Ive looked everywhere, ebay, j-bodyperformance.com, the org and i cant find a CAI for the cavi that goes under the fender!!! help out?
Make one.
Buy some tubing bends, couplers, T-clamps and a filter.
Done
Unless you would rather pay over $200 for something you can make for about $40.
I have one its like 50 bucks on ebay...
Mods: Synapse Charge Piping, Short Throw, Bad-Mab Dp, Dejon Intake, BYT Tuned!
Parts For SALE! Pacesetter Header(ECO),17'in Resonator, Alternator, Starter, Viper Alarm.
brand? and was it 50 bucks after shipping?
brand means nothing on an intake.
the name will only affect the price
It was like a imitation AEM, yea like after shipping like 55 bucks, Sounds great.
Mods: Synapse Charge Piping, Short Throw, Bad-Mab Dp, Dejon Intake, BYT Tuned!
Parts For SALE! Pacesetter Header(ECO),17'in Resonator, Alternator, Starter, Viper Alarm.
I wish they made more CAI options for the 95-97 2.2.
www.gmofhouston.com
They are out there on ebay but they are pricier than the 2.4 ones.
Here is one.
wow. 55 after shipping. the short ram i have now was 75 pieced together at autozone
now that hose that comes off the valve cover into the silence box, i see its now routed to the intake, does the kit supply the hose for that. and the sensor that is orignally in the intake, where does that go. because with my short ram. its just hanging there
Mike wrote:brand means nothing on an intake.
the name will only affect the price
Generally AEM and the like will use more appropriate piping. A 3" intake on a bolt-on LN2 could very easily decrease power output.
fortune cookie say: better a delay than a disaster
Quote:
OHV notec wrote:
Generally AEM and the like will use more appropriate piping. A 3" intake on a bolt-on LN2 could very easily decrease power output.
That intake is 2.75 Inches.. I measured it.
Quote:
Red2.2cavi wrote:
now that hose that comes off the valve cover into the silence box, i see its now routed to the intake, does the kit supply the hose for that. and the sensor that is orignally in the intake, where does that go. because with my short ram. its just hanging there
Everything is in the kit, the hose that included is a piece get a new one from auto zone. it comes with a hole for the Air temp sensor, The grommet for that was also a piece and way to small, i brought one of those from auto zone also.
Mods: Synapse Charge Piping, Short Throw, Bad-Mab Dp, Dejon Intake, BYT Tuned!
Parts For SALE! Pacesetter Header(ECO),17'in Resonator, Alternator, Starter, Viper Alarm.
no, that's fine, just make sure you check the seller and see if they have good feedback, if they do go for it. intake's are one of very few appropriate item's to purchase from ebay. just replace the filter with a k+n after you get it and you've just basically bought a 300 dollar intake for under 100 bucks.
KbRedCavy wrote:That intake is 2.75 Inches.. I measured it.
Everything is in the kit, the hose that included is a piece get a new one from auto zone. it comes with a hole for the Air temp sensor, The grommet for that was also a piece and way to small, i brought one of those from auto zone also.
x2 on both.
Red2.2cavi wrote:now be honest. would i get flamed like crazy and called rice if i got this one?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230429071126&viewitem=
Probably not if it was the only red thing in your engine bay. Please don't go crazy with red wire loom, paint, etc.
I prefer polished myself though.
blucavvy wrote:no, that's fine, just make sure you check the seller and see if they have good feedback, if they do go for it. intake's are one of very few appropriate item's to purchase from ebay. just replace the filter with a k+n after you get it and you've just basically bought a 300 dollar intake for under 100 bucks.
That particular seller is fine. I bought mine (pictured above) from them with no issues whatsoever.
Personally, I would stay away from K&N filters. They need to be oiled to work properly and if over oiled can cause problems with the sensor in the intake, etc. I highly recommend using an AEM Dry Flow filter. It does not need to be oiled and can be washed and re-used pretty much forever.
I'll just use the spectre filter i have on the my short ram. its red as well but no one will see it anyways. thanks for the help guys.
since its alum. could i weld it insted of using the silicone hoses? and then just paint over the welds?
could i mod this one to fit my 97 2.2 i realy like the red im not a polished fan
Chris wrote:They are out there on ebay but they are pricier than the 2.4 ones. Here is one.
Thanks man. Whenever I search I can't seem to find a CAI just a short ram.
www.gmofhouston.com
