Nate VV
metalball
Location: Colorado Springs, CO
Joined: Sunday, July 15, 2007
Last Update: Wednesday, October 11, 2017
Last Seen: Wednesday, March 7, 2018
Email: metalball@gmail.com
1998 Pontiac Sunfire GTAbout This Vehicle:
Car has been sold -- Oct 2017. No longer active on JBO. Body Style: Coupe
Color: Purple
Engine: 2.4L
Transmission: Manual
Interior: Charcoal
MODIFICATIONS
Engine:- - Exedy Stage 2 Organic Clutch
- Exedy Stage 2 Pressure Plate
- Fidanza Ultralight Flywheel
- MdLd9 Lightweight Crankshaft Pulley
- MdLd9 Lightweight Alternator Pulley
- Grand Prix Master Cylinder / ABS Motor Pack
- Rear Neon Disc Swap with Akebono Performance Pads and Premium Rotors
- Akebono Performance Pads in front calipers and Premium Rotors
- AEM polished short ram intake
- Gutted Catalytic Converter (poor man’s test pipe)
- SR*S 2.5” Stainless Straight Catback Exhaust System w/ grade 8 hardware
- Custom exhaust hanger modified from the 2.2l cavalier sedan (prior to rear axle)
- 12” XRP Stainless Steel Brake Lines x2 Front
- 18” XRP Stainless Steel Brake Lines x2 Rear
- 6” XRP Stainless Steel Brake Lines x2 Rear
- Wilwood 10psi Residual Pressure Valves x2 Rear
- XRP fittings for all SS lines install
- Overkill Engineering Motorsports (OEM) Clutch Reservoir Bracket
- NGK Platnium Spark Plugs x4
- MSD DIS-2
- (2) MSD Coil Interface Modules P/N 8870
- (2) MSD Coils
- Set of MSD 8.5mm Spark Plug Wires for 2.2l
- Custom bracket for complete MSD 2.2l conversion on LD9
Suspension/Wheels/Brakes:- - Tein SS-P Coilovers
- (In Storage) RKSport Pro Coilovers
- Continental ContiExtremeContact Tires
- Josh Dearman Rear Disc Brake Conversion Kit from Dodge Neon Sport
- Addco Front 1” Sway Bar
- Addco Rear 1” Sway Bar
- TTR lower k-brace
- Vibrant Front Strut Tower Bar
- Custom Rear Strut Tower Bar
- Polyurethane Sway Bar Endlinks
- Prothane Sway Bar Bushings for front and back sway bars
- Prothane Upper Motor Mount
- Prothane Lower Dogbone Mount
- Prothane Front Tranny Mounts
- Prothane Rear Tranny Mount
- SMG Welded Lower Control Arms with Prothane Bushings
Interior:- - B&M Part #45166 Short Shifter Kit Assembly
- 2002 Sunfire Interior Center Console Conversion
- Custom Tweeter Pods built into upper dashboard piece
- Custom fabricated speaker brackets in doors from 4”x6” openings to 6.5” openings
- Weight removal of underdash heating vents and electronics
- Relocation of airbag module from under passenger’s seat to under center dashboard in order to mount Alpine Crossovers
- New Emergency Brake Assembly
Exterior:Audio:- - Eclipse CD8445 8v dedicated pre-out Headunit
- Alpine PDX-1.1000 Amplifier
- Alpine PDX-4.150 Amplifier
- 10” Image Dynamics IDQ v.2 Subwoofer
- Alpine Type X (SPX-137r) 2-way Component Speaker Set
- Alpine F#1 Status 3-way Crossovers
- Alpine Type R (SPR-69c) 2-way Coaxial Speaker Set
- Directed Electronics Complete 0ga and 4ga Installation Kits
- Directed Electronics Digital 0ga-0ga ANL Fused Distribution Block
- Directed Electronics Digital 0ga-4ga Mini-ANL Fused Distribution Block
- Directed Electronics 3-1 Distribution Block
- Stinger Pro Bullet 20’ RCA Cables x3
- Stinger Pro 3-1 Distribution Block
- Stinger Pro Grounding Block
- Directed Electronics Solid Positive Battery Terminal
- Directed Electronics Solid Negative Battery Terminal
- XStatic Batcap Model 400 Capacitor/Backup Battery
- XStatic Batcap Model 800 Primary Racing Battery (800 CCA)
- (2) Bulk Packs of Dynamat Extreme Deadening Material
Miscellaneous:- Maintenance Items Completed:
- Replaced grade 5 hex bolts for rear wheel hubs with grade 8 17mm bolts
- New Clutch Slave Cylinder
- New Drivers side tranny axle seal
- New Passengers side tranny axle seal
- New AC motor
- New Delco Inline Fuel Filter
- New Camshaft Positioning Sensor
- New Crankshaft Positioning Sensor
- New IAT Sensor
- New MAP Sensor
- New A/C Motor
- New Greddy Oil Filter
- Replaced both drivers front and rear brake hard lines due to frozen fittings
- New control arm ball joints installed
Future:- - Headers
- Test pipe to replace gutted cat
- Battery relocation to rear passenger's side
- Remove IDQ sub and install dual JL 12w3v3 subs in custom enclosure
- Fiberglassed kick-panels
- PAINT!!!
| |
