LN2/2200 and 1.8/2.0 compatibility questions - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
LN2/2200 and 1.8/2.0 compatibility questions
Thursday, March 19, 2009 12:06 PM
I was wondering if anyone had any specs on the 1.8ohv and 2.0ohv engines that came before the LN2/2200. Basically I want to see if we can mix and match parts to create a better engine. Specifically I'm looking for stroke/bore, piston, crackshaft, conn rods, head compatibility, compression ratios, ect. It would be awesome if we could stroke or de-stroke the 2200 using a mixture of pistons, rods, and the crankshaft from previous models. Thank you for any and all info.




Re: LN2/2200 and 1.8/2.0 compatibility questions
Thursday, March 19, 2009 12:12 PM
You're not going to be able to stroke, but the 1.8L double-roller timing set is nice




fortune cookie say: better a delay than a disaster
Re: LN2/2200 and 1.8/2.0 compatibility questions
Thursday, March 19, 2009 12:17 PM
werent the 1.8L and 2.0L mitsubishi motors?


1997 Cavalier Z24
Bomz Short Ram Intake
Vibrant Cat-Back
KYB GR2 Struts
Goldline 1.75" Springs
RK Sport Upper Insert
RK Sport Lower Dogbone
Custom Tune by Shane @
innovativetuning@rogers.com

15.647 @ 88.02 MPH
Re: LN2/2200 and 1.8/2.0 compatibility questions
Thursday, March 19, 2009 12:18 PM
i saw that when i searched for a hybrid ohv. imma go read up on it



Re: LN2/2200 and 1.8/2.0 compatibility questions
Thursday, March 19, 2009 1:52 PM
whitegoose wrote:

werent the 1.8L and 2.0L mitsubishi motors?
http://www.s10forum.com/forum/f105/2-2-growing-pains-321784/
Always GM.




fortune cookie say: better a delay than a disaster
Re: LN2/2200 and 1.8/2.0 compatibility questions
Friday, March 20, 2009 1:33 PM
Hey, Notec... That link you posted don't work! Could you fix it, please?


Go beyond the "bolt-on".
Re: LN2/2200 and 1.8/2.0 compatibility questions
Friday, March 20, 2009 4:01 PM
Copy & paste, it will work.





Re: LN2/2200 and 1.8/2.0 compatibility questions
Saturday, March 21, 2009 6:33 PM
the distributor from the old 1.8/2.0 drops intot he block but hits the intake
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search