Colin B

colin


Location: Winnipeg Manitoba Canada.
Joined: Saturday, July 21, 2001
Last Update: Sunday, September 25, 2005

Email: v6performance@hotmail.com
Web Page: http://www.domesticcrew.com/660

1992 Pontiac Sunbird GT

About This Vehicle:

like the saying goes "don't judge a book by its cover." 
i tryed to build a nice all around sleeper.
finally its done the first ever hybrid in a jbody(may 19th 2002), 
the engine has been successfully converted to the gen III heads 
and 3400/3100 sfi intakes. 
who says gm doesnt make good performance parts, 
with the exception of the cam and rockers all parts on the engine
are stock type off the shelf gm parts, you just have to know where to look.......
 
new pics added again (july13/02)

thank you dave(jbo) for awarding me with car of the month for June 2002

sorry pics are 2-3 years old now. i just havnt gotten around to updating them.
you can see some pics of it here: http://www.domesticcrew.com/colin/

Body Style: Coupe
Color: Black
Engine: 3.1L V6 MPFI
Transmission: Manual
Interior: dark grey
Purchased From: steve
Build Date: 12/91

 02:16 PM - 13/Jun/04 - gimli (9.757@75.375)
Quarter Mile Timeslips:
 02:21 PM - 22/Jun/02 - viking int'l raceway (14.842@89.782)
 02:27 PM - 22/Jun/02 - viking int'l raceway (14.740@)
 02:34 PM - 22/Jun/02 - viking int'l raceway (14.821@88.634)
 02:38 PM - 22/Jun/02 - viking int'l raceway (14.939@86.772)
 03:15 PM - 22/Jun/02 - viking int'l raceway (14.976@92.183)
 03:19 PM - 22/Jun/02 - viking int'l raceway (15.034@91.219)
 03:34 PM - 22/Jun/02 - viking int'l raceway (14.815@89.162)
 01:44 PM - 03/Aug/02 - viking int'l raceway (14.897@92.251)
 01:55 PM - 03/Aug/02 - viking int'l raceway (14.912@92.442)
 03:15 PM - 03/Aug/02 - viking int'l raceway (14.652@93.332)
 03:28 PM - 03/Aug/02 - viking int'l raceway (14.793@93.029)
 04:03 PM - 03/Aug/02 - viking int'l raceway (14.643@93.566)
 11:54 AM - 17/May/03 - viking int'l raceway (15.051@92.523)
 02:56 PM - 17/May/03 - viking int'l raceway (14.835@91.456)
 03:30 PM - 17/May/03 - viking int'l raceway (15.831@82.511)
 04:23 PM - 17/May/03 - viking int'l raceway (14.896@91.454)
 12:00 PM - 27/Sep/03 - Viking Int Raceway (14.59@94.497)
 12:00 PM - 27/Sep/03 - lost my 4th gear. was going to be a good run (Lost 4th@)
 12:33 PM - 13/Jun/04 - gimli (14.623@96.266)
 01:17 PM - 13/Jun/04 - gimli (14.512@96.465)
 01:59 PM - 13/Jun/04 - gimli (14.548@96.488)
 02:35 PM - 13/Jun/04 - gimli (14.802@91.821)
 02:49 PM - 13/Jun/04 - gimli (14.391@96.479)
 02:56 PM - 13/Jun/04 - gimli (14.694@95.572)
 03:09 PM - 13/Jun/04 - gimli (14.580@96.557)
 03:13 PM - 13/Jun/04 - gimli (14.517@96.258)
 03:38 PM - 13/Jun/04 - gimli (14.456@95.729)
 03:51 PM - 13/Jun/04 - gimli (14.486@95.912)
 01:00 PM - 26/Sep/04 - Saskatoon International Raceway (14.16@95.21)
 03:35 PM - 26/Sep/04 - Saskatoon International Raceway (14.01@95.31)
 04:30 PM - 26/Sep/04 - Saskatoon International Raceway (13.99@96.2)
 02:27 PM - 22/Jun/02 - viking int'l raceway (14.720@89.582)


