its been reposted, just read the thread

some people.




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

here's an exerpt from a honda webpage that i found....simple google searched it:
"Originally posted by SLO-S2000
Ok...I got this tip from some of the local car enthusiasts...and this is one cheap O2 simulator.

It works, and there is no need to cut any wires or anything...very easy as well.
I personally have driven about 300 miles since, no CEL. So anybody who wants to run a test pipe...here is the mod you should do to stop the CEL...don't bother with the electronic ones with only some of them working...and not working all the time. These pics are from it being done STi, but I did it on my S, works just the same.

http://img.photobucket.com/albums/v174/silent_assailant_t/TXS004c.jpg
http://img.photobucket.com/albums/v174/silent_assailant_t/Help003b.jpg
http://img.photobucket.com/albums/v174/silent_assailant_t/Help001b.jpg

Those are the Spark plug, Anti-Foulers you'll need to do this..just pick them up at any auto parts store.

This modification effectively reduces the amount of exposure the secondary O2 has to the exhaust stream. This mod will allow the 5g and '96 4g guys to avoid the CEL for poor cat performance without having to do the dubious OBD2 "workaround" and pass OBD2-based emissions testing."

and here's the link to the honda webpage in case some want to head there for imports
http://www.preludeonline.com/showthread.php?t=172730&goto=nextnewest

finally, thank you

np at all, glad i can help out

ya thank you so much man

sorry but i got a quick question, when you drill out one of the antifoulers do you drill out the whole thing or just half of it?

thugn$ wrote:damn sorry to bring this back from the dead but the link aint workin, how do you do this?

I'm not trying to be a dick, because I hate to see people post and say search. I'm not going to say search, but READ. If you would have read all of this topic and not just the first post you would have seen this

Quote:


First I want to say sorry. I just realized what you guys were talking about with the account being suspended. That is not my account.

What you need is a spark plug antifouler. 18mm. You can get them at AutoZone, PepBoys. Most parts stores. 2 come in a package. You need 2 so just one package. They are about $3. You take one of them and drill it out with a 1/2 drill bit. The other one you leave alone. The one you drilled out your O2 sensor screws into it, and then it screws into the other one (the one you did not drill). now you screw the whole thing into your hole for the O2 sensor. Make sure you tighten it really good. You are done. I have some pictures, but having computer issues. Does anyone want to host them?.

That there tells you how to do it, and what is needed.
Also when you posted this yesterday about 5 topics down was this post
Cheaper O2 sim mod
That also has the directions in it as well.
All I'm saying is just pay attention.



FU Tuning

hey atleast i didnt make a new topic ,thanx anyways man

yes drill out 1 whole antifouler! Awesome thing to do, still no CEL and it's been MONTHS waaaa hoooo

does it need to be placed back inside the cat to still work? because I want to completely gut my cat


<img src="http://n.lange.home.mchsi.com/redlinefire.jpg">
"What the fawk are you talking about? That was the most
incoherent, retarded, off the subject post EVER!"
-Anti-Post Whore (Lurch)

RedlineFIRE wrote:does it need to be placed back inside the cat to still work? because I want to completely gut my cat

It needs to be placed in the exhaust. Where every your O2 sensor bung is put it there.



FU Tuning

i currently have no cat i need to get a test pipe then but i couldnt find one for our cars



"What the fawk are you talking about? That was the most
incoherent, retarded, off the subject post EVER!"
-Anti-Post Whore (Lurch)

RedlineFIRE wrote:i currently have no cat i need to get a test pipe then but i couldnt find one for our cars

If you have not cat currently, what is where the cat was? Pipe? All you have to do is put a O2 bung in the exhaust, and then this sim.



FU Tuning

theres only a stock header on my car the o2 sensor is just hanging around



"What the fawk are you talking about? That was the most
incoherent, retarded, off the subject post EVER!"
-Anti-Post Whore (Lurch)

man.. it took me awhile to remember what CEL meant, i was so lost in this thread til the last few posts

http://www.cardomain.com/ride/2208703

ok iv been looking like crazy for these anti foulers and no luck what so ever, is there a online source where i can order some?

i got mine at Advanced Auto! But it bought 2 packs, so i have a pair here already drilled and tested. If you want them, PM me!

k, so you plug the 1st one into the bung on the exhaust then bore the 2nd one with a 1/2 drill bit all the way through?

correct

just so u guys know it does not work for the ecotecs, i just got it done and a code popped up in 1 hour from when i got it done

what about the 00+ 2200 or Twincams? anyone tried it with a twin cam yet?


_______________________
** Flat Broke Racing Inc.**

hopfully u have better luck then i did

thugn$ wrote:just so u guys know it does not work for the ecotecs, i just got it done and a code popped up in 1 hour from when i got it done

It works great on my ecotec...

Aaron52788 wrote:

thugn$ wrote:just so u guys know it does not work for the ecotecs, i just got it done and a code popped up in 1 hour from when i got it done

It works great on my ecotec...

how u figure? maybe i can fix mine, i did exactly what was spose to be done