Out torch in..........alot of greese lol
____________________________________
Primer Counts as Custom Paint Right?
BTW: This is my Sig.
anyone got the instructions from the 1's rsm used to sell ?
Cavalier2000 wrote:Out torch in..........alot of greese lol
yep. Torch, air hammer, chisel; it took a lot of patience in order to absolutely destroy the stock bushings while removing them.
but, i "machined" Delrin plastic (roadnoise is a downfall for this material) for the bushings, and used 304 SS for the sleeves and thrust washers; no binding, and a very improved feel/response from the chassis. Well worth the PITA!
TTR FTW!
List:
1. Dayton86
2. Cavalier2000
3. Misnblu
4. Cbevis
5. Darkstars
6. Blakd Eco
7. Zach
8. Matt Linke
9. Slick02eco
10. thaprowler
11. Rotten' Banana
12. MrR0b0t0
13. CavCrzy
14. Phil D
15. evans17
16. z yaaaa
17. Datwhitecavy
18. Kardain
19. FReQ Z
20. Luke H
21. OB
22. Mando
23. Adam Kappheim
24. Jason McElvy
25. Quicksilver41
26. s1lver_N1p
27.Bottom Feeder
no metal sleave?
____________________________________
Primer Counts as Custom Paint Right?
BTW: This is my Sig.
Uses factory sleeve? That would be a pretty good way to do it.....just burn the stocker out and pop in a new one...lol
lol that works
____________________________________
Primer Counts as Custom Paint Right?
BTW: This is my Sig.
the wizard wrote:the inner (towards center of the car) section of the sleeve for the bushing has a smaller i.d. (bushing o.d.) than the outer part (towards the wheel). to get a correct measurement i had to take the factory bushing out.
ok, i worded this wrong. the arm itself has the smaller id on the inner (towards center of car) part of it. once someone extracts one of the bushings/sleeves it will be more apparent what i'm trying to say.
ideally i think it would be two bushings (different inner and outer) with a common sleeve thru the center, like the frontmost bushings for the front control arms.
that makes sense
____________________________________
Primer Counts as Custom Paint Right?
BTW: This is my Sig.
god i wish rsm/z spec as a company was worth a sh!t... they acctually have made some pretty decent parts.
honestly, i dont see how you could better the ones pictured above ^^^ all except a good company backing them (TTR)
List:
1. Dayton86
2. Cavalier2000
3. Misnblu
4. Cbevis
5. Darkstars
6. Blakd Eco
7. Zach
8. Matt Linke
9. Slick02eco
10. thaprowler
11. Rotten' Banana
12. MrR0b0t0
13. CavCrzy
14. Phil D
15. evans17
16. z yaaaa
17. Datwhitecavy
18. Kardain
19. FReQ Z
20. Luke H
21. OB
22. Mando
23. Adam Kappheim
24. Jason McElvy
25. Quicksilver41
26. s1lver_N1p
27.Bottom Feeder
28. Mastin
Remember....syringes go in the RED waste basket.
Mastin you know your gonna get these them sell em LMAO...
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
You know me,
-M
Remember....syringes go in the RED waste basket.
When I'm under the rear of the car tomorrow, I'll have a better look at my rear trailing arms.
Oh and thanks Cavalier2000 for a heads up on this.
I'm certainly in on this, will hit the junkyards, and pick up an extra pair of arms for the replacement bushings. Then I just change out arms with the bushings already installed.
Misnblu.com
Newbie member since 1999
Thank you Dave and JBO!
List:
1. Dayton86
2. Cavalier2000
3. Misnblu
4. Cbevis
5. Darkstars
6. Blakd Eco
7. Zach
8. Matt Linke
9. Slick02eco
10. thaprowler
11. Rotten' Banana
12. MrR0b0t0
13. CavCrzy
14. Phil D
15. evans17
16. z yaaaa
17. Datwhitecavy
18. Kardain
19. FReQ Z
20. Luke H
21. OB
22. Mando
23. Adam Kappheim
24. Jason McElvy
25. Quicksilver41
26. s1lver_N1p
27.Bottom Feeder
28. Mastin
29. thebondoman
30. scorpio1
When these are done i'll have so many TTr prdoucts on, around, or wating to go in the car. Aaron and TTR rules!!
