im in for this, dont need fittings however, and i take it the ports are -6 o ring boss?
Here is Earl's listing...
-6 9/16, straight o-ring
Sorry for the colors below. That is all summit stocks.
Summit racing part.
Brand: Earl s Performance
Manufacturer's Part Number: 949006ERL
Part Type: Coupler Fittings
Product Line: Earl's Performance Couplers
Summit Racing Part Number: EAR-949006ERL
UPC: 021432221023
Fitting Size 1: -6 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -6 AN O-ring
Fitting Attachment 2: Male threads
Fitting Angle: 90 degree
Fitting Finish : Blue anodized
Fitting Material Aluminum
Quantity: Sold individually.
Notes: Swivel on O-ring end.
Plug adapter for electronic fuel pressure gauge from summit.
Brand: MagnaFuel
Manufacturer's Part Number: MP-3071
Part Type: Pressure Gauge Adapters
Product Line: MagnaFuel Pressure Gauge Adapters
Summit Racing Part Number: MRF-MP-3071
Fitting Angle: Straight
Fitting Attachment 1: Male O-ring
Fitting Size 1: -6 AN
Fitting Attachment 2: Female threads
Fitting Size 2 : 1/8 in. NPT
Fitting Material: Aluminum
Fitting Finish: Purple anodized
Plug Included: No
Quantity: Sold individually.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
-MD- Enforcer wrote:Prices are looking to be $75ish each, for 10. Not encluding fittings, I went to summit today, and adapter fitting is 6- 9/16 straight thread, which is kinda wierd. I'm still looking for some prices on fittings. Earl seems to be the cheapest so far.
its just regular -6 orb fitting. The same thats used for aeromotive and some other AFPRs.
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
DSMskyline wrote:-MD- Enforcer wrote:Prices are looking to be $75ish each, for 10. Not encluding fittings, I went to summit today, and adapter fitting is 6- 9/16 straight thread, which is kinda wierd. I'm still looking for some prices on fittings. Earl seems to be the cheapest so far.
its just regular -6 orb fitting. The same thats used for aeromotive and some other AFPRs.
I'm just going by what summit told me.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
1. Michael Davis, -MD- Enfocer, QTY. 1
2. John Benham, QTY. 1
3.
4.
5.
6.
7.
8.
9.
10.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
ah i bought the used one in teh reigonal section, sorry didnt know when theyre were happening gotta get going on this.
1. Michael Davis, -MD- Enfocer, QTY. 1
2. John Benham, QTY. 1
3. Chris Casimbon, QTY. 1 (2200)
4.
5.
6.
7.
8.
9.
10.
--------------------------
NCR-SCCA
Can we get 5 people?
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Anyone else, or this is probably going die.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Im game for one for 2.4 fuel rail. kenkissell@yahoo.com. how many more do you need to keep it alive depending on cost i have a spare fuel rail i wouldnt mind havin one for as well.
thanks
-MD- Enforcer wrote:Prices are looking to be $75ish each, for 10. Not including fittings...
1. Michael Davis, -MD- Enfocer, QTY. 1
2. John Benham, QTY. 1
3. Chris Casimbon, QTY. 1 (2200)
4. kenneth kissell, QTY. 1
5.
6.
7.
8.
9.
10.
I really need a few more people. I do not like fronting to much money. I may have extra after my tax return.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
im interested but cant commit to pay until I do my taxes. im 90 percent sure that ill be getting enough back to buy one though.
1. Michael Davis, -MD- Enfocer, QTY. 1
2. John Benham, QTY. 1
3. Chris Casimbon, QTY. 1 (2200)
4. kenneth kissell, QTY. 1
5. Chris Isaacs, QTY 1
6.
7.
8.
9.
10.
Any idea on how long it will take to get these shipped off???
It all depends on when everyone pays. My buddy should have them done in less than two weeks after I pay him.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Ok, So...when do you want payment?
After we have more people on the list.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
for those of us not super educated... explain the benefit of eliminating fuel pressure regulator. and would this be beneficial as an early upgrade or later in the process?
its not to eliminate the regulator... its an adapter that allows you to run a remote regulator. ie, a good one.
If it takes forever.... I will die trying. Underdog Racing
Yes, You want one now! Early upgrade, this might not happen EVER AGAIN!!!
Add me down for one
GMR has got nothing on this
1. Michael Davis, -MD- Enfocer, QTY. 1
2. John Benham, QTY. 1
3. Chris Casimbon, QTY. 1 (2200)
4. kenneth kissell, QTY. 1
5. Chris Isaacs, QTY 1
6. DOHC Tuner, QTY. 1
7.
8.
9.
10.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I'm waiting to hear back from my buddy. I'll start a Group Purchase soon. I'll just buy the others if need be with my income tax money. I would REALLY like at least two more sold, but I rather just get it done.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
im down let me know when need the money