MODIFICATIONS

Engine:
  • NEED INFO ON HOW TO BUILD A HYBRID? CLICK HERE
  • Engine was completely rebuilt in sept. of 2000
  • block bored 0.030 over (3.2L)
  • Competition Cams camshaft 260 adv.degree's int./exh. 212 deg@.050 int/exh .440 lift.int/exh
  • Comp Cams magnum roller tip rocker arms 1.6:1 ratio
  • .469 total valve lift (1.6:1)
  • Comp Cams hydraulic lifters.
  • Valve Springs '00 5.7L LS1
  • Valve spring retainers and locks '00 5.7L LS1 Valve spring shim's '00 5.7L LS1 '96 gen III 3100 heads- ported and polished
  • heads milled 10.4:1 compression
  • 0.040 thick Iron Head 2.8L head gaskets
  • '00 3100 lower intake -ported/gasket matched
  • '02 3400 upper plenum -ported/gasket matched
  • egr port on upper plenum removed and welded in
  • upper plenum and valve covers hand polished by owner
  • '96 3100 fuel rail -fuel lines adapted to stock hose connections
  • '93 LT1 Fbody 22# Injectors
  • Caspers Electronics adjustable fuel pressure regulator -(3400 style)
  • Autometer 2.5/8th pro comp fuel gauge with Earls steel braided fuel line
  • Custom Made Crankshaft Scraper made by Colin Bulloch
  • Adapted and modified GEN3 Windage Tray
  • Custom Fabricated 36.5inch Long tube equal length Headers built by Colin Bulloch
  • custom made 2.5 inch mandrel bent exhaust
  • Flowmaster 40 series Deltaflow muffler
  • Gibson Exhaust 'sport truck' tips. 2.75x6 slash cut rectangular tips
  • 2.3L QUAD4 56mm throttle body. - Overbored to 64mm. throttle body adapted to plenum using a custom made adapter plate
  • custom made cold air intake 3inch Hooker mandrel bent J bends
  • wrapped intake tube with DEI exhaust wrap to keep air intake piping cooler
  • K&N cone filter
  • Flexalite 12inch Puller fan
  • Permacool 8inch Puller fan
  • Mark Pain Motorsports lower transmission Dog Bone mount
  • MSD8.5MM Super Conductor Custom lenth 6cyl wire set
  • MSD DIS-4 Ignition Module
  • coil packs relocated to top of engine
  • Holley Commander 950 ECU Fully Programable Engine Management
  • Stock MPFI harness repinned for Commander 950
  • bottom half of engine 3.1L mpfi
  • top half of engine has been converted to full 3X00 sfi engine parts
  • the topend hybrid swap was pieced together from core engine and used parts
  • engine still runs on the 3.1L mpfi computer
  • sourced various parts:
  • vacuum lines. coolant hoses and pipes. brackets. throttle cable ect..
  • from differing years and models to fit in my j. because gm never made a 3100/3400 in a j-body
  • custom made throttle bracket
  • modified water pump bypass pipe
  • front cover machined to accept '96 3100 style power steering pump
Suspension/Wheels/Brakes:
  • BF Goodrich G-force KD 225/50 ZR15 tyres
  • rims are factory 92 gt. aluminum 15x6's
  • Stock Rims Repainted Ford Medium Titanium Metalic "Bullit" style rim colour
  • outer lip on rims polished
  • Koni yellow adjustable sport shocks -rear
  • stock springs
  • Energy Suspension PolyUrethane Front Control Arm bushings
Interior:
  • custom made short throw stainless steel shift rod (thanks murray) with a Hurst T handle shifter
  • Lo Tek engineering "A" pillar dual gauge pod
  • Autometer 2-1/16 Sport Comp guages
  • oil pressure (in pod)
  • water temp (in pod)
  • vacuum (in dash where old factory radio control used to be)
  • Air Fuel ratio gauge (in dash)
  • Autogage 5inch Monster tach with shift light.
Exterior:
  • all stock badging removed and replaced with 2000 grand am gt grey "GT" and "V6.H.O." emblems.
  • one gt on deck lid one on each door
  • v6ho badge on front fenders
  • stock Zed24 style hood installed
  • underside of hood has been cut out to remove heat from back of hood through the cowls.
Miscellaneous:
  • as of June 13th 2004 best run to date is 14.391 @ 96.479 mph in the 1/4
  • Bully Clutch's Stage 2 performance clutch
  • Engineered Performance Limited Slip Differential
  • EP LSD
  • Transmission has been updated with a Close Ratio 4th gear
  • 3.94:1 Ratio Final Drive Gear. (stock is 3.61:1)
  • all work on car has been done by myself including porting work
  • NEED PORT AND POLISHING WORK DONE? Email Me!
  • [Aaddzz Counter] people have viewed this car since APRIL 28 2002
Future:
  • Parts waiting for install: Autometer EGT gauge
  • Future mods: custom front coil-overs
  • new rear springs
  • Custom new Shifter assembly.