FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =] - Page 2 - Mid Central Region Forum

This thread is locked.
For more information about why this thread might have been locked, please read the rules.
Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Monday, February 01, 2010 10:10 AM
UPDATE


L61 goods

3 blocks, 2 are complete engines and i will separate heads if wanted, these are non running. the other is a completely bare block with nothing in it. - make me some offers

SAAB turbo manifold - offer

oil pan - offer

4-2-1 Header + 2 1/4 Catalytic converter - offer

Thermal Reasearch 2 1/4 cat-back exhaust - $300

interior wiring harness for a pre 2k swap. - offer

gmpp supercharger kit, needs t/b adapter, belt, tensioner and a tune, i planned on hpt. its set up with the modified endplate - offer

LD9 goods

Log turbo manifold - $250

HO cams, towers, lifters - $250

Isuzu trans - $100

stock manifolds and throttle bodies - offer

Audio

just give me offers on all this stuff.


2 10" Rockford Fosgate P1 Single Coil Subwoofers.

300-watt Jensen Amp (powering the Bostons)

650-watt Jensen Amp (powering the Subwoofers)

Random

ADR 17" Spade wheels - $600

rk sport lowering springs - $150

Intercooler, i can get dimensions later - $200

PLX dm-100 and the sm-afr wideband kit. - $350

Stock sunfire wheels with Azenis RT-615 tires - offer

95-99 main dash - $45

2k headlights - offer



Sold

eagle rods - $300

wiseco 10:1 pistons - $400

Boston Acoustics 6.5" Component front speakers

Q-Logic front kick panels (house the boston acoustic speakers)

Header and exhaust

AEM Cold Air Intake








im interested in trades for bmx bike parts, let me know what you got.







Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Monday, March 15, 2010 8:47 PM
UPDATE with new stuff!!!

its tax time people, buy buy buy!!


L61 goods

Built engine, specs: Forged rods(Eagle H-Beam), pistons(Wiseco) 10:1, Fully Balanced Engine (Crank was also polished) Balance Shafts Removed Fidanza Aluminum Flywheel Spec Stage 2 Clutch - offer

2 blocks, 1 is a complete engine and i will separate the head if wanted, non running. the other is a completely bare block with nothing in it. - make me some offers

SAAB turbo manifold - offer

oil pan - offer

4-2-1 Header + 2 1/4 Catalytic converter - offer

Thermal Reasearch 2 1/4 cat-back exhaust - $300

interior wiring harness for a pre 2k swap. - offer

gmpp supercharger kit, needs t/b adapter, belt, tensioner and a tune, i planned on hpt. its set up with the modified endplate - PENDING

LD9 goods

Log turbo manifold - $250

2.3 HO manifold - offer

HO cams, towers, lifters - $250

Isuzu trans - $100

stock manifolds and throttle bodies - offer

Audio

just give me offers on all this stuff.


2 10" Rockford Fosgate P1 Single Coil Subwoofers.

300-watt Jensen Amp (powering the Bostons)

650-watt Jensen Amp (powering the Subwoofers)

1 farad Audiobahn capacitor - $40

Random

ADR 17" Spade wheels - $600

rk sport lowering springs - $150

Spearco Intercooler, i can get dimensions later - $200

Stock sunfire wheels with Azenis RT-615 tires - offer

stock 95-99 z24 wheels and tires

95-99 main dash - $45

2k headlights - offer



Sold

eagle rods - $300

wiseco 10:1 pistons - $400

Boston Acoustics 6.5" Component front speakers

Q-Logic front kick panels (house the boston acoustic speakers)

Header and exhaust

AEM Cold Air Intake

PLX dm-100 and the sm-afr wideband kit. - $350

1 of the blocks - $200




im interested in trades for bmx bike parts, ipod, stuff i could use at college, let me know what you got.



Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Thursday, April 08, 2010 3:27 PM
bump for new shoes!!





Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Thursday, April 08, 2010 8:06 PM
Pm sent


black 03 z24 with a few mods
Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Thursday, May 20, 2010 4:08 PM
stuff still for sale people







Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Thursday, May 20, 2010 4:21 PM
updated list?

-Seth



Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Saturday, May 22, 2010 12:19 AM
UPDATE




L61 goods

Eagle Forged Crank - offer

2 blocks, 1 is a complete engine and i will separate the head if wanted, non running. the other is a completely bare block with nothing in it. - make me some offers

Getrag trans - offer

SAAB turbo manifold - offer

oil pan - pending shipping

4-2-1 Header + 2 1/4 Catalytic converter - offer

Thermal Reasearch 2 1/4 cat-back exhaust - $300

interior wiring harness for a pre 2k swap. - offer

gmpp supercharger kit, needs t/b adapter, belt, tensioner and a tune, i planned on hpt. its set up with the modified endplate - PENDING

LD9 goods

Log turbo manifold - $250

2.3 HO manifold - offer

HO cams, towers, lifters - $250

2.3 power steering setup

stock manifolds, throttle bodies, fuel rail - offer

2.4 cams, towers, lifters - offer



Audio

just give me offers on all this stuff.

Phoenix Gold ZX-500 Amp

2 10" Rockford Fosgate P1 Single Coil Subwoofers.

300-watt Jensen Amp

650-watt Jensen Amp

1 farad Audiobahn capacitor - $40

Random

ADR 17" Spade wheels - $600

rk sport lowering springs - $150

Spearco Intercooler, i can get dimensions later - $200

Stock sunfire wheels with Azenis RT-615 tires - offer

95-99 main dash - $45

2k headlights - offer

Red speckled door panels, slight cracking - offer

Red and black aftermarket steering wheel, brand new - $30 shipped

Sold

eagle rods - $300

wiseco 10:1 pistons - $400

Boston Acoustics 6.5" Component front speakers

Q-Logic front kick panels (house the boston acoustic speakers)

Header and exhaust

AEM Cold Air Intake

PLX dm-100 and the sm-afr wideband kit. - $350

1 of the blocks - $200

Isuzu trans - $100



open for trades






Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Monday, June 07, 2010 11:47 AM
Are the LD9 HO cams modified to fit the 2.4L oil pump?



Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Monday, June 07, 2010 7:59 PM
Dustnyou wrote:Are the LD9 HO cams modified to fit the 2.4L oil pump?


Might want to rethink that statement lol




Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Tuesday, June 08, 2010 2:05 AM
blue02zee24 wrote:
Dustnyou wrote:Are the LD9 HO cams modified to fit the 2.4L oil pump?


Might want to rethink that statement lol



lol and no the cams are unmodified, its really unnecessary to do that anymore. if you want power steering swap to an electrical power steering pump so you can clean up your bay and not have lines running everywhere and a pump hangin off your cam tower.







Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Tuesday, June 08, 2010 6:01 PM
What's brand are the headers?


Oh s***, he has two fire extinguishers in there!

Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Wednesday, June 09, 2010 8:01 AM
the header for the ecotec i do not know what brand, it came on a car i bought. its the 4-2-1 style that swoops upward first and was armor coated but it has came off in spots.







Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Wednesday, June 09, 2010 8:18 AM
PM'D



Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Thursday, June 10, 2010 2:20 PM
whats pending mean?



Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Thursday, June 10, 2010 2:26 PM
Smoosh wrote:whats pending mean?



idk i thought i asked you the same question recently and you were vague







Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Friday, June 11, 2010 5:25 PM



L61 goods

Eagle Forged Crank - offer

2 blocks, 1 is a complete engine and i will separate the head if wanted, non running. the other is a completely bare block with nothing in it. - make me some offers

Getrag trans - offer

SAAB turbo manifold - offer

oil pan - pending shipping

4-2-1 Header + 2 1/4 Catalytic converter - offer

interior wiring harness for a pre 2k Ecotec swap. - offer

gmpp supercharger kit, needs t/b adapter, belt, tensioner and a tune, i planned on hpt. its set up with the modified endplate - PENDING

LD9 goods

Log turbo manifold - $250

2.3 HO manifold - offer

HO cams, towers, lifters - $250

2.3 power steering setup

stock manifolds, throttle bodies, fuel rail - offer

2.4 cams, towers, lifters - offer



Audio

just give me offers on all this stuff.

