Classifieds: Engine

Turbo Grind Comp Cams--Forged Internals--Magnaflow -- RK Mounts--& a whole lot more. Take a look!
Sunday, October 21, 2012
Here's the album of everything I have for sale. Figured it would suck to post 73 pictures. Make an offer on anything, need monies.
J-body parts for sale pics!!!
BLUE Still for sale
RED SOLD
Shipped prices are to lower 48, if not stated as "shipped" shipping is not included.

you have a better chance with my email for same day response...
e.knight1(AT)me.com


Still have head/pistons.rods
Used 3k miles, some carbon buildup on head from running lean/rich.
NEED IT GONE PLEASE MAKE AN OFFER
COMP CAMS:
$325 shipped anywhere in the US. (only firm for sale)

Eagle Rods: $215 SHIPPED

Weisco Pistons: $270 SHIPPED

Rods/Pistons are still together in block... BOTH: $400 shipped


Will ship cams within 2 days of payment
Pistons/rods within 3 days.






$105 SHIPPED RK Upper&Lower mounts.

Short-Ram custom made intake w/ spectre filer (don't hate) all pieces in 1st pic included. Will fit right in. Also comes with throttle cable bracket to clear the elbow.
$50 shipped



Magnaflow Dual Tip Cat-back. It's a solid piece, just not to my liking with the muffler sound. The piping is 2.5 (maybe 2.75) and would actually make a great system if you subbed the mufflers, or just cut them off or converted into single. The piping is the most valuable IMO
MAKE OFFER - PLEASE make an offer, I'm not using this and never will be.

http://img444.imageshack.us/img444/7590/forsale17.jpg

http://img266.imageshack.us/img266/3990/forsale15.jpg
http://img189.imageshack.us/img189/1328/forsale14.jpg
http://img341.imageshack.us/img341/5158/forsale12.jpg

Stock manifold, downpipe, cat, and flange (in 3 pieces, easily welded back together)
$100+ shipping MAKE OFFER

http://img845.imageshack.us/img845/8607/forsale21.jpg

Stock L61 intake manifold, out of an 04' Cavi
$25+ shipping



2004 Cavalier automatic full engine harness. NO WIRES CUT... except for 1 ground terminal that broke, and the 02 sensors were cut w/ both ends of plugs.
$90+ shipping


$5 + shipping
Valve cover off of an L61... it has a hole in it from drilling out the rivets.


NX panel switch - again, brand new, tested w/ test light and battery. 100% working
$50 Shipped


OBO
04 Cavalier L61 brake booster vac tube

OBO
2.75" to 3" Turbonetics silicone adapter

OBO/b]
Stock 02-04 eco fuel rail /w injectors (does not come with the harness)


Have 2 of these
$10 Shipped EA


00+ radio harness.
$5 shipped


$200-OBO Sundown audio SA-12 Dual 2
Do have the packaging that it came shipped in, but it was expensive shipping. Box can come with it for an extra $15+shipping


$115-OBO MB Quart ONYX 1500.1d




below is SOLD
SOLDCustom fabricated intake. Oringed like stock, except bigger!.... flange was decked after welding.
SOLD
underside w/ vacuum ports.
http://img525.imageshack.us/img525/8288/forsale19.jpg
on car
http://img820.imageshack.us/img820/9059/turbobuild32.jpg
http://img801.imageshack.us/img801/2543/turbobuild1.jpg
http://img593.imageshack.us/img593/8039/turbobuild24.jpg


NX Proton series nitrous kit. Will piece out, sell without the tank, but the nozzle/jets/short lines star together.
$300+shipping on kit


http://img32.imageshack.us/img32/5381/forsale37.jpg
http://img440.imageshack.us/img440/8572/forsale38.jpg

AutoMeter remote Nitrous pressure gauge /w sending unit. This is brand new, opened, tested, and 100% working.
$90+shipping

http://img407.imageshack.us/img407/9774/forsale40.jpg

Nitrous bottle brackets!
$7.50 Shipped for the black plastic one
$12.50 Shipped for the metal t-bolt style one


Some T-12 model turbo's incase anyone has a gocart or bike.
$50 ea +shipping (2 left #3 is gone) -- Check end of album
Ad Type: For Sale
Email: (email unlisted)
Location: Cleveland, OH
Price: 600 USD
Sites: j-body.org
Regions: Global
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Monday, August 06, 2012 8:10 AM
ill buy the intercooler off ya
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Monday, August 06, 2012 11:48 AM
hahaha. I'm taking that to the grave with me. What do you think hahn IC's are worth by themselves anyways?



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Monday, August 06, 2012 10:43 PM
Any pics of the hole on the cam cover?


"United by Individuality"
"If life is a joke, why aren't we laughing?"
"Normality depends on one's perception of reality."
http://www.cardomain.com/ride/3820803
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Tuesday, August 07, 2012 12:29 AM
You can see it in the picture. In the middle near the bottom right below the spark plug hole, not much to see from the underside, the baffle is still in there.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Thursday, August 09, 2012 3:52 AM
Chris, I may have an IC for $65 shipped next week. Gotta check for boost leaks and whatnot first.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Saturday, August 11, 2012 3:30 AM
I will give you $20 shipped for the fuel rail and lines


If your interested in custom aluminum tilt wheel levers hit me up!
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Saturday, August 11, 2012 4:13 AM
PM



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Tuesday, August 14, 2012 8:00 PM
I am assuming that intake has a place for the IAT also?

if so I am interested.






http://www.myspace.com/yourfavoriteprofile
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Sunday, August 19, 2012 12:35 AM
Yes, the grommet from your intake IAT will fit right in. Took many minutes of careful dremeling haha.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Wednesday, August 29, 2012 12:44 AM
N2o stuff is gone, all that's left is engine internals and whats up there ^^



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Thursday, September 13, 2012 12:15 AM
comp cam part number?
how many miles on em?
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Thursday, September 13, 2012 7:31 AM
PM'd on the manifold.


Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Thursday, September 13, 2012 8:52 AM
PM ON THE TURBO MAN





Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Thursday, September 13, 2012 12:14 PM
3k on the comp cams, paper work is with em. I think the part number is in the pics, anyways they're the turbo grind...

Norwood's got 1st dibs on the manifold, unless he low balls me lol.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Thursday, September 13, 2012 6:09 PM
Hey whats the diameter of the piping for the exhaust ??
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Saturday, September 15, 2012 9:31 PM
where are you located?


...you want a pic, then help me build something worth taking a pic of....
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Sunday, September 16, 2012 10:09 AM
Interested in stage 2 head! Still have it?



"FRIENDS DON'T LET FRIENDS DRIVE STOCK"



Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Sunday, September 16, 2012 12:15 PM
Still have the head. PM sent.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Tuesday, September 18, 2012 9:45 AM
patriot head is now sold just sent the money


gilligan
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Tuesday, September 18, 2012 11:44 AM
Exhaust mani is sold too, just sent the money.


Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Tuesday, September 18, 2012 3:57 PM
Good deal guys.
The head will ship out soon, I'm still trying to play tetris with 2x4's

And jason, the manifold will ship out day after I get my spark plug rebate :p



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Thursday, September 20, 2012 7:30 PM
What would would the shipping cost on the valve cover be to 33991? Also is the hole repairable that is in it?


Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Wednesday, September 26, 2012 6:01 PM
PM'd, lpoking for a 2.2L crankshaft.
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Sunday, October 21, 2012 5:57 PM
PMs Replied to, you have a better chance with my email for same day response...
e.knight1(AT)me.com



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Sunday, October 21, 2012 10:11 PM
Sorry just saw this. Knew you would say no lol.
I talked to bill on selling just the ic is 400 and 700 with pipes.
I actually have one dont like it tho can you send me pics of the extra you said you had?
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Friday, October 26, 2012 9:51 PM
injectors fit without mods and how many lb/hr are they?
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Tuesday, November 06, 2012 1:57 PM
Would the short ram fit a 97 2.2L?
Re: Clearing out the clutter! Fabbed intake, Turbo mani, a couple audio things & a whole lot more. Take a look!
Tuesday, November 06, 2012 7:47 PM
INBOX ME ON EXHAUST I'M TRYING TO GET IT TOMORROW
Forum Post / Reply
You must log in before you can post or reply to messages.