Jbodyperformance PCM Reflash - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Jbodyperformance PCM Reflash
Tuesday, September 20, 2005 9:56 AM
Is there anyone here that is using the JBP reflash, I called them yesterday and I was told that I would be able to use the 2-bar MAP sensor. Just want some feedback on it since I'm thinking of getting it.





Re: Jbodyperformance PCM Reflash
Tuesday, September 20, 2005 1:40 PM
i talked with them a bit through email and they seemed to be able to handle many of the things i was planning to do with my car. much more than just boost tuning. they seemed very capable! too bad i may not be able to do business with them since the cav is gone.

also i would go get a spare PCM and have it reflashed to your spec at a dealership before sending it to them. i say that only because you wont be abe to drive otherwise till it returns.



Sven you totally quarterloafed your computer..
Re: Jbodyperformance PCM Reflash
Tuesday, September 20, 2005 2:48 PM
I've got a second PCM ready to go



Re: Jbodyperformance PCM Reflash
Tuesday, September 20, 2005 11:27 PM
Hey Mike,

If you don't mind me askin, where did you get your spare PCM? I'm tryin to do the same with JBP, it was too expensive getting the extra PCM from them.
Re: Jbodyperformance PCM Reflash
Wednesday, September 21, 2005 4:25 AM
I got it at the junkyard




Re: Jbodyperformance PCM Reflash
Wednesday, September 21, 2005 4:59 PM
whats the reflash all about ??? for a turbo app ?????
I have the RSM reflash right now that sucks ass... I want a new flash.....
They do them ???? I live 20 minutes from JBP............SWEEETTTTT !!!!!


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: Jbodyperformance PCM Reflash
Tuesday, January 10, 2006 8:45 PM
bump for more info on this sizubject



Re: Jbodyperformance PCM Reflash
Wednesday, January 11, 2006 3:50 PM
excuse me bumpidty bizzle bump bump



Re: Jbodyperformance PCM Reflash
Wednesday, January 11, 2006 4:30 PM
This question has been asked over and over and over.

Nobody anywhere ever replies that has actually had their PCM reflashed by JBP.


sig not found
Re: Jbodyperformance PCM Reflash
Wednesday, January 11, 2006 5:12 PM
i been waiting around for 6 months and still got no info.






Re: Jbodyperformance PCM Reflash
Wednesday, January 11, 2006 6:38 PM
same here




Jason
99 Z24

Racers Edge
Johnny Mack Turbo Systems
Engineered Performance

Re: Jbodyperformance PCM Reflash
Wednesday, January 11, 2006 7:27 PM
protomec wrote:

This question has been asked over and over and over.

Nobody anywhere ever replies that has actually had their PCM reflashed by JBP.


Interesting complex we have here....so are the ones that have the reflash so happy with the results that they said screw the JBO and are out driving their cars 24/7? Or is it that they are so upset with it that they have ended themselves completely....

man I'm bored.



Re: Jbodyperformance PCM Reflash
Wednesday, January 11, 2006 8:11 PM
it's probly just as worthless as the rsm reflash



LE61T PTE6262 Powered

Re: Jbodyperformance PCM Reflash
Thursday, January 12, 2006 1:27 PM
hahaha ^




Re: Jbodyperformance PCM Reflash
Thursday, January 12, 2006 1:49 PM
protomec wrote:

This question has been asked over and over and over.

Nobody anywhere ever replies that has actually had their PCM reflashed by JBP.


And nobody ever will.


- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.

Re: Jbodyperformance PCM Reflash
Thursday, January 12, 2006 2:23 PM
wretched case of bad marketting..

IF this actually worked as well as the GM flash for 00+ cars they would instantly sell 50+ of these. BUT.. no one knows they work because they never stated any examples or happy customers or anything.



Sven you totally quarterloafed your computer..
Re: Jbodyperformance PCM Reflash
Saturday, January 14, 2006 12:43 PM
QBE (73H 800573D 0N3) wrote:

it's probly just as worthless as the rsm reflash

Jake wrote:

hahaha ^


HAHAHAHHAHA ^^^^^^^^^^^^^^^^^^^^^^^^

Lee


JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
Re: Jbodyperformance PCM Reflash
Saturday, January 14, 2006 1:08 PM
I spoke with Mev from Jbