GM Enthusiast Network  |  J-Body Organization  -  Ecotec Power  -  GM Delta
The J-Body Organization
Log In
 you are here: / home / members
 Friday, March 19, 2010 
REGISTER NOW
HOME REGIONS LIBRARY
MEMBERS FORUMS
CHAT CLASSIFIEDS PREMIUM MEMBERSHIP STORE TEAMS / CLUBS CONTACT US

Michael Rivet

(tunedz)

Location: Winnipeg,MB
Joined: Saturday, August 31, 2002
Last Update: Sunday, March 30, 2008

Email: Import_fighter@hotmail.com
MSN Messenger: Import_fighter@hotmail.com
Yahoo Messenger: import_fighter2002@yahoo.com

ProfileCarsForum
2002 Chevrolet Cavalier Z24

Body Style: Coupe
Color: Silver
Engine: 2.4L DOHC
Transmission: Manual
Interior: graphite

MODIFICATIONS

Engine:
  • RSM Racing .410 lift .220 duration cam shafts
  • Machined cam towers to allow for bigger cams
  • Induction Dynamics LD9 race head
  • 3-Angle valve job
  • Crower Pro-flow stainless steel valves
  • Crower TI-17 titanium retainers
  • Crower dual coil valve springs
  • New pads
  • New seals
  • Head re-surfaced
  • SCE copper head gasket
  • JE custom made 12.5.1 forged pistons with gas ports
  • JE pro seal piston rings
  • JE 52 series wrist pins
  • JE spiro locks
  • Eagle H-beam connecting rods
  • ARP rod bolts
  • ARP main studs
  • ARP head studs
  • ARP flywheel bolts
  • ARP header studs
  • ARP intake manifold studs
  • ARP pressure plate bolts
  • Clevette 77 main bearings
  • Clevette 77 rod bearings
  • block bored and honed over.20
  • O-ringed block
  • grooved head
  • knife edged crank shaft
  • GM 2.3L oil pump
  • GM 2.3L oil pump drive gear
  • GM 2.3L windage tray
  • GM 2.3L oil pick-up assembly
  • GM 2.3L oil pick-up assembly bracket
  • Removed balance shafts
  • Modified oil pan to allow for 2.3L oil pump
  • Balanced crankshaft
  • Balanced and blueprinted motor
  • Induction dynamics custom made intake manifold
  • BBK 80mm throttle body
  • Induction dynamics Custom cold air intake
  • RK sport polished fuel rail
  • RC engineering 310cc injectors
  • Mallory fuel pressure regulator
  • Induction dynamics fuel rail adaptor
  • Holly 255lph fuel pump
  • Aeroquip -8 steel braded hose
  • Aeroquip swivel seal hose ends
  • Earl's aluminum tubing
  • Earl's aluminum tubing adaptors
  • Earl's fuel filter
  • APC breather
  • JMTS header 1 3/4" primaries and 3 inch collector
  • Induction dynamics custom copper header gasket
  • Full 3" mandrel bent exhaust
  • SCE collector flange gaskets
  • Magnaflow muffler
  • Header flange port matched to head
  • RK sport upper engine mount insert
  • RK sport lower engine mounts
  • Prothane transmisson mounts
  • NGK race plugs
  • MSD 8mm spark plug wires
  • MSD spark plug wire separators
  • RK sport 11.lbs aluminum flywheel
  • Balanced flywheel
  • Clutch Masters stage 3 clutch
  • Redline 75-90 manual transmission lubricant
  • Redline water wetter
  • Mantapart A/C eliminator pulley
  • GM 2.3L HO crankshaft pulley
  • Balanced crankshaft pulley
  • FJO racing 341B2 engine management
  • FJO racing wideband AFR
  • FJO racing progressive nitrous controller
  • FJO racing water/methenol system
  • FJO racing low impedance injector driver
  • all FJO racing engine sensors
  • Custom magnetic crank sensor bracket
  • Flex a lite fan
  • Garagebiitz custom surge tank
  • Garagebiitz custom rad made with a spearco intercooler core
  • Nitrous express direct port nitrous system
  • Nitrous express 15lbs bottle
  • Nitrous express 12lbs carbon fiber bottle
  • Nitrous express purge kit
  • Nitrous express gauge
  • Nitrous express fuel pressure safty switch
  • Nitrous express bottle heater
  • Nitrous express blow down tube
  • Nitrous express remote bottle opener
Suspension/Wheels/Brakes:
  • Bogart racing wheels 15x8" (front)
  • Bogart racing wheels 15x3.5" (rear)
  • Mickey thompson ET Drags 24.5x8x15" (front)
  • Mickey thompson ET Fronts 24x4x15" (rear)
  • BFG G-force TA drag radial 225/45/17 (street)
  • Rota SDR's 17x7.5" (steel gray)
  • Bridgestone potenza's 225/45/17
  • Mr. gasket 1/4" wheel spacers
  • Quaife LSD
  • Drive shaft shop stage 5 race axles and hubs
  • ARP wheel studs
  • Tein super street damper coilovers with pillow ball mounts
  • Tein EDFC
  • Eibach camber kit
  • GRD subframe brace
  • GM front strut tower brace
  • RK sport rear strut tower brace
  • RK sport tubular A-arms
  • Inroble sports slotted and drilled rotors
  • EBC brake pads
Interior:
  • Auto meter phantom air/fuel gauge
  • Auto meter phantom exhaust gas temperature gauge
  • Auto meter EGT probe kit
  • Auto meter phantom oil pressure gauge
  • Auto meter auto gauge fuel pressure gauge
  • Auto meter phantom oil temperature gauge
  • Auto meter phantom coolant temperature gauge
  • Auto meter phantom 5" tach with blue shift light
  • Auto meter phantom 3 3/8" speedometer
  • Auto meter phantom 3 3/8" tach
  • Auto meter phantom volt gauge
  • Auto meter phantom fuel level gauge
  • Auto meter phantom fuel pressure gauge
  • Auto meter phantom nitrous pressure gauge
  • Auto meter gauge mounting cups
  • Lo tek triple gauge pod piller
  • B&M short throw shifter
  • MOMO (race) steering wheel
  • MOMO steering wheel hub
  • MOMO (start) seats
  • MOMO 4 point 2" harnesses
  • MOMO harness pads
Exterior:
  • Buddy club carbon fiber hood
  • JSP corbon fiber trunk

[ home | regions | premium membership | members | library | faq ]
[ events calendar | gallery | chat | classifieds | store ]
[ forums | links | teams/clubs | contact us ]

TERMS OF SERVICE   PRIVACY POLICY
© 1999 - 2010 GM Enthusiast Network