Post Ur Stanced OUT J-Bodies! - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Post Ur Stanced OUT J-Bodies!
Friday, October 11, 2013 4:19 AM
Okay Post a few pics of you slammed and stanced out J body and post your setup to included suspension and wheel specs.
drop:
spring:
spacers:
wheel:
offset:



Image


GOT ECOTEC?

Re: Post Ur Stanced OUT J-Bodies!
Friday, October 11, 2013 6:08 AM
Sure! Why not.

Drop: Tein basics with aluminum top mounts at all 4 corners.
Spring: Stock Tein basic front, 2" shorter rear spring.
Spacers: Front 10mm, Rear 15mm.
Wheel/Tire: Drag DR-31 in 17x9" with 215/45 Falken.
Offset: 28mm on wheels alone before spacing.


Untitled by qwik2k2z24, on Flickr





BeardLife / Club Awesome Reject Blog
Re: Post Ur Stanced OUT J-Bodies!
Sunday, October 13, 2013 11:44 AM
^^..Effin love it bro!! Really luv this Cavy an can't wait till she's back up an running strong! Great job bro..
Re: Post Ur Stanced OUT J-Bodies!
Sunday, October 13, 2013 2:00 PM
heads up man!! someones trying to steal your car!!! lol


04 Cav. 2dr. 5spd. My DD. 'Nuff said.
Re: Post Ur Stanced OUT J-Bodies!
Thursday, October 17, 2013 1:01 PM
^^..Hahaha..
Re: Post Ur Stanced OUT J-Bodies!
Thursday, October 17, 2013 6:51 PM
That's his car.





Re: Post Ur Stanced OUT J-Bodies!
Friday, October 18, 2013 3:13 PM
Joe Schulte wrote:That's his car.


......


04 Cav. 2dr. 5spd. My DD. 'Nuff said.
Re: Post Ur Stanced OUT J-Bodies!
Friday, October 18, 2013 6:07 PM
LMFAO

That is all..



"In Oldskool we trust"
Re: Post Ur Stanced OUT J-Bodies!
Friday, October 18, 2013 8:37 PM
Drop: Tein SS coil-overs
Spring: Stock Teins
Spacers: 1/2" hub spacers in the rear, none up front.
Wheel/Tire: 5Zigen ProRacer GN+ 18x7.5, 225/40s
Offset: 35mm




Go ahead and argue if it is "stanced", but to me it is close to the perfect stance. It could use another 1/4" in the rear. But wider track than stock, zero stretch, and just a smidge of wheel gap.






Re: Post Ur Stanced OUT J-Bodies!
Friday, October 18, 2013 11:49 PM
I'm prepared for the hate...don't use my lowering method. You may die...and it's bouncy...coilovers to come
Drop: stock struts with cut springs
Spring: Megan lowering spring with a coil and a half chopped off
Spacers: none
Wheel/Tire: TSW Snetterton 17x8 235/45 (going to get 215/45)
Offset: unknown but I'm guessing close to 25ish


Re: Post Ur Stanced OUT J-Bodies!
Saturday, October 19, 2013 6:55 AM
I almost died looking at it , looks great man, like the gold.

Re: Post Ur Stanced OUT J-Bodies!
Saturday, October 19, 2013 9:05 AM
looking good guys!!
heres mine..


drop: KYB AGX Adjustables
spring: Eibach sportlines
spacers: .75 ( 3/4) inch) rear Hub Spacers
wheel: XXR 527 17x9.75 on 215/45/17 KUMHO ECSTA AST strech hoe.
offset: 25mm






Image


GOT ECOTEC?
Re: Post Ur Stanced OUT J-Bodies!
Saturday, October 19, 2013 9:51 AM
Well I don't believe my shorts getting tight was due to just waking up. that looks @!#$ sexy! I love the stretch you have! If it wasn't close to putting winter rims on I'd buy some tires and get some stretch going
Re: Post Ur Stanced OUT J-Bodies!
Monday, October 21, 2013 12:00 PM
Z24Sunfire wrote:Well I don't believe my shorts getting tight was due to just waking up. that looks @!#$ sexy! I love the stretch you have! If it wasn't close to putting winter rims on I'd buy some tires and get some stretch going


Yours looks on point.

215/45 looks goofy as hell on a 9.75".... I feel that rim should be an 18" with less profile to establish that amount of stretching.. or at least be super super low.

I personally stayed 45 series for added comfort but I didn't do an extreme stretch.

