Any one have the 00-01 LD9 2 Bar flash for HPT? - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Any one have the 00-01 LD9 2 Bar flash for HPT?
Tuesday, December 04, 2012 8:44 AM
Hi, Im trying to find the Ld9 supercharge flash in a HP tuners file. I have a 2000 2.2 LN2 cavalier Im looking to run a very small amount of boost in and I have HPT for my camaro already. Does any one have a file modified to run with the OHV motor? If not what has to be changed in it to make it work?

Austin


96 Camaro A4 383 12.5:1, E85, Full suspension, Nitrous outlet plate kit, hooker headers and catback, 3800 circle D converter.

2002 Silverado LQ4 6.0 CAI, Long tube headers, 4" exhaust

1996 s10- 97 ECU and wiring, soon to be boosted daily driver.

Re: Any one have the 00-01 LD9 2 Bar flash for HPT?
Tuesday, December 04, 2012 10:41 AM
You fit a LD9 charger on a 2200? Or any charger at all? Pictures???



Re: Any one have the 00-01 LD9 2 Bar flash for HPT?
Tuesday, December 04, 2012 10:48 AM
He just wants to run the reflash from the m45 kit. The 00-02 ecu on the ohv cav's can run the sd tune as well. We've got it on our turbo ln2 as well as many others.







Re: Any one have the 00-01 LD9 2 Bar flash for HPT?
Tuesday, December 04, 2012 11:15 AM
Thats right Jucnbst just looking for the reflash file would you happen to have it? The setup thats sitting in the garage is a smaller saab 900 oil cooled turbo with t3 flange, saab 900 intercooler, internally gated. 24lb/hr injectors and will most likely be running the ebay cast manifold for now.

This setup is for 4-5 psi of boost, fuel mileage and my entertainment lol Its not meant to be quick.


96 Camaro A4 383 12.5:1, E85, Full suspension, Nitrous outlet plate kit, hooker headers and catback, 3800 circle D converter.

2002 Silverado LQ4 6.0 CAI, Long tube headers, 4" exhaust

1996 s10- 97 ECU and wiring, soon to be boosted daily driver.
Re: Any one have the 00-01 LD9 2 Bar flash for HPT?
Tuesday, December 04, 2012 11:58 AM
You can get it on hptuners.com in the tune repository. There are two, one for the auto and one for the 5 speed.

But u will also need a jbody configuration. This is set up to read the sensors and provide data.

With ur set up idk, do u need to do the ld9 pcm swap too? U might.


GMR has got nothing on this
Re: Any one have the 00-01 LD9 2 Bar flash for HPT?
Tuesday, December 04, 2012 12:05 PM
Go to HPTuners repository on their website. Download a m45 reflash. Modify the injector constant for what ever injectors your are running. Flash it over. You probably will have to do a theft relearn since the VIN will now be different. After the relearn start the car and let it idle, and see if you need to tweak the idle tables. I assume you'll be running a wideband, and using it with your HPTuners?


Where is Ryan when you need him. lol




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Any one have the 00-01 LD9 2 Bar flash for HPT?
Tuesday, December 04, 2012 1:14 PM
-MD- Enforcer wrote:You probably will have to do a theft relearn since the VIN will now be different.


Or you can go to system>general and disable Vats and Vats Fuel Cut .















Save your money. It might be worth something someday.

Re: Any one have the 00-01 LD9 2 Bar flash for HPT?
Tuesday, December 04, 2012 2:45 PM
I've talked to Ryan a little bit Before. Yes I plan on taking my wideband out of my camaro and putting it in the car during tuning. I have not registered my HP interface with their website yet so that would be why I couldn't find their repository. It still isnt allowing me to make an account even with my serial number and activation key. Sent them an e-mail. Thanks for letting me know where I could get it.

As far as I know the computers are the same, and the engine is ran my the same sensors. Just a 2 bar map will need from what I read.

Back in 05 I had a boosted 97 cavalier, I lifted the ring lands on a couple pistons. This was on 6 psi, I would like to think this was because I was inexperienced and had it running on too small of injectors, untuned with a cartech FMU and being non-intercooled.

How reliable have you guys been on stock bottom ends running the flash? The setup will be intercooled and obviously running the 2 bar flash. Only looking to run 3-4psi most likely and will be moving the rev limiter down so I can't beat on it. This is one of those things im doing because I can. It sounds dumb but its just one of those little projects its hard to say no to.


96 Camaro A4 383 12.5:1, E85, Full suspension, Nitrous outlet plate kit, hooker headers and catback, 3800 circle D converter.

2002 Silverado LQ4 6.0 CAI, Long tube headers, 4" exhaust

1996 s10- 97 ECU and wiring, soon to be boosted daily driver.
Re: Any one have the 00-01 LD9 2 Bar flash for HPT?
Tuesday, December 04, 2012 3:29 PM
The LN@ has been pushed to 274whp on a stock bottem end and like 12psi. So with a good tune 4 psi will be a cake walk.



FU Tuning



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search