Before S&R Racing in Tampa, FL got a hold of it...

Just swapped Valve train components and head gasket....

The rest of the photos were taken a week ago.... Some more polishing, wiring tucking, and finalizing to do in the next few weeks. Then Dyno tune and post numbers!!!!

blucavvy wrote:

Littleman wrote:heres a couple pictures of my vavle cover, not really the cleanest engine bay but its alright

did you paint the plastic intake manifold? for realz?

ya i stored the girl and painted it, i wish it was all matching paint mind you

Spencer wrote: i think it looks decent , compliments the intake IMO.

thanks many i've been getting some mixed reviews on it but mostly becuz nothing is matching paint thats why

Here is mine. Minus the Redtop I have now.

A little off topic, but did it cause any problems? I am getting a set of old easystreets and just want to know if there is anything to fix it or if I would have to replace it if it comes to it.

Spencer wrote:this is what the old easysterrt struts did when the isolator washers went bad. The new ones don t do it, i had the same problem with my old ones.

DSMskyline wrote:Sndsgood, whats up with your passanger strut mount?

never knew of a fix for them, i even got new parts and they eventually did the same thing. Easystreet redesigned them completely to fix the issue. I had a set of OEMs pillow mounts made for air ride on mine, fixed it alltogether till one locked up and had to replace then anyways.

This

I got this. Not much but in progress!!




http://carphotos.cardomain.com/ride_images/4/653/2569/39131284001_medium.jpg
Born to race, But raise to win!!!

jsoco wrote:This

looks like a dodge van, thus not a j-body, and has no place in this thread.



JBO Stickers! Get yours today!

well this is it. I have a GM strut bar sitting in the garage. Want to install that and a WAI intake... but am too lazy to build it right now... lol

Rich Grayo Jr. wrote:

jsoco wrote:This

looks like a dodge van, thus not a j-body, and has no place in this thread.

figured a zj was a form of j. just having a little fun

DSC_0185 by bobsoldbikes, on Flickr








BeardLife / Club Awesome Reject Blog

adam wagner wrote:i just had a hater come over saying if its not broken dont fix it lol

Maby he is jealous and knows that j-bodys are awsome.lol

core (strmtrooper) wrote:

a busted ass hack job WAI, and 14 year old rust proofing

hey.nice sunfire.can you tell me where you got youre hood and how much it costed.oh is it like a regular hood or is it fibeglass?The hoodi gotfor my sunfire is just a factory hood.needs lots of sanding and bondo to the low spots.gonna takesome time.thought the hoodyou have looked cool and lots ofpeople ive seen has them so yea.i like thoseheadlight lense too but they wouldnt right on my car.That would be way too much black.

adam wagner wrote:Under the hood pics. Would like to paint the 2.4L cam cover

URL=http://img52.imageshack.us/i/1000876s.jpg/][/URL]

yea i wanted to paint the cover also.i whent to walmart and looked at the engine paints and all they had wasoarange and black.i wanted to get silver.i guess i will check advanced autoparts next time.

Rich Grayo Jr. wrote:


looks like a dodge van, thus not a j-body, and has no place in this thread.

problem?

Eh, I guess I'll play too...




M62, 3.1" pulley, 60# injectors, ls1 tb, HPT meatcake tuned. 2nd is my favorite shot from the install pics, lol.

lafonjef wrote:A little off topic, but did it cause any problems? I am getting a set of old easystreets and just want to know if there is anything to fix it or if I would have to replace it if it comes to it.

Spencer wrote:this is what the old easysterrt struts did when the isolator washers went bad. The new ones don t do it, i had the same problem with my old ones.

DSMskyline wrote:Sndsgood, whats up with your passanger strut mount?

no problems yet (fingers crossed) the washers are definatly getting worse. and i will likely pull them this winter and see if i can have them repaired. don't want to go to the new struts if i don't have too.

http://www.flickr.com/photos/sndsgood/ https://www.facebook.com/#!/Square1Photography

noob question, i have a 2.2 ecotec and noticed alot of you had some giant ass thing infront of the engine bay....what is it? and whats the benefit of havin it

rob t wrote:noob question, i have a 2.2 ecotec and noticed alot of you had some giant ass thing infront of the engine bay....what is it? and whats the benefit of havin it

lol its ok, its a supercharger. It forces more air into the engine ( BOOST) more air+more fuel= more power. hoped this helped!

mmmmmmmmmm booooost

Modding my j since I found the org

sndsgood wrote:

lafonjef wrote:A little off topic, but did it cause any problems? I am getting a set of old easystreets and just want to know if there is anything to fix it or if I would have to replace it if it comes to it.

Spencer wrote:this is what the old easysterrt struts did when the isolator washers went bad. The new ones don t do it, i had the same problem with my old ones.

DSMskyline wrote:Sndsgood, whats up with your passanger strut mount?

no problems yet (fingers crossed) the washers are definatly getting worse. and i will likely pull them this winter and see if i can have them repaired. don't want to go to the new struts if i don't have too.

That's just one of the reasons why i ditched my airride. OEM did make a set of mounts for those struts that didnt fail in a month.




its an old concept. time for something new to take the reigns. - Z yaaaa

alejandro davila wrote: mmmmmmmmmm booooost

Agreed!!! Only wish I could afford it.....

Here is my 1985 type 10 cavalier ALL stock.

Ur car reminds me if our 87 rs that we traded in. 5*'s keep up the good work