Coilover Bearing Source - Page 2 - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Coilover Bearing Source
Friday, March 25, 2005 4:16 PM
Joe Schulte wrote:Wow, can someone go to the site and get me all the specs I need, there is a ton of them . Confusing! Also why not get the ones that are sealed on both sides? Won't be able to lube them I assume?


This thread has all the specs in it.

As for the sealed ones... I don't think they come in the right size. Not positive on that though.






Re: Coilover Bearing Source
Friday, March 25, 2005 7:51 PM
I found them with the .875"? or whatever it was.





Re: Coilover Bearing Source
Saturday, March 26, 2005 11:58 AM
Would any of guys have the part number for the bearings. Im having a hard time finding the ones i need. Thank you

~*Gilles*~



Re: Coilover Bearing Source
Saturday, March 26, 2005 2:47 PM
Bearings (You need 2)

Description: NTA-1423, UNSEALED, THRUST BEARING
MFG Part #: NTA 1423 BRG
Manufacturer: TORRINGTON BEARING CO.

SHAFT DIAMETER (BORE): .8750 IN.
OUTSIDE DIAMETER: 1.4375 IN.
WIDTH: .0781 IN.
CLOSURE TYPE: UNSEALED
TYPE OF NEEDLE BEARING : THRUST BEARING

Washers (You need 4)

Description: TRC-1423, UNSEALED, THRUST WASHER
MFG Part #: TRC 1423 THRUST RACE
Manufacturer: TORRINGTON BEARING CO.

SHAFT DIAMETER (BORE): .8750 IN.
OUTSIDE DIAMETER: 1.4375 IN.
WIDTH: .0920 IN.
CLOSURE TYPE: UNSEALED
TYPE OF NEEDLE BEARING : THRUST WASHER





Re: Coilover Bearing Source
Saturday, March 26, 2005 6:00 PM
wow sticky this!

at this price, i can replace my bearings after every winter! the sand really eats them up good and its just wayyy too cold to do any work or cleaning under there in the winter.



Vice President - NEJBody
2007 Cobalt SS
2001 Sunfire (retired)
Re: Coilover Bearing Source
Tuesday, March 29, 2005 9:42 AM
Thank you so much Wild Weasel. Your always such good help buddy. What would i do with out you Can't wait to meet u at the j-body bash in Ontario. Ill bring the ladies hehe


~*Gilles*~



Re: Coilover Bearing Source
Tuesday, March 29, 2005 10:26 AM
Well I don't think my wife is going to appreciate that but what the hell... everyone loves eye candy.






Re: Coilover Bearing Source
Friday, April 01, 2005 12:28 PM
LOL oh thats ok. So i called this place and tried to make and order but then came to realize that the bearing i need is the exact same dimensions has the washer's so really it wasn't to good for me. Just wondering if you would have the part number for the needle roller bearings. Thanks


~*Gilles*~





Re: Coilover Bearing Source
Friday, April 01, 2005 4:44 PM
Whoa... I've just realized that both of those part numbers above are for the races (washers). Weird.

Sorry guys... this the bearing.

Description: NTA-1423, UNSEALED, THRUST BEARING
MFG Part #: NTA 1423 BRG
Manufacturer: TORRINGTON BEARING CO.

SHAFT DIAMETER (BORE): .8750 IN.
OUTSIDE DIAMETER: 1.4375 IN.
WIDTH: .0781 IN.
CLOSURE TYPE: UNSEALED
TYPE OF NEEDLE BEARING : THRUST BEARING


I'll go update the post above.




Re: Coilover Bearing Source
Friday, April 01, 2005 6:14 PM
And i thought you were smart LOL u know im kidding. Thanks alot Weasel for the update i really appreciate it bro. Awesome......



~*Gilles*~



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search