Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!! plz - Exterior Forum

Forum Archive
This thread has been archived. Posts that have been archived can not be replied to.
Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!! plz
Tuesday, February 03, 2004 5:34 PM
Hi I was wondering if anyone could help me out with a problem I have... I want the new aerogear rear bumper but its only for single exhuast and I have dual. Would it be hard or too much work to cut through the fiberglass?? would it crack??? please help!

Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!! p
Tuesday, February 03, 2004 6:13 PM
Hey Alex, this is not a problem. I bought a blitz kit and the blitz kit came with the drift back bumper. Im sure you know how it looks like. Well, on the drift back bumper there is an ugly flap on it below the bumper. What I did was dremel the flap away. It cut perfectly, no cracking. The dremel is a handy tool, if you got a target or k-mart around, it should cost around 30 bucks. Good luck.

97z24- ported throttle body, cold air intake, aem alt. pulley, obx exhaust.
Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 6:21 PM
Would that tool be good for cutting circles... ok I am getting that that new aerogear back bumper have you seen it? well its only for single exhuast and i have dual... and the pre-cut hole its kinda of a shape circle or a square. Is there anything different you suggest or is it all the same? thanks
Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 6:26 PM
how about you help me with a problem i'm having alexandra. i worked hard for $95 and you conveniently ripped me off. how about you return my money or ship me the rear bumper that you promised me. i didn't want to resort to this method, but all the e-mails to you have gone unanswered since last november. please get ahold of me so we can work this out.
<br>


Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 6:32 PM
What are you talking about?? I dont know you who your looking for but i think you have the wrong person... check my profile man... alex short for alexander... whatever you problems you having try sending emails to that person


cannon fodder wrote:how about you help me with a problem i'm having alexandra. i worked hard for $95 and you conveniently ripped me off. how about you return my money or ship me the rear bumper that you promised me. i didn't want to resort to this method, but all the e-mails to you have gone unanswered since last november. please get ahold of me so we can work this out.

Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 6:37 PM
I think you should try your search again.... I have no rear bumpers but the one that came with the car when i brought it from friend...
Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 6:37 PM
you want the e-mails? i'll post them here.
<br>


Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 6:41 PM
check my email the only one i have is ashkat86@hotmail.com... is that the person your lookings for????

cannon fodder wrote:you want the e-mails? i'll post them here.

Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 6:44 PM
alex jones... nice try.

here's a segment from an e-mail... from you:

>From: Alex Alexsvich
>To: "Tony H."
>Subject: Re: stock 2k sunfire bumpers
>Date: Tue, 30 Sep 2003 09:33:47 -0700 (PDT)
>
>
>Ok good deal then. Just let me know when you send out the money and I will
>keep a look out for it. Thanks
>
>3003 North 21st Street
>Superior, WI 54880

Alexandra Alexsevich is registered at that address... you can change the info in your registry all you want.

i can also pull up your court record in the state of wisconsin confirming your address as the one stated above. the e-mail address from the e-mails that i recieved from you is: modfire007@yahoo.com which is also listed on the cardomain page that you conveniently removed from your registry... recognize the car on this cardomain page? http://www.cardomain.com/id/midwestjfactor

i have a photocopy of the money order that YOU signed and cashed. just return the f*cking money.
<br>


Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 6:50 PM
too bad i live at 630 north 57th ave west #2, duluth,mn 55811 so look that up on my records

cannon fodder wrote:alex jones... nice try.

here's a segment from an e-mail... from you:

>From: Alex Alexsvich
>To: "Tony H."
>Subject: Re: stock 2k sunfire bumpers
>Date: Tue, 30 Sep 2003 09:33:47 -0700 (PDT)
>
>
>Ok good deal then. Just let me know when you send out the money and I will
>keep a look out for it. Thanks
>
>3003 North 21st Street
>Superior, WI 54880

Alexandra Alexsevich is registered at that address... you can change the info in your registry all you want.

i can also pull up your court record in the state of wisconsin confirming your address as the one stated above. the e-mail address from the e-mails that i recieved from you is: modfire007@yahoo.com which is also listed on the cardomain page that you conveniently removed from your registry... recognize the car on this cardomain page?

i have a photocopy of the money order that YOU signed and cashed. just return the f*cking money.

Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 6:51 PM
you are a bullsh*t liar.
<br>



Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 6:56 PM
whatever the hell is going on... i dont think its very cool of whoever your looking for to post private information true or untrue maybe you should just try @!#$ private messages
Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 7:03 PM
i have tried sending her f*cking e-mails, she won't reply.

let's see you reply to this:

SAME CAR ON BOTH THE CARDOMAIN PAGE AND REGISTRY, E-MAIL ADDRESS IS THE SAME AS STATED ABOVE, DATE OF BIRTH IS THE SAME AS ON THE COURT RECORD, ALEX'S REGISTRY WAS LAST UPDATED TODAY WHEN SHE CHANGED IT TO SHOW A DIFFERENT NAME "ALEX JONES"... shal i continue?







I DON'T F*CKING MAKE THIS KINDA SH*T UP! I AM DEAD SERIOUS I WANT MY F*CKING MONEY BACK NOW!
<br>


Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 7:04 PM
NOW QUIT BULLSH*TTING AROUND AND GIVE ME MY MONEY BACK!
<br>


Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 7:10 PM
i might also add that the link on the cardomain page that says "pix at J-bod website" links directly to the registry for "alex jones".
<br>


Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 7:27 PM
want more?



sorry for the language she uses, i didn't want to censor anything.
<br>


Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 9:30 PM
I think it's time for a drive/flight. Southwest.....$66 flights or something like that. Worth it to get the $95. <br>

[ <a href="http://www.j-body.org/chat/">J-body Chat</a> ] [ <a href="http://www.highrevmotorsports.com">High Rev</a> ]
<img src="http://www.j-body.org/registry/steve75/personal_pic.jpg">
Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 9:37 PM
Looks like someone needs to pay up, OR LEAVE!!!!! We don't need anyone like you around ripping people off, Alex <br>

www.TaillightTinting.com #1 SOURCE FOR VHT NITE SHADES
www.aPlusPerformance.com BACK ONLINE SOMETIME SOON!
PHONE 763-682-9945

Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Tuesday, February 03, 2004 9:54 PM
To add the second exhaust you can follow the steps I took to add duals to an Aerogear Cougar rear bumper. Pics are available at the link below.

Dual Exhaust Modification

<br>

<a href="http://www.street-concepts.net"><img src="http://www.j-body.org/registry/streetconcepts/personal_pic.jpg"></a>
Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Wednesday, February 04, 2004 10:06 AM
i like how it gets all quiet once the proof comes out for all to see

just pay the man the money he is due...simple as that

Phil Thacker
JCO North President

Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Wednesday, February 04, 2004 10:16 AM
i call that proof,. good job cannon,. I've been ripped off before, it's not fun..
GIVE CANNON HIS MONEY BACK,... you'll feel a lot better if you, you won't be a thief anymore, and maybe you'll remove one stain from your worthless POS soul. Atoning for your mistake is admirable, to deny it is not. <br>



www.drluc.ca

Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Wednesday, February 04, 2004 10:45 AM
wow you just got OWN3D. Nice cannon . pay him his money back, i have also been ripped off. My whole summers worth of money wasted. He obivously works for his money which i really respect and it is wrong to rip someone off. give it back to him. He has so much proof, your screwed. <br>

"It's not illegal until you get caught"
Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Wednesday, February 04, 2004 10:50 AM
OWN3D!!!!!!!!!


...sux to be you.

















although I still don't think it's right for you to post such private info on the net cannonfodder. But hey, I guess if it's the only way...
<br>


Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Wednesday, February 04, 2004 11:27 AM
it was already on the public domain for anyone to look at. it's not like i hacked anything to find private information. so like i said, it was all already on the public domain.

nothing is private anymore.

thanks for the encouragement guys.

as for you Alexandra, i WILL get my money back.
<br>


Re: Cutting fiberglass!!!!!!!! HELP!!!!!!!!!!!!!
Wednesday, February 04, 2004 11:43 AM
haha dude cannon SCHOOLED you....pay the dude his money <br>


Forum Archive
This thread has been archived. Posts that have been archived can not be replied to.

 

Start New Topic Advanced Search