But whatever floats your boats! Like Tinkles hinted.. We all have a personal "perfect stance"..





BeardLife / Club Awesome Reject Blog
Re: Post Ur Stanced OUT J-Bodies!
Tuesday, October 22, 2013 2:10 AM
I need a little bit cause the 235/45 is extremely high profile and I no longer have any inner fenders.
That's the nice thing about cars we can make them to our tastes
Re: Post Ur Stanced OUT J-Bodies!
Wednesday, October 23, 2013 3:16 AM
Qwik2k2z24 wrote:
Z24Sunfire wrote:Well I don't believe my shorts getting tight was due to just waking up. that looks @!#$ sexy! I love the stretch you have! If it wasn't close to putting winter rims on I'd buy some tires and get some stretch going


Yours looks on point.

215/45 looks goofy as hell on a 9.75".... I feel that rim should be an 18" with less profile to establish that amount of stretching.. or at least be super super low.

I personally stayed 45 series for added comfort but I didn't do an extreme stretch.

But whatever floats your boats! Like Tinkles hinted.. We all have a personal "perfect stance"..

Are you referring to me saying mine looks goofy as hell?
Personally I used these tires because of ride comfort and also I had these as spares laying around.
But Im planning on BC coilovers in the fitter with lower sidewall, also the roads over here in Italy are bad!!


Image


GOT ECOTEC?
Re: Post Ur Stanced OUT J-Bodies!
Wednesday, October 23, 2013 7:58 AM




Alero IRS with custom strut housings front and rear, N-body spindles. 5x115.
Enkei Aegis, 17x10 +25 and 17x10.5 +19
215/35 and 215/40.





Re: Post Ur Stanced OUT J-Bodies!
Wednesday, October 23, 2013 10:22 AM
Not entirely "stanced out".... but she looks nice

drop: STD Coilovers
spring: STD Coilovers
spacers: (I have 1/2" rear hub spacers that are waiting to go on)
wheel: 17x7.5 Focal F05
offset: 42mm
tire: 215/45






Re: Post Ur Stanced OUT J-Bodies!
Thursday, October 24, 2013 3:25 AM
Damn you Jeff, you must finish that beauty soon! I wanna see rhd stanced sexiness updates
Re: Post Ur Stanced OUT J-Bodies!
Sunday, October 27, 2013 7:25 AM
Z24Sunfire wrote:Damn you Jeff, you must finish that beauty soon! I wanna see rhd stanced sexiness updates

agreed!!

anybody else doing this?



Image


GOT ECOTEC?
Re: Post Ur Stanced OUT J-Bodies!
Sunday, September 28, 2014 2:38 PM
Z24Sunfire wrote:I'm prepared for the hate...don't use my lowering method. You may die...and it's bouncy...coilovers to come
Drop: stock struts with cut springs
Spring: Megan lowering spring with a coil and a half chopped off
Spacers: none
Wheel/Tire: TSW Snetterton 17x8 235/45 (going to get 215/45)
Offset: unknown but I'm guessing close to 25ish



To z24 sunfire ,DUDE ROLL THOSE FENDERS ,your rear tires must be bitch slappin your wheel wells like a mofo at every bump on the road!


BLACKMANTIS

Re: Post Ur Stanced OUT J-Bodies!
Sunday, September 28, 2014 2:40 PM
Now take out a bat and roll those mothers!


BLACKMANTIS
Re: Post Ur Stanced OUT J-Bodies!
Monday, September 29, 2014 5:38 AM
BLACK MANTIS wrote:Now take out a bat and roll those mothers!

haha I don't even have that @!#$box anymore. I did end up rolling them with a bat shortly after the pic. That was right after I put them on
Re: Post Ur Stanced OUT J-Bodies!
Monday, September 29, 2014 12:53 PM
here is a recent pic, that shows how she sits,



thats all folks for now


Image


GOT ECOTEC?
Re: Post Ur Stanced OUT J-Bodies!
Monday, September 29, 2014 4:15 PM
Drop: Tein basics with aluminum top mounts at all 4 corners.
Spring: Stock Tein basic front, 2" shorter rear spring.
Spacers: Front 5mm, Rear 10mm.
Wheel/Tire: Klutch SL14 18x9.5 with 225/40 Yokohama YK580
Offset: 30mm on wheels alone before spacing.



20140929_182510 by qwik2k2z24, on Flickr





BeardLife / Club Awesome Reject Blog
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search