-MD- Pulleys, Discusion, Cranks and Alternators-Long Read- - Page 7 - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Monday, June 14, 2010 4:10 PM
looks like you soaked it in blood.



180hp in 1989 or 145hp in 2002, you decide. >

Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Monday, June 14, 2010 4:11 PM
Kandy Red



Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Monday, June 14, 2010 4:14 PM




180hp in 1989 or 145hp in 2002, you decide. >
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, June 15, 2010 6:55 PM
z yaaaa wrote:lol ive got two aem pullies. IMO mike, yours is a bit lighter, yes. it has to be, they are both billet aluminum, and the AEM is at least twice the size.

id just like to figure out how much it actually helps thats all. maybe it'd be easier to just pop the serp belt off at the track and charge between rounds if it saves some hp. james, i believe its just the automatic cars that have charging issues at idle with the aem. mine had the same issues, i finally just said screw it and took the AEM off. but im saving it for my other project...

pics for size comparison...










Unless you're planning on a high-winding racer, or getting a starter-melting alternator, I wouldn't even bother saving the AEM piece.


Go beyond the "bolt-on".
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, June 15, 2010 6:57 PM
high winding streetable racer is correct.



180hp in 1989 or 145hp in 2002, you decide. >
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Wednesday, September 01, 2010 6:54 AM
I want to thank everyone that has purchased pulley(s) from me over the years.

I have sold more than 250 pulleys!

Thank you all.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Wednesday, September 01, 2010 8:52 AM
Mike you and I need to get together and design a good pulley for our external crank triggers



LE61T PTE6262 Powered

Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Wednesday, September 01, 2010 3:43 PM
-MD- Enforcer wrote:I want to thank everyone that has purchased pulley(s) from me over the years.

I have sold more than 250 pulleys!

Thank you all.


Congratulations Mike

Keep up the good work





Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Thursday, September 02, 2010 2:22 AM
IamQwibby (Eco Meatcake) wrote:Mike you and I need to get together and design a good pulley for our external crank triggers

Y'know, I was just thinking that.... (Integrated crank-trigger/pulley)


Go beyond the "bolt-on".
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Thursday, September 02, 2010 4:50 AM
-MD- Enforcer wrote:I want to thank everyone that has purchased pulley(s) from me over the years.

I have sold more than 250 pulleys!

Thank you all.

congrats



Sig thanks to bxmobkrazey on gmscf.com
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Thursday, September 02, 2010 8:56 PM
IamQwibby (Eco Meatcake) wrote:Mike you and I need to get together and design a good pulley for our external crank triggers


YES YOU DO!

Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Monday, October 04, 2010 12:13 PM
LN2 or L61 crank pulleys next.....decisions decisions....

I may finally have time to finish this. lol







Edited 1 time(s). Last edited Monday, October 04, 2010 12:56 PM

PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Monday, October 04, 2010 12:25 PM
L61 crank pulley 6 rib, alternator pulley 6 rib

Oh did I say that rather loudly?
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Monday, October 04, 2010 3:33 PM
Im looking for a crank pulley for my 2200...
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Monday, October 04, 2010 4:36 PM
LN2... One of each, please!


Go beyond the "bolt-on".
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, December 07, 2010 10:39 AM
Why am I no longer subscribed to this!



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, December 07, 2010 11:20 AM
LN2 here.



Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, December 07, 2010 12:58 PM
Mike PLEASE get in touch with me!!!


Trigger Wheel ideas...



LE61T PTE6262 Powered

Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, December 07, 2010 1:03 PM
Phil you can call me as well.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Tuesday, December 07, 2010 3:38 PM
true, call me now if you're free



LE61T PTE6262 Powered

Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Wednesday, December 08, 2010 3:42 AM
I was free, but I didn't know to call you. I can talk to you after 6 tonight if you like.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Wednesday, December 08, 2010 4:32 AM
I vote L61 crank pulleys next Mike.



Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Wednesday, December 08, 2010 9:12 AM
ok that works, call me then



LE61T PTE6262 Powered

Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Wednesday, December 08, 2010 11:49 AM
I vote HO pullies next! lol



Re: -MD- Pulleys, Discusion, Cranks and Alternators-Long Read-
Monday, October 24, 2011 11:46 AM
LN2 2.2-2200 Alt & Crank please



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search