Emanage and Low Impedance Injectors - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Emanage and Low Impedance Injectors
Tuesday, July 26, 2005 6:24 AM
I'e had the emanage installed for a while and I've been receiving low injector duty cycles with the real time display. I asked around and no one gave me a straight answer. I went to tune my car at the dyno and the low duty cycle is making it impossible to get to my target AFR. I'm currently using 315cc but I just ordered 441cc injectors, I need to know if I'm seeing low duty cycles because my car has low impedance injectors if so what do the guys running the emanage on a pre-2000 car do. I'm almost ready to sell the emanage and go with the Jbodyperformance reflash. Sorry for the long post, all help appreciated.






Re: Emanage and Low Impedance Injectors
Tuesday, July 26, 2005 6:41 PM
I guess I'm on my own




Re: Emanage and Low Impedance Injectors
Tuesday, July 26, 2005 7:05 PM
on my ecotec, i put in 10 ohm resistors on each low imped injector, but i am not sure about the low injector duty cycles. my car with the e-manage installed is running fine, but i am still working on the fuel issues in boost.



Re: Emanage and Low Impedance Injectors
Tuesday, July 26, 2005 7:41 PM
how did you attach the resistor, on what wires. When you view your duty cycle in real time they look normal?





Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search