Phoenix Gold ZX-500 Amp

2 10" Rockford Fosgate P1 Single Coil Subwoofers.

300-watt Jensen Amp

650-watt Jensen Amp

1 farad Audiobahn capacitor - $40

Random

ADR 17" Spade wheels - $525

rk sport lowering springs - $150

Spearco Intercooler, i can get dimensions later - $200

Stock sunfire wheels with Azenis RT-615 tires - offer

95-99 main dash - $45

2k headlights - offer

Red speckled door panels, slight cracking - offer

Red and black aftermarket steering wheel, brand new - $30 shipped

Sold

eagle rods - $300

wiseco 10:1 pistons - $400

Boston Acoustics 6.5" Component front speakers

Q-Logic front kick panels (house the boston acoustic speakers)

Header and exhaust

AEM Cold Air Intake

PLX dm-100 and the sm-afr wideband kit. - $350

1 of the blocks - $200

Isuzu trans - $100

Thermal Reasearch 2 1/4 cat-back exhaust - $300



i need that mula






Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Saturday, June 12, 2010 6:56 PM
Still waiting on shipping quote about the oil pan . let me know.


peformance parts for sale!! Click:
http://www.j-body.org/classifieds/engine/62265/
Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Sunday, June 13, 2010 11:39 PM
ecoweapon wrote:Still waiting on shipping quote about the oil pan . let me know.


sorry man i lost your contact info and couldnt get it to you. now im up in MN and the pan sits in IL. i prob wont be shipping an item like that.







Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Monday, June 21, 2010 1:14 AM
u have Saab exhaust mani still?





Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Monday, June 21, 2010 9:10 AM
ecoweapon wrote:Still waiting on shipping quote about the oil pan . let me know.




i am back in IL now and have more free time, if you still need an oil pan i can ship it out. its going to be at least 20 to ship cuz i just got a set of cams in the mail aand they cost 26 to ship







Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Friday, June 25, 2010 8:41 AM
some new goods added to the list


L61 goods

Vulcan Turbo log Manifold - offer

440cc injectors and pre wired Eco injector harness - offer

Charge piping, couplers, XS Power intercooler, Bov - offer

Oil pan tapped for turbo - $40

Patriot valvetrain - offer

Eagle Forged Crank - offer

2 blocks, 1 is a complete engine and i will separate the head if wanted, non running. the other is a completely bare block with nothing in it. - make me some offers

Getrag trans - offer

SAAB turbo manifold - pending

oil pan - pending shipping

4-2-1 Header + 2 1/4 Catalytic converter - $100 + your stock setup

interior wiring harness for a pre 2k Ecotec swap. - offer

gmpp supercharger kit, needs t/b adapter, belt, tensioner and a tune, i planned on hpt. its set up with the modified endplate - PENDING

LD9 goods

Log turbo manifold - $250

2.3 HO manifold - offer

HO cams, towers, lifters - $250

2.3 power steering setup

stock manifolds, throttle bodies, fuel rail - offer

2.4 cams, towers, lifters - offer



Audio

just give me offers on all this stuff.

Phoenix Gold ZX-500 Amp

2 10" Rockford Fosgate P1 Single Coil Subwoofers.

