I highly doubt anyone here remembers me, but 20 years ago I was one of the owners of FDP Performance.
I was cleaning up around the shop and found this prototype 65mm throttle body for the 2.4L Z24 engine used from 1996 to 2002 I think.
Itís not perfect but should be functional now.
I had to add a bolt to the side as a stopper so it doesnít over rotate.
We didnít sell many of these and from what I recall this was the max you could port out the stock intake manifold.
Plus I remember these engines being finicky so I used to test every throttle body before shipping it.
I havenít tested this one since assembling it last week and no longer have access to a car to try it on.
Iím selling this AS IS with no warranty for $150 Canadian plus shipping.
If youíre interested send me a message at firstname.lastname@example.org
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
This isnít a RSM unit.
These were custom built for me from billet aluminum.
This one was an early unit that wasnít made quite right.