Coming soon... - Page 11 - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Coming soon...
Wednesday, January 23, 2008 3:20 PM
shift is a jbody god.




Re: Coming soon...
Thursday, January 24, 2008 8:50 AM
Hey shifted.....I hope you plan on ripping off the source code from the megasquirt for a base code cause it will seriously be a very long time before you could have even near the robust operation with all the bells and whistles the MS has just from a straight code point of view. I cant wait to see this in beta and how you get it there!
Re: Coming soon...
Thursday, January 24, 2008 10:35 AM
The MS code will be a base, but its going to be restructured, I can't imagine how that code is servicable, its a mess. Mostly I'll just be borrowing the algorithms.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: Coming soon...
Thursday, January 24, 2008 12:02 PM
Ron,
Could you update your site you dedicated to the ecm so we know how far along you are with it please? thanks!



Re: Coming soon...
Thursday, January 24, 2008 2:40 PM
Shifted wrote:The MS code will be a base, but its going to be restructured, I can't imagine how that code is servicable, its a mess. Mostly I'll just be borrowing the algorithms.


hahaha....yeah its pretty tough to go through. But not impossible, I've done several code modifications myself and they all worked....lol.

EDIT::

Have you decided what your going to use to drive the coil igniters?...............VB921's? or IGBT's?

Edited 1 time(s). Last edited Thursday, January 24, 2008 2:42 PM
Re: Coming soon...
Thursday, January 24, 2008 5:33 PM
yes!....
Re: Coming soon...
Thursday, January 24, 2008 7:38 PM
Joshua Dearman wrote:
Shifted wrote:The MS code will be a base, but its going to be restructured, I can't imagine how that code is servicable, its a mess. Mostly I'll just be borrowing the algorithms.


hahaha....yeah its pretty tough to go through. But not impossible, I've done several code modifications myself and they all worked....lol.

EDIT::

Have you decided what your going to use to drive the coil igniters?...............VB921's? or IGBT's?


ICM will take care of the coil igniters for now, later I'll re-design the ICM and integrate that in, but for now I just want to signal it to fire and not worry about the circuitry.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: Coming soon...
Friday, January 25, 2008 2:11 AM
Are you going to integrate a VR input to generate your SQ-wave yourself from the crank trigger or let the ICM pass you the SQ-wave signal? -It doesn't really matter as far as tuning goes but for all out precision, a VR input to allow a larger tooth wheel like a EDIS native 36-1 or maybe 60-2 or maybe even (flywheel teeth+ crank TDC) would be really cool.....maybe just keep it in mind for future upgrade right now. It will be hard enough to get this all going as it is.... :-)
Re: Coming soon...
Friday, January 25, 2008 4:37 AM
I will be putting a VR input on there to be able to read the 36-1, 60-2, or the 7 pulse signal directly from the ICM. The goal is to be able to have it user selectable as to the number of teeth, skip teeth, and source.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: Coming soon...
Wednesday, January 30, 2008 7:26 PM








4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: Coming soon...
Wednesday, January 30, 2008 10:04 PM
mmmm i see stand alone in my boosted future!

Re: Coming soon...
Friday, February 01, 2008 6:07 AM
looks good Ron.

all through-hole though? no SMT? lol

j/k


Desert Tuners

“When you come across a big kettle of crazy, it’s best not to stir it.”


Re: Coming soon...
Friday, February 01, 2008 6:47 AM
LOL, yeah, not feeling like tweezering these prototype boards together. Perhaps at some time in the future, for now they'll all be stuffed by me, and I'm more comfortable with through-hole than SMD.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: Coming soon...
Friday, February 01, 2008 6:55 AM
SMT is easier than through-hole for me.

btw, just re-certed IPC A-610. J-STD is coming up next month.


Desert Tuners

“When you come across a big kettle of crazy, it’s best not to stir it.”


Re: Coming soon...
Saturday, February 02, 2008 6:44 AM
soo, when can we get one for the drag car?


Chris


'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Re: Coming soon...
Monday, February 04, 2008 11:22 AM
^^Yes....i know there is no promises but i am counting on this to run my car so is it looking like a this spring type of deal?
Re: Coming soon...
Tuesday, February 12, 2008 10:26 PM
SHIFTED:

This will be the best thing...
IN EVER.

You have just inspired me to go back to college.
Seriously.
You rule.


ZZZZZZZ
Re: Coming soon...
Thursday, February 21, 2008 6:36 AM
I just got done reading this whole thing... My head hurts. I can kind of relate being a GM tech because i have programmed a few ecm's but yeesh! This is just techno-god speak beyond belief. And sounds too good to be true! But I'll definitely be in line for one to smooth out this tuning process with my 2.4/2.3 hybrid. Great Job!!!




Re: Coming soon...
Sunday, March 02, 2008 12:24 PM
Any updates??
Re: Coming soon...
Sunday, March 02, 2008 1:36 PM
Had a bad motorcycle wreck, broke 5 bones, so I've been a bit layed up. I'll get back on it as soon as I can though.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: Coming soon...
Sunday, March 02, 2008 2:53 PM
ouch man glad your ok, motorcycles are dangerous.....



R.I.P. Brian Klocke, you will never be forgotten

Re: Coming soon...
Sunday, March 02, 2008 6:00 PM
oh damn..get better man
Re: Coming soon...
Tuesday, March 04, 2008 3:37 PM
Boosted2point4 wrote:ouch man glad your ok, motorcycles are dangerous.....
yea, we both know first hand... I wish ya a speedy recovery Ron....



P&P Tuning
420.5whp / 359.8wtq

Re: Coming soon...
Sunday, March 23, 2008 5:36 PM
Can't let this go to page 2. I hope your recovering well man. Any updates?



Re: Coming soon...
Sunday, March 23, 2008 7:32 PM
Can't solder with one arm, not many updates, but since my projects at work are kind of similar (working with microcontrollers), it's still moving forward in a sense.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search