300-watt Jensen Amp

650-watt Jensen Amp

1 farad Audiobahn capacitor - $40

Random

Precision 60 trim turbo 6031e need rebuild - offer

ADR 17" Spade wheels - $525

rk sport lowering springs - $150

Spearco Intercooler, i can get dimensions later - $200

95-99 main dash - $45

2k headlights - offer

95-99 headlights - offer

95-99 tail lights- $30

Red speckled door panels, slight cracking - offer

Red and black aftermarket steering wheel, brand new - $30 shipped

Sold

eagle rods - $300

wiseco 10:1 pistons - $400

Boston Acoustics 6.5" Component front speakers

Q-Logic front kick panels (house the boston acoustic speakers)

Header and exhaust

AEM Cold Air Intake

PLX dm-100 and the sm-afr wideband kit. - $350

1 of the blocks - $200

Isuzu trans - $100

Thermal Reasearch 2 1/4 cat-back exhaust - $300

Stock sunfire wheels with Azenis RT-615 tires






Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Friday, July 02, 2010 10:05 PM
I can probably take the Springs if you still have them around bash time, I can get them from you there, Im not asking to hold them for me or anything, but if you get ready to go to the bash and have them around, id take them if I have some cash..

Did you use them? If so, any pics of the drop with them?


.
.

Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Saturday, July 03, 2010 1:30 AM
Karnage wrote:I can probably take the Springs if you still have them around bash time, I can get them from you there, Im not asking to hold them for me or anything, but if you get ready to go to the bash and have them around, id take them if I have some cash..

Did you use them? If so, any pics of the drop with them?



yes the springs are used, ill try and locate some pics i may have. they are a nice set of springs, not so rough like sportlines.







Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Tuesday, July 06, 2010 8:38 AM
even more goods added to the list plus some pictures for you lovely people


L61 goods

Vulcan Turbo log Manifold - offer

ARP head studs used for 200 miles - $75

440cc injectors and pre wired Eco injector harness - offer

Charge piping, couplers, XS Power intercooler, Bov - $300

Oil pan tapped for turbo - $40

Patriot valvetrain - offer

Eagle Forged Crank - offer

2 blocks, 1 is a complete engine and i will separate the head if wanted, non running. the other is a completely bare block with nothing in it. - make me some offers

Getrag trans - offer

SAAB turbo manifold - pending

oil pan - $40

4-2-1 Header + 2 1/4 Catalytic converter - $100 + your stock setup

interior wiring harness for a pre 2k Ecotec swap. - offer

gmpp supercharger kit, needs t/b adapter, belt, tensioner and a tune, i planned on hpt. its set up with the modified endplate - PENDING

LD9 goods

Log turbo manifold - $250

2.3 HO manifold - offer

HO cams, towers, lifters - $250

2.3 power steering setup

stock manifolds, throttle bodies, fuel rail - offer

2.4 cams, towers, lifters - offer



Audio

just give me offers on all this stuff.

Phoenix Gold ZX-500 Amp

2 10" Rockford Fosgate P1 Single Coil Subwoofers.

300-watt Jensen Amp

650-watt Jensen Amp

1 farad Audiobahn capacitor - $40

Random

17 inch Xtatik 5-twist wheels - $475

Precision 60 trim turbo 6031e need rebuild - offer

AEM Uego wideband used - $175

Tial style wastegate and dump tube - offer

Triple gauge pod pillar - $20

rk sport lowering springs - $150

Spearco Intercooler, i can get dimensions later - $200

95-99 main dash - $45

2k headlights - offer

95-99 headlights - offer

95-99 tail lights- $30

Z24 spoiler - $25

Red speckled door panels, slight cracking - offer

Red and black aftermarket steering wheel, brand new - $30 shipped





Pics!!


ARP ecotec head studs



Precision turbo





Oil pans



Triple gauge pod



Wastegate and dump



Vulcan turbo manifold



Intercooler piping, XS power intercooler



2.4 throttle bodies



Fuel rail



Xtatik wheels are the black with chrome lip ones





AEM Uego





Z24 spoiler













Re: FS: ECOtec forged goodies, motors, exhaust, rims, s/c kit. I need monies for the project =]
Wednesday, July 07, 2010 1:08 PM
what kind of cat and header for the eco? pics maybe?



This thread is locked.
For more information about why this thread might have been locked, please read the rules.

 

Start New Topic Advanced Search