I love jack stands! - Page 7 - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: I used to love jack stands!
Monday, July 30, 2012 7:11 AM
225/50r16's are undersized as well, which is what makes them awesome, haha.



Paying someone to install parts and bragging about it being fast, is like watching someone bang your wife and being proud to raise their kids.

Re: I used to love jack stands!
Monday, July 30, 2012 7:46 AM
225/50/r16s and 205/55/r16s are almost the exact same size.

205/55/r16 has a tire diameter of 631.9 mm.
255/50/r16 has a tire diameter of 631.4 mm.

Tire wear has more variation in size than 0.016" difference.

205/55 are lighter than the 225/50 though.....








Edited 1 time(s). Last edited Monday, July 30, 2012 7:47 AM

PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Monday, July 30, 2012 9:18 AM
Man they aren't much smaller on paper are they...

Side by side with my 205-55r16's they were noticeably shorter, but that might have been the all season vs Falken Azenis tread.



Paying someone to install parts and bragging about it being fast, is like watching someone bang your wife and being proud to raise their kids.
Re: I used to love jack stands!
Thursday, August 02, 2012 3:24 AM
So trans is slipping like a mother @!#$ going into third........ Fluid is well not pretty. So I guess I need a trans cooler, and change my fluid before I head back to the track.

Hopefully it is just the fluid, and third didn't take a crap. It does have 125,000 on it....

Yep, lost by a red light with -0.0005 under last night. FML



Edited 1 time(s). Last edited Thursday, August 02, 2012 3:40 AM

PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Thursday, August 02, 2012 8:41 AM
haha g'damn red lights.



I choose the technology built for land speed records... not the technology built to save on emissions and gas mileage.
Re: I used to love jack stands!
Monday, August 06, 2012 11:49 PM
Holy cow... 16 sec 1/4 in a z. I didn't think they were that slow stock.


"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"

Re: I used to love jack stands!
Tuesday, August 07, 2012 3:57 AM
DSMskyline wrote:Holy cow... 16 sec 1/4 in a z. I didn't think they were that slow stock.

Stock auto is 16.4. My best is 15.4. These runs are with the trans not shifting into third...It made baby Jesus cry. buahahah

I should be having the trans fluid changed later this month and a bigger external trans cooler put on. Hope to be in the low 15s again. Car feels great in 1st and 2nd gear.






PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Tuesday, August 07, 2012 7:34 AM
lol stock auto might run 16.4 at sea level. mine has nearly as much power as yours and feels like a 17 second car to me...



I choose the technology built for land speed records... not the technology built to save on emissions and gas mileage.
Re: I used to love jack stands!
Tuesday, August 07, 2012 10:44 AM
The trans cooler I should be picking up is a "TCI Auto P/N 823200 - TCI Performance Transmission Cooler."

Just need to figure out my lines. Either modify my new stock replacement lines or just go full SS braided. Thoughts?







PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Monday, August 20, 2012 3:54 AM
The LG0 got a lot more love this weekend...





086 head hard to see




And the reason I'm getting very little done lately. Been working on finishing the dads Model T Hotrod.
Yesterday was it first start up....you can not tell from the dads lack of any emotion. lol






PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Monday, September 24, 2012 4:07 AM
Finally swapped to my none cracked dash!






Also, installed my auto under dash panel and removed my manual cover.





PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Re: I used to love jack stands!
Monday, September 24, 2012 5:04 AM
Looking good Mike, I gottta say no wonder these panels crack, thats one big chunk of plastic attached to almost every prone to vibration part of the dash.



Re: I used to love jack stands!
Monday, September 24, 2012 5:30 AM
Also, had the transmission completely flushed. It is shifting like a champ again. Drove it around most of yesterday in stop and go, freeway, and back roads. Not one hiccup at all. Trans temp never got above 200 degree F. 160-180 normally=perfect.

I also walked through / tuned Brad's "zYaaaa" trans settings. Seems to be working out great for him as well.









PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Monday, September 24, 2012 7:03 AM
NY dash FTW!



Paying someone to install parts and bragging about it being fast, is like watching someone bang your wife and being proud to raise their kids.
Re: I used to love jack stands!
Monday, September 24, 2012 8:35 AM
Tim, agreed man.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Monday, September 24, 2012 9:25 AM
I've gotta swap the red car's dash into my green car, the green car's is all cracked, because it's from SC, haha.



Paying someone to install parts and bragging about it being fast, is like watching someone bang your wife and being proud to raise their kids.
Re: I used to love jack stands!
Monday, October 15, 2012 7:03 AM
Why would I want this...number 4, 5, and 6 to be exact....LG0 Swap with no more stupid cooling tank...

GM p/n 10344426 = 4
GM p/n 15042975 = 6
GM p/n 15063597 = 5...maybe

Maybe 11 hidden in the fender......or under something under window cowling...
GM P/N 15940309


I have a lot of evil thoughts after seeing all the crazy WV"ness" at the Fatman's cruise.








PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Monday, October 15, 2012 7:51 AM
^^ I like that idea

So number 11 is the hiddin overflow? And i never saw this setup on any eco motor, hmm










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: I used to love jack stands!
Monday, October 15, 2012 8:20 AM
Im digging the Quad 4 love.

Whats up with that bracket near the alternator?

IIRC that bracket is a BITCH! Not too sure but I dont think my GTZ has that bracket. I know the LG0 I pulled from the JY did have it....and it sucks to remove.


GMR has got nothing on this
Re: I used to love jack stands!
Monday, October 15, 2012 8:49 AM
WHITECAVY wrote:^^ I like that idea

So number 11 is the hidden overflow? And i never saw this setup on any eco motor, hmm

Yes, exactly...and this is how HHR's are done.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Monday, October 15, 2012 10:07 AM
-MD- Enforcer wrote:Why would I want this...number 4, 5, and 6 to be exact....LG0 Swap with no more stupid cooling tank...

GM p/n 10344426 = 4
GM p/n 15042975 = 6
GM p/n 15063597 = 5...maybe

Maybe 11 hidden in the fender......or under something under window cowling...
GM P/N 15940309


I have a lot of evil thoughts after seeing all the crazy WV"ness" at the Fatman's cruise.


I would be interested in something like that



Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren

Re: I used to love jack stands!
Monday, October 15, 2012 10:11 AM
15940309 is listed as radiator tank HARDWARE, listed as 38.52 on gmpartsdirect. Whats the part# for the actual tank?










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: I used to love jack stands!
Monday, October 15, 2012 10:39 AM
TANK. Engine Coolant Recovery
TANK,COOL EXPN. Required: 01
For: A (2006-2011) (2006 - 2007). $49.09
P/N: 15940309

In the few others places I looked it up it is correct.
http://www.crateenginedepot.com/TANK-ASM-COOL-RCVY-EXPN-15940309-P37503.aspx

On ebay.
http://www.ebay.com/itm/New-O-E-M-Coolant-Reservoir-06-11-Chevy-HHR-15940309-/251131249086





PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: I used to love jack stands!
Wednesday, October 17, 2012 8:08 AM
Do you have a pic of this tank setup in a HHR??




Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: I used to love jack stands!
Thursday, October 18, 2012 4:41 AM
I can get one!

Also, I posted this on the ol facebook a while ago, but not here. Just encase I want to run an external crank trigger.






PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search