Blwn LD9 build thread - Page 2 - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Blwn LD9 build thread
Tuesday, April 26, 2011 10:37 AM
nice! no finish welds?

for that line... just ditch it and use a burp screw off like a V6.




Re: Blwn LD9 build thread
Tuesday, April 26, 2011 2:51 PM
I am also looking for ideas with that coolant line.. So far I cut my bracket off but no clue how to route it safely.. Might heat wrap it and tuck it away as best as possible.

Let me know if you figure something out!





BeardLife / Club Awesome Reject Blog
Re: Blwn LD9 build thread
Tuesday, April 26, 2011 3:46 PM
Qwik2k2z24 wrote:I am also looking for ideas with that coolant line.. So far I cut my bracket off but no clue how to route it safely.. Might heat wrap it and tuck it away as best as possible.

Let me know if you figure something out!


i cut it off, added a compression fitting and routed it underneath my ho manifold




Re: Blwn LD9 build thread
Wednesday, April 27, 2011 9:12 AM
I cut mine off almost in half, then slide an SS hose on that bitch with a couple of clamps. Clean looking. But mine is still in the same stock location. You will have to cut it more towards the drivers side then put an SS hose on it if you need flexibility for room with your manifold.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Blwn LD9 build thread
Wednesday, April 27, 2011 12:28 PM
z yaaaa wrote:nice! no finish welds?

for that line... just ditch it and use a burp screw off like a V6.


Yep..no finish welds. I bought it from an org member who did not finish the project. In a way I am glad it is not finished, because it is for an Ecotec and it will need some changes made to it to fit my LD9

As far as the coolant line....the final position of the header will dictate what I am going to do. Right now I am thinking about replacing the fitting in the head with an NPT to AN fitting, then I can run braided line where ever




Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: Blwn LD9 build thread
Wednesday, April 27, 2011 1:13 PM
Jason,

I asked my buddy at work to find out about having his son weld the header up for you. Stay tuned.

Dan




Currently on jackstands.

Project updates and stuff: www.clubhousecustoms.com
email: dan at clubhousecustoms dot com
Re: Blwn LD9 build thread
Wednesday, April 27, 2011 3:22 PM
WHITECAVY wrote:I cut mine off almost in half, then slide an SS hose on that bitch with a couple of clamps. Clean looking. But mine is still in the same stock location. You will have to cut it more towards the drivers side then put an SS hose on it if you need flexibility for room with your manifold.


I shall do this route to save time. Thanks!





BeardLife / Club Awesome Reject Blog
Re: Blwn LD9 build thread
Thursday, April 28, 2011 1:57 PM
juicedz4 wrote:Jason,

I asked my buddy at work to find out about having his son weld the header up for you. Stay tuned.

Dan


Thanks Dan




Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: Blwn LD9 build thread
Friday, June 10, 2011 6:52 PM
small update.

The turbo header would not work for me. The turbo was resting on the water pump, so I listed it for sale in the classifieds

Hybrid Ti retainers arrived on Weds. ( Thanks Clyde ) As soon as I can pickup a valve spring removal tool, I will swap out the Mantapart springs for a set of Rocketparts HD springs.




Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: Blwn LD9 build thread
Sunday, August 14, 2011 2:07 AM
Sold the header and going with a log manifold instead




Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: Blwn LD9 build thread
Sunday, August 14, 2011 2:08 AM
It has been a while for updates so here are a few

I picked up my Grand Am control arms and timing chain cover from paint. Control arm bushings are from Karo ( a long time ago, LOL!! )





I finally got around to hanging my stock hood, so I can have room to take the Evo hood off



Also pickup up this timing chain housing from IceMike






Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren

Re: Blwn LD9 build thread
Sunday, August 14, 2011 5:35 AM
I approve, about time you updated this lol










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Blwn LD9 build thread
Sunday, August 14, 2011 10:01 AM
Watching lol


"Hondas are like tampons, every pussy has one!!!"
Re: Blwn LD9 build thread
Sunday, August 14, 2011 10:22 AM
Love the color man! Glad to see the cover being used, just be careful if you swap out the fitting thats very soft alum was a bitch to tap but I used a decent amount of teflon paste since the metal is very pourus.



Re: Blwn LD9 build thread
Sunday, August 14, 2011 11:16 AM
is that cayenne red? looks great, man!

cant wait to see this beast complete. like fine wine... it will be best aged!



Re: Blwn LD9 build thread
Sunday, August 14, 2011 3:39 PM
Why is it not running yet?



Re: Blwn LD9 build thread
Monday, August 15, 2011 3:44 AM
mitdr774 wrote:Why is it not running yet?





lol




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Blwn LD9 build thread
Monday, August 15, 2011 3:47 AM
-MD- Enforcer wrote:
mitdr774 wrote:Why is it not running yet?





lol


is yours?? hahaha
Re: Blwn LD9 build thread
Monday, August 15, 2011 7:34 PM
ohhh OHHHHHHHH, .............touche!!!!!







Re: Blwn LD9 build thread
Monday, August 15, 2011 7:50 PM
Lets see those colors!!!



Re: Blwn LD9 build thread
Tuesday, August 16, 2011 2:28 AM
the_miker17(u kiddin) wrote:
-MD- Enforcer wrote:
mitdr774 wrote:Why is it not running yet?





lol


is yours?? hahaha


Both of my LD9s run just fine....

My Q4 has been put on hold since it still needs many more parts and currently keeping a roof over my head and the utilities on trumps the need to build an engine.




Re: Blwn LD9 build thread
Tuesday, August 16, 2011 3:29 AM
Clyde, I believe he was harassing me not you lol.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Blwn LD9 build thread
Tuesday, August 16, 2011 3:55 AM
-MD- Enforcer wrote:Clyde, I believe he was harassing me not you lol.


indeed i was
Re: Blwn LD9 build thread
Friday, August 19, 2011 6:46 AM
-Z Yaaaa- wrote:is that cayenne red? looks great, man!

cant wait to see this beast complete. like fine wine... it will be best aged!


Yep, that is Cayenne Red. Right now ( always subject to change ), the cam towers will be powder coated chrome, intake manifold and coolant will be polished, upper engine mount, strut tower plates and any other bracket I can find will be gold or bronze

While the engine is out I will also be doing a F23 Getrag swap with OBX LSD. I have the tranny and most of the parts except for the clutch master cylinder. I am not sure I can use the Isuzu one with the Getrag






Jason
99 Z24

LG0/LD9 for Life
10 Year Bash Veteren
Re: Blwn LD9 build thread
Friday, August 19, 2011 6:58 AM
keep doing work man. gonna be a good solid runner once its complete.



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search