62mm of FUN - Page 4 - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: 62mm of FUN
Saturday, March 02, 2013 4:40 PM
Truthfully, I don't think you've placed your V/C fittings very well. You should have drilled into the vent lines (there are 5, 3 at the front and 2 in the rear) of the valve cover. They are the factory crankcase evac ports that go directly down to the crankcase itself.

You won't be pulling the crankcase pressure that needs to be pulled out. You'll just be vacuuming oil out of the head.




Re: 62mm of FUN
Saturday, March 02, 2013 5:54 PM
I only hit around 10psi afr were 11 only did a short pull to see where tune was


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: 62mm of FUN
Sunday, March 03, 2013 7:59 AM
Jeff Wybrow wrote:

Truthfully, I don't think you've placed your V/C fittings very well. You should have drilled into the vent lines (there are 5, 3 at the front and 2 in the rear) of the valve cover. They are the factory crankcase evac ports that go directly down to the crankcase itself.

You won't be pulling the crankcase pressure that needs to be pulled out. You'll just be vacuuming oil out of the head.


to be honest i had those put on when i didnt know much about this stuff i plan on getting a dif vc and redoing it anyways thanks for bringing it up


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: 62mm of FUN
Sunday, March 03, 2013 9:10 AM
WOW that bish is so sick bro.. Congrats on getting it running and Im defanetly in for more vids..Great Job!!
Re: 62mm of FUN
Sunday, March 03, 2013 2:09 PM


Walkaround video from today keep in mind that this is 6k rev limiter 15psi springs, old POS intake manifold since new one is getting planed, no intercooler hooked up do to needing to order a 3" coupler, still working on base tune hoping by end of week i get it on the dyno Idk if I'm gonna go for a all out tune or just do a 20ish (prolly 450ish) psi tune for now and then go back in a month or so for a 30-35 psi tune hoping to net around 600-650 on C16.


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: 62mm of FUN
Sunday, March 03, 2013 3:45 PM
Thing sounds bad ass when get it reved right out


FuzzMASTA9
Re: 62mm of FUN
Sunday, March 03, 2013 3:51 PM
That sound makes me happy in my pants.



Re: 62mm of FUN
Sunday, March 03, 2013 4:02 PM
Winner winner chicken dinner. That sound bad ass idling.

Id read back but what cams are you running in that? sounds pretty mild for sure.

Is that the PJ LSJ coil on plug swap? We need to get in on the PJ shifter as well. Looks like you have a stock on in your car now?

You better have a 2 step on the car.

Love the gauge setup too. Nice and clean. At first I saw the FMIC not hooked up and did a wtf until I read and saw it piped right off the turbo.

I vote you get it nice and reliable tuned and see how it feels there. get used to it for a while then up it rather enjoy it for a little while than risk blowing it up right away!



Re: 62mm of FUN
Sunday, March 03, 2013 4:15 PM
Coils aren't pj swap right now they are firing in waste spark until I hook up cam sensor then it will be firing them in full sequential zzp turbo grind cams and yes it has a 2step on it ill dial the two step in at the track


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: 62mm of FUN
Sunday, March 03, 2013 4:22 PM
I gotcha. Def sounds mild at idle. Cant wait to hear 2 step spool and watch it launch. Now you will have to battle traction!



Re: 62mm of FUN
Sunday, March 03, 2013 4:44 PM


Traction sucks


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)

Re: 62mm of FUN
Sunday, March 03, 2013 5:29 PM
My envy just went to full on jealousy. I'm still in love with the exhaust port on the hood.


"In Oldskool we trust"
Re: 62mm of FUN
Sunday, March 03, 2013 6:15 PM
Sick
Re: 62mm of FUN
Monday, March 04, 2013 4:29 PM
Definitely excited to see what kind of numbers this bad boy puts down.



Re: 62mm of FUN
Tuesday, March 05, 2013 6:29 PM
^^^ Same here bro!!
Re: 62mm of FUN
Tuesday, March 05, 2013 9:36 PM
Well intake mani should be done tomorrow just ordered everything for my crankcase vent setup should work out good hopefully. had to get a new valve cover due to previous one having a huge oil leak from where I had a bung welded on and it warped. So as soon as I receive that from mongo I should be done building catch can and be ready for the dyno


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: 62mm of FUN
Wednesday, March 06, 2013 3:38 AM
Do you have a bolt in upper rad support or you running it without like it is in the video? I sure hope you do have one. That thing will twist like a pretzel with that kind of power and no rad support.



Re: 62mm of FUN
Wednesday, March 06, 2013 5:42 AM
It will have one just waiting to finish it


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: 62mm of FUN
Wednesday, March 06, 2013 8:25 AM
I thought for SURE your camera was going to get sucked into the turbo when you revved it.

-Chris-



-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...
Re: 62mm of FUN
Wednesday, March 06, 2013 10:19 AM
Just curious..You gonna be color matching the intake manni to the turbo? Car is gonna be so crazy bro..
Re: 62mm of FUN
Wednesday, March 06, 2013 6:59 PM
OMFG that rev was insane.



It's nice to be injected but I love being blown.

Re: 62mm of FUN
Thursday, March 07, 2013 10:02 AM
-Z Yaaaa- wrote:

OMFG that rev was insane.


THIS



Re: 62mm of FUN
Thursday, March 28, 2013 1:34 PM
any updates here miller?



Re: 62mm of FUN
Thursday, March 28, 2013 2:09 PM
jason norwood wrote:

any updates here miller?

Beat me to it! Was coming on to ask the same thing.



"In Oldskool we trust"
Re: 62mm of FUN
Thursday, March 28, 2013 2:57 PM
Kinda lol I will say that the car did make it to the dyno and got some tuning done and the car left under its own power


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search