I have to bleed my clutch about every second day for me to be able to drive my car. I know it's leaking a little, but it's mostly just loosing pressure. When I am under the car sometimes I can find a drip or two of clutch fluid, but sometimes none. Either way, I lose pressure in my clutch pedal, and have to try and rev match to shift. My clutch feels great after I bleed it, and the friction disk isn't slipping at any speed.
I was wondering if this was my slave cylinder that was leaking, or I have read a few posts about leaking lines. What could cause this? Also, if it is the slave cylinder, is that something that I have to drop the tranny for?
Where exactly under the car are you getting leaking from?
Also forgot to mention that it shifts great once it's bled, shifts great when the car is off. So it's not a linkage problem. Also forgot to mention it's a 95 2.2
sounds like it is the slave cylinder
2004 Cavalier, 2.2 ecotec, 5spd getrag
do you ever notice that the ones who talk the loudest have the least to talk about?
check the master cylinder as well.
When I see a leak it is just a little drip off the bottom of the bell houseing. But it also looks like the whole hose under my reservoir is damp.