Brad Wheeler

fast97z24


Location: Sioux City, IA.
Joined: Wednesday, January 15, 2003
Last Update: Saturday, February 28, 2015
Last Seen: Saturday, December 21, 2019

Email: BassHead_69@hotmail.com

2001 Chevrolet Cavalier Z-24

Body Style: Coupe
Color: Ultra Silver Metallic
Engine: 2.4L Twin Cam
Transmission: Manual
Interior: Graphite w/ red speckle
Purchase Date: 6-4-14
Purchased From: Shawn McKenzie


MODIFICATIONS

Engine:
  • Block bored .040 over
  • 2.3 oil pump swap
  • Ray Nissen oil pump pickup adapter block
  • Melling 182-S oil pump pickup
  • ARP Main Studs
  • Ray Nissen gutted and knife edged crank
  • Jet 2.3 Quad 4 titanium rods narrowed to fit 2.4 crank
  • Diamond .040 over flat top forged pistons-crowns coated with thermal barrier - skirts coated with anti-friction - custom machined accumulator grooves
  • Total Seal rings - Advanced Placement stainless steel top ring - gapless second ring
  • C77 std rod bearings
  • C77 std main bearings
  • ARP head studs
  • Lightly ported/polished head - chambers blended and completely mirror polished
  • SI Valves 1mm oversized stainless steel swirl polished valves - mirror polished faces
  • SI Valves bronze valve guides
  • SI Valves Viton valve seals
  • Crower valve springs
  • Clyde Moore spec'd Trick Titianium titanium retainers
  • Cometic .040 MLS head gasket
  • Comp Cams custom reground to.430 / 238* exhaust and .420 / .232* intake camshafts
  • HO Quad 4 intake manifold with 2.4 flange welded on - completely port matched inside to head and tb
  • Stock LD9 intake manifold flange spacer -port matched to intake and head
  • .030 teflon head to spacer gasket
  • SMG 58mm throttle body
  • .030 teflon tb to intake gasket
  • Pacesetter 4-1 ceramic coated and DEI titanium wrapped header - ported flange and blended to piping - custom scavenging pyramid welded inside the collector
  • 2.5" exhaust piping
  • 18" resonator
  • Vibrant chambered muffler
  • LZM upper engine mount - mirror polished
  • RK Sport lower dogbone mount
  • Prothane poly trans mount bushings
  • OBX torsen LSD
  • Bully stage 4 clutch
  • Mantapart lightened flywheel
  • B&M short throw shifter
  • BPS shift cable clamp
  • BPS shifter base bushings
Suspension/Wheels/Brakes:
  • Tein SS coilovers
  • RK Sport rear strut tower brace
  • Vibrant front strut tower brace
  • Phil Lindsay lower radiator support brace that ties into the subframe
  • TTR K-brace
  • Addco rear sway bar
  • Prothane control arm bushings
  • Ro_JA LT5 17X7 wheels