-MD- Pulleys, Discusion, Cranks and Alternators-Long Read- - Page 3 - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Friday, December 14, 2007 3:26 AM
Hey, was nobody really listening?! I said: What about a oversized (underdrive) pulley for the power steering pump? Certainly that has to be worth some gains, right?

Go beyond the "bolt-on".

Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Friday, December 14, 2007 9:45 AM
Working on getting a water pump pulley.

Also the GP for LD9 cranks should be up when ever my paypal payment clears. Probably Monday.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, December 18, 2007 8:14 AM
LD9 GP is complete and summited. Keep an eye out.


PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, December 18, 2007 9:22 AM
YAY, that's one more step towards the Eco crank pulley! lol



Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, December 18, 2007 1:05 PM
LD9 Group Purchase!




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Sunday, December 23, 2007 7:04 AM
Any update on L61 pulleys?
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Sunday, December 23, 2007 5:11 PM
Matt wrote:Any update on L61 pulleys?

x2




Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Sunday, December 23, 2007 5:23 PM
x3
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Sunday, December 23, 2007 5:48 PM
x4
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Sunday, December 23, 2007 6:30 PM
x5
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Sunday, December 23, 2007 7:01 PM
The L61 Pulleys will debut after the LD9 Group Purchase...




Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Sunday, December 23, 2007 7:16 PM




Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Monday, December 24, 2007 12:44 AM
Set aside a set for the LN2 for me once you get them made in plain gray. I may not have the money yet but 6-7hp gain seen by way of reduced rotating mass and the fuel mileage gain as well is something well needed with my truck's LN2.

Go beyond the "bolt-on".
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, January 22, 2008 3:25 AM
~~Whats this.................Its a heard of L61 crank pulleys on the horizon....~~


Talks are on, and I hope at least one prototype will be floating around SOON!


~~Keep an eye out.~~



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Wednesday, January 23, 2008 11:38 AM
YEAH!!!!!!!!


Kill list:03 eclipse, 06 GTO, 04 Mach 1 Mustang


Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Wednesday, January 23, 2008 1:46 PM
The l61 are going to be stock size right? Just curious because of the blower belt and tensioner can only take up so much slack and smaller belts are a beeeoch.



Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Wednesday, January 23, 2008 2:30 PM
THANK GOD!!!!!!



Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Wednesday, January 23, 2008 2:45 PM
I've heard that the crank pulley bolt on the L61's have to be replaced with a new one after you remove it, something about being self torquing. Any truth to that?
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Thursday, January 24, 2008 3:47 AM
Cody@RDFABS wrote:The l61 are going to be stock size right? Just curious because of the blower belt and tensioner can only take up so much slack and smaller belts are a beeeoch.

Stock O.D.
darestie wrote:I've heard that the crank pulley bolt on the L61's have to be replaced with a new one after you remove it, something about being self torquing. Any truth to that?

Not that I know of, but I make sure.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Thursday, January 24, 2008 5:31 AM
Sweet, I better put some money aside!!!



Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Thursday, January 24, 2008 9:28 AM
just in time for tax return season, sweet

Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Saturday, January 26, 2008 8:43 AM
I might be interested if I had a comparison of the RK crank pulley I'm using vs the pulley you're selling.
I'm also using the AEM pulley too for the alternator and if there was a comparison here too, would get in on this if the pulley's you're selling are lighter in weight.

Either way, when you from the oem stock pulleys to a lighter pulley, you'll feel the difference in all rpm's.
A good purchase people.



Misnblu.com
Newbie member since 1999
Thank you Dave and JBO!





Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Monday, January 28, 2008 5:28 AM
Misnblu Ask Mastin. He did a comparison of all avalible crank pulleys for the LD9.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Monday, January 28, 2008 5:02 PM
Thanks man, I'll most certainly do that.



Misnblu.com
Newbie member since 1999
Thank you Dave and JBO!





Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, January 29, 2008 4:47 AM
Watch for the L61 and LE5 Crank pulley GP coming in February. Yes this year.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search