List:
1. Dayton86
2. Cavalier2000
3. Misnblu
4. Cbevis
5. Darkstars
6. Blakd Eco
7. Zach
8. Matt Linke
9. Slick02eco
10. thaprowler
11. Rotten' Banana
12. MrR0b0t0
13. CavCrzy
14. Phil D
15. evans17
16. z yaaaa
17. Datwhitecavy
18. Kardain
19. FReQ Z
20. Luke H
21. OB
22. Mando
23. Adam Kappheim
24. Jason McElvy
25. Quicksilver41
26. s1lver_N1p
27.Bottom Feeder
28. Mastin
29. thebondoman
30. scorpio1
31. Bubbaknoxz
I<3 TTR you guys are great
Under Construction
1. Dayton86
2. Cavalier2000
3. Misnblu
4. Cbevis
5. Darkstars
6. Blakd Eco
7. Zach
8. Matt Linke
9. Slick02eco
10. thaprowler
11. Rotten' Banana
12. MrR0b0t0
13. CavCrzy
14. Phil D
15. evans17
16. z yaaaa
17. Datwhitecavy
18. Kardain
19. FReQ Z
20. Luke H
21. OB
22. Mando
23. Adam Kappheim
24. Jason McElvy
25. Quicksilver41
26. s1lver_N1p
27.Bottom Feeder
28. Mastin
29. thebondoman
30. scorpio1
31. Bubbaknoxz
32. Josh Dearman
WHITECAVY wrote:Mastin you know your gonna get these them sell em LMAO...
Feel out of the chair laughing.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
1. Dayton86
2. Cavalier2000
3. Misnblu
4. Cbevis
5. Darkstars
6. Blakd Eco
7. Zach
8. Matt Linke
9. Slick02eco
10. thaprowler
11. Rotten' Banana
12. MrR0b0t0
13. CavCrzy
14. Phil D
15. evans17
16. z yaaaa
17. Datwhitecavy
18. Kardain
19. FReQ Z
20. Luke H
21. OB
22. Mando
23. Adam Kappheim
24. Jason McElvy
25. Quicksilver41
26. s1lver_N1p
27.Bottom Feeder
28. Mastin
29. thebondoman
30. scorpio1
31. Bubbaknoxz
32. Josh Dearman
33. Teh Jeffie
HELL YEA IM IN!!
SATCH PROGRESS THREAD!!!
In Loving Memory of Phil Martin December 14 2005
Alexis: Dustin, you're ghey, lol. I am better. I have tits, and tits rule all.
I thought I had added my name already, guess not...
1. Dayton86
2. Cavalier2000
3. Misnblu
4. Cbevis
5. Darkstars
6. Blakd Eco
7. Zach
8. Matt Linke
9. Slick02eco
10. thaprowler
11. Rotten' Banana
12. MrR0b0t0
13. CavCrzy
14. Phil D
15. evans17
16. z yaaaa
17. Datwhitecavy
18. Kardain
19. FReQ Z
20. Luke H
21. OB
22. Mando
23. Adam Kappheim
24. Jason McElvy
25. Quicksilver41
26. s1lver_N1p
27.Bottom Feeder
28. Mastin
29. thebondoman
30. scorpio1
31. Bubbaknoxz
32. Josh Dearman
33. Teh Jeffie
34. OHV notec
*note: the more they squeak the better
fortune cookie say: better a delay than a disaster
34 people so far. Awesome
____________________________________
Primer Counts as Custom Paint Right?
BTW: This is my Sig.
If they're not too much of a pain to install, I'd be up for some too.