Not really lookin forward to doin throttle bodies to tell the truth, i want to do them but havent gotten to that yet. I was thinkin more of when i have a finial release of my intake manifold of having one available with a flange for a larger throttle body.

<br>

-----------------------------------
www.exploitedracing.com
-----------------------------------

Nice job Brian!!!!! Now I can pick up mine from Chris

I might hit you up for a couple 'thermal barrier' spacers...... I have a few projects that could use them.

anyways, good work!

<br>

SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

Brian im going to shoot you an e-mail shortly about an intake manifold design i have... very simple, very effiecient. I designed it with all-motor apps in mind but it should work great with boost with a certian TB upgrade. Only issues would be to get the TPS to read right... other than that, the sky is the limit.

<br>

Any pics of the phenolic spacer/adapters? I'd be interested if you include the hardware, but I wanna see a pic of the phenolic version badly! <br>

15.3 @ 89.97mph, 14's on the way?
For Sale:
Getrag tranny mounts (urethane filled) $100CAN
'01 SFGT springs(75,000kms) & rear struts(5000kms) $100CAN
'01 2.4 flywheel, pressure plate, cams used (free, you pay shipping)

i gotta make one first.. i only made the aluminum version so far sorry.

<br>

-----------------------------------
www.exploitedracing.com
-----------------------------------

Okay diggin this up from the grave but at least it proves I did search!

Anyways I was wondering what the advantage/disadvantage of having the aluminum or phenoic versions?

Also, Do these include the needed studs and/or can someone tell me exactly what size is needed? <br>

<img src="http://memimage.cardomain.net/member_images/11/web/491000-491999/491827_30_full.jpg">

^ That was me posting (My bro's account) He left it logged in. <br>

just thought i'd throw this out there.....

Convertion????

it's spelled "Conversion"

It's also spelled wrong on your website. <br>

<IMG SRC="http://www.j-body.org/registry/kernol/sig.jpg">

Now that i have both brians in this post.

exploted brian- u get birdy's parts figured out?

b-lo- did u grab the ones u have over with my brother? If not i will grab them on thanksgiving and bring them over when we stop over sometime friday. Been trying to call with no luck.


how much does mantapart want for something like this? i seen something about a flange with like 2 inchs of stuff welded to it. I havent looked much into it.

and include hardware with the flanges too, nuts and bolts arnt that expensive. <br>

Exploited Brian: have you got phenolic spacers made yet? I e-mailed you a month or more about them, but havn't seen any updates since. I'm looking for a pic, and a price with hardware. <br>

15.3 @ 89.97mph, 14's on the way?
For Sale:
Getrag tranny mounts (urethane filled inserts with mounts) $100CAN
'01 SFGT springs(75,000kms) & rear struts(5000kms) $100CAN for both

So what are the advantages/disadvantages? I am getting ready to order one and I need to know what justifies the extra $10 bux <br>

^ just look up on honda sites, or check out jacksonracing.com .

I got one of them spacers in my garage. I should snap a picture of it. Looks great. <br>

Well I ordered mine on the 7th or 8th of november. Still waiting to get it. He told me it would be shipped out in a few days and he would send tracking info, the 18th or so came by with no tracking info, asked him what was up, said he was busy b/c he was in a wedding, and said it would be shipped out on monday the 22nd, waited till then, asked again if it was in the mail, said the parts are made, but the UPS stores were closed till monday the 29th, ok so now its the 1st and i havent heard anything from him after two emails in the past day or so.

So whats up, whers my parts. <br>


Click the banner to enter the best Quad4 & Twin Cam site on the internet.

At the shopiola, stupid stuff keeps coming up, i made 2 of these flanges over thanksgiving weekend and now im sick with the flu! I do appologize for the wait, i just got your emails too but ill just reply here. I may very possibly be going back to the shop today and will ship it.



<br>

-----------------------------------
www.exploitedracing.com
-----------------------------------

The wait isnt bothering me since its getting colder out and what not, its just you seem to give me a different reason why the part didnt ship. If you would have said from the get go that the part would have taken a month to be shipped i would have said ok, thats fine. but this run around crap isnt helpful. <br>


Click the banner to enter the best Quad4 & Twin Cam site on the internet.

im not trying to give any run around, i had expected for it to be done when said but stuff kept coming up over and over.

email me for the tracking number.

<br>

-----------------------------------
www.exploitedracing.com
-----------------------------------

So You have one ready? Cause I really want to order one but I havent cause I wanted to contect you to see if they are made yet. Do you have the alum. or Garolite ones made up? If I go place the order right now how long will the wait be?

Oh and btw whats the status of getting the needed studs? <br>

Are there ANY ready? <br>

I'm still wondering as well, what's the status on the phenolic spacers, and the hardware? <br>

15.3 @ 89.97mph, 14's on the way?
For Sale:
Getrag tranny mounts (urethane filled inserts with mounts) $100CAN
'01 SFGT springs(75,000kms) & rear struts(5000kms) $100CAN for both

i order the garolite one, and thats the one im waiting on so im guessing he has some made, and when you order he will just make some.

I would also like to know about longer studs/bolts <br>


Click the banner to enter the best Quad4 & Twin Cam site on the internet.

ok well i got the flange, it looks great.

I wanted to know if anyone knows the size and length of the stock bolts and studs for the intake manifold. i was just going to see if ARP had some. Anyonek now?? <br>


Click the banner to enter the best Quad4 & Twin Cam site on the internet.

Will this work in conjunction with the EGR?
<br>

<img src="http://www.j-body.org/registry/therealgreco/thumbnail_Sig.jpg">
RepraZenT
<b>ThE rEaL gReCo</b>
<a href="http://www.ny-jbodies.org/forum/library/How2/2.3homod/2.3homod.htm">2.3 HO Intake Manifold Swap</a>

What do you mean will this work with the EGR? Are you asking if it will clear now with the 1/2inch flange? <br>


Click the banner to enter the best Quad4 & Twin Cam site on the internet.

Nevermind... I now see that it blocks off the egr so there is no need for it anymore
<br>

<img src="http://www.j-body.org/registry/therealgreco/thumbnail_Sig.jpg">
RepraZenT
<b>ThE rEaL gReCo</b>
<a href="http://www.ny-jbodies.org/forum/library/How2/2.3homod/2.3homod.htm">2.3 HO Intake Manifold Swap</a>

how does it block off the EGR?? <br>


Click the banner to enter the best Quad4 & Twin Cam site on the internet.