Quote:
i have the saab injecotrs on an 04 rail..you just need the lil spacers for the injectors
the part number is listed on the first page along with the connectors.
i looked on the 1st page. i cant find the part number for the saab injectors or the lil spacers. maybe im just a dumbass and missed it snowman?
ordered the sensor and connector
65.06-sensor
102.30-connector
i just need the injectors, spacers and the reflash
is the tmap the same thing as mentioned on the first page just those 2 gm part #s
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
well I am considering looking for new injectors.
these 370cc saab's are running way too rich.
I might try using an aftermarket fpr such as the aeromotive a1000
"Growing old is mandatory. Growing up? Definitely optional."
im using the gm supercharger 310s off the 2.4 kit which are delphi style with an 03 fuel rail they are running really good off stock fuel pressure and no fmu at 7psi with an fmu and fpr on might be able to tune them a bit better for slightly higher boost prob not more than 8-9psi and then they wont be able to keep up, dont know of any 330cc injects other than rc that might work better thats kinda in the middle
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
i dont know the part number for the injectors i got them off a blown motor @ work.
as for the spacers if you have an 03 you should have hte spacers already. but i recall it might be cheaper to try and get the injecotrs out of the supercharger kit.
*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**
Quote:
well I am considering looking for new injectors.
these 370cc saab's are running way too rich.
well when your done considering, shoot me a pm or get me on msn cuz i will buy them from you.
Quote:
as for the spacers if you have an 03 you should have hte spacers already. but i recall it might be cheaper to try and get the injecotrs out of the supercharger kit.
i have a 2004 but im running 320cc injectors from the hahn kit. i had to solder in new injector clips for them to fit.
btw, what would happen without the spacers?
well just use the injectors from the hahn kit
*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**
but the calitbration is for a 370 , not a 320. its too small of an injector. and its a rc
what about the spacer thing. mine is an 04.
what woudl happen without them
the 03-05 motors have the spacers
02 doesnt
oh sweet, so the 370s would fit right in my rail?
i dotn suppose you know the part numbers do u eric?
LAST I HEARD.........FROM ERIC..............IS THAT THE SAAB ONES WERE DISCONTINUED.
*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**
part numbers for the injectors in the gm charger kit?
the saab one's were discontinued.
I know this because a friend who works where they make them said they are no longer being made.
"Growing old is mandatory. Growing up? Definitely optional."
Quote:
THE SAAB ONES WERE DISCONTINUED
*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**
hmm well ill call gm toamrrow. this is the only thing i found in the SC kit
Injector Assembly – Fuel 12593904
well i just got off the phone
Injector Assembly – Fuel 12593904 its $77 per injector.
so the final list is
sensor-----------------90423637--------65.06
connector-------------88988320-------102.30
Injector Assembly -12593904----------77 each
just gotta get the reflash number
little bit of clarity:
the saab injectors are not being made here in the us anymore. they are being made at our sister plant in pisa italy. they are a first gen style injector (D1, d for deka) and we only make D4, D5, and D7 for right now. I do happen to know someone with 2 brand new sets left
I doubt they would stop making those injectors.
I mean, how are we going to replace the injectors I break?
Oh, and paco, let me know whos got those injectors.
teh Sunfires... (Tom) wrote:I doubt they would stop making those injectors.
I mean, how are we going to replace the injectors I break?
well not necesarily stop making them, maybe stop production on them. this would mean that they would not be mass produced. they would be produced as a "service build". this is when you go to a dealership and order a part and they tell you that its 3-7 weeks before they'll get them in. this is because they are usually not made fully automated and it takes longer to make. the manufacturer gets the order in and they make them accordingly with their other many orders (sort of like waiting your turn at the dmv).
as for
teh Sunfires... (Tom) wrote:Oh, and paco, let me know whos got those injectors.
pm me if you're serious about buying a set.
Paco loco just hooked me up with a set of Saab green top injectors...Can't wait to get it on!!
Thanks PACO LACO