Progress Springs, KYB AGX
Hawk HP/slotted rotors
148.8hp@5300, 155lb-ft@3800(@ the wheels)

Re: TUNING SOFTWARE - Beta testers
Monday, September 27, 2004 8:16 PM
^Bump

Has anyone been contacted yet?

Any new updates on this either?

I am seriously interested in getting a hold of this.

Let us know please

Later,
Jeff <br>

--------------------------------
2000 Silver Z24 5spd
Cardomain Site
Pictures and Information of Z24 Turbo Project
Re: TUNING SOFTWARE - Beta testers
Tuesday, September 28, 2004 6:42 AM
I'll check with them.. been so busy with my business and buying a house I haven't been keeping up.
I don't think they've picked anybody yet though. Beta should be about done by now I would think, which means they should pick soon

<br>


Beauty is in the eye of the beer holder.


Re: TUNING SOFTWARE - Beta testers
Tuesday, September 28, 2004 8:29 AM
Beta Theta Alpha Omega.... all I care about is wondering if it will be compatable with other 2.4L equipped cars such as oh... say an N-body such as mine...

2.4L 5spd... same wiring, pretty sure the bcm is all wacky different. <br>

-Trailblazer SS - not so custom 6.0L - custom intake - custom tune
- (1) 2.4L on an engine stand (1) blown trans (2) good quad trans (1) eco trans = party

Re: TUNING SOFTWARE - Beta testers
Tuesday, September 28, 2004 10:36 AM
to clarify for those not software lingo savy.. here are the steps software usually takes (very simplified)

1. Aplha (usually unusable and only of interest to programmers)
2. Beta (mostly usable but doesnt contain all features and isnt tested fully)
3. Release Candidate (all final features are included but not completely tested) RC1, RC2...
3. Final Release (tested and completed) <br>


Sven you totally quarterloafed your computer..
Re: TUNING SOFTWARE - Beta testers
Tuesday, September 28, 2004 10:37 AM
2.4! sorry just getting anxious. <br>

<IMG SRC="http://j-body.org/registry/paul7878/amsoillogo_iso1.gif">

"Ribbed for her pleasure, but I turned them inside out".
~Dick Solomon 3rd rock from the sun~
Re: TUNING SOFTWARE - Beta testers
Tuesday, September 28, 2004 11:58 AM
actually, its only beta to test for any little 4 banger quirks. The software is out and stable

<br>


Beauty is in the eye of the beer holder.


Re: TUNING SOFTWARE - Beta testers
Tuesday, September 28, 2004 2:49 PM
Hey ROBO... I will be needing to get a cheap used lap top, so I can run the HP software. What kind of requirements do I need to look for in the computer department? <br>

<img src="http://registry.gmenthusiast.com/images/sinistercav/dasig.gif">

Re: TUNING SOFTWARE - Beta testers
Tuesday, September 28, 2004 3:35 PM
all I'm knowing is..... I'm scratching to buy one... It'd give me something to do... <br>

-Trailblazer SS - not so custom 6.0L - custom intake - custom tune
- (1) 2.4L on an engine stand (1) blown trans (2) good quad trans (1) eco trans = party

Re: TUNING SOFTWARE - Beta testers
Tuesday, September 28, 2004 8:01 PM
Hybridcav wrote:

Hey ROBO... I will be needing to get a cheap used lap top, so I can run the HP software. What kind of requirements do I need to look for in the computer department?


i have an old IBM laptop that should be good enough. i have been meaning to get it imaged anyway. if you are interested email me.

i also have an older desktop, monitor and what-not and should be able to scrape up a long serial cable. i have too much of this stuff laying around. if anyone is interested let me know. <br>


Sven you totally quarterloafed your computer..
Re: TUNING SOFTWARE - Beta testers
Tuesday, September 28, 2004 10:07 PM
ok just to make sure im understanding this all right, once this is all finalized and is released for purchace will anyone be able to buy it for there own personal use at home? this sounds very awesome and would be great to have
Re: TUNING SOFTWARE - Beta testers
Thursday, September 30, 2004 12:33 AM
I wanna jump on the dyno for a day, and just play with the software . Sounds like a good way to kill an afternoon! I'm just dieing to get my hands on software like this so that I can play with this motor and see what it likes! So far, I'm impressed, but I'd still like to get to know this engine's characteristics a bit better! Nothing a car, some wires and a couple of dyno rollers couldn't fix . I WANNA BREAK SOMETHING !!
Re: TUNING SOFTWARE - Beta testers
Tuesday, October 05, 2004 5:05 PM
ANY NEWS!?!?!?!?!

<br>


Re: TUNING SOFTWARE - Beta testers
Saturday, October 16, 2004 5:35 PM
Anything yet?

It has been a while now.

Let us know please.

Later,
Jeff <br>

--------------------------------
2000 Silver Z24 5spd
Cardomain Site
Pictures and Information of Z24 Turbo Project
Re: TUNING SOFTWARE - Beta testers
Saturday, October 16, 2004 5:55 PM
according to brian from hp tuners all beta testers were chosen... <br>


LE61T PTE6262 Powered

Re: TUNING SOFTWARE - Beta testers
Saturday, October 16, 2004 6:53 PM
I want this software <br>


Re: TUNING SOFTWARE - Beta testers
Saturday, October 16, 2004 10:22 PM
Been wondering about the status of this too myself.
Re: TUNING SOFTWARE - Beta testers
Sunday, October 17, 2004 1:25 AM
Well, I'm wondering too....... <br>

Will race for food

..check out my miscellanous mods

Re: TUNING SOFTWARE - Beta testers
Sunday, October 17, 2004 4:12 AM
Robogeek, I had a couple of questions. As I will be using a 3400 v6 from a Grand Am and there is already some software for that.

First - what the hell is 'transmission abuse mode'
2nd - Can I use the software to eliminate the automatic tranny controls since i'll be running a 5spd?

<br>

<img src ="http://www.j-body.org/registry/shooff/personal_pic.jpg">
Noise doesnt add horsepower. Horsepower adds noise.
"This is one 2.2 I wouldnt mess with" - DropTopPaul
Re: TUNING SOFTWARE - Beta testers
Tuesday, October 19, 2004 9:10 AM
Face wrote:

I beleive serial can either be 25 PIN or 9 PIN. The 25PIN on the PC is female which is a parallel port for printers. The serial is a 25 PIN male which is serial as well. DB-9 and DB-25.


Finally some1 else computer savvy!! Haha. AA in Computer Networking, A+ Core done, A+ OS soon (for the full A+ Cert). Might go into cars, MECP, ASE, dunno yet. I wanna do Multimedia & computer set-ups in vehicles.

This software is sounding pretty sweet. I'll have to revert my laptop back to XP again. Running Lindows right now. <br>

Hmm... I need a sig!
Re: TUNING SOFTWARE - Beta testers
Tuesday, October 19, 2004 11:10 AM
Paul aka Midwestracer wrote:

This software is sounding pretty sweet. I'll have to revert my laptop back to XP again. Running Lindows right now.


Please don't.... it doesnt want that trash either

www.winehq.com

im wondering what they used for a windowing agent in their code. hopefully not Windows.F orms. if they used GTk# or GTk+ then things will ge great for linux/MAC OSX guys. although i doubt they used GTk# since it is rather new. maybe ROBO can get us/me some info on this and maybe i can put together a linux/MAC OSX install HOW-TO. <br>


Sven you totally quarterloafed your computer..
Re: TUNING SOFTWARE - Beta testers
Tuesday, October 19, 2004 11:13 AM
yeah one of these years i need to go take the tests... <br>


Sven you totally quarterloafed your computer..
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search