Emanage-- Do you need this stuff? - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Emanage-- Do you need this stuff?
Friday, April 29, 2005 4:25 PM
Hey Hey...

My plan for getting the SDS standalone fell through- i needed all types of stupid @!#$ for it to work- and it was like 1200 bills... I got an emanage instead...

Before I ordered this, I purchased a 255lph fuel pump, Adj. FPR, and 35lb injectors...

Do i need to use the FPR, or larger fuel pump w/ the emanage...? If its not needed, will it hurt?
Can I use the Adj. FPR to get the fuel pressure right for the larger injectors?

I was gonna run about 5 psi to get my feet wet, and turn it up to about 7-8 until I replace some of the internals & trans...

Thanks for any input.




<img src=http://www.consumptionjunction.com/i/default03.gif>

Re: Emanage-- Do you need this stuff?
Friday, April 29, 2005 4:44 PM
the afpr is good if your using really large injectors, but then you will have to calculated what lbs there at for the set psi and then put that into the emanage other wise you your calculations will be off if you put there normal rating, also if you got 35lb brown tops there not not 35lbs at stock 43.5 there 38lbs so just keep that in mind

also the larger pump wont hurt anything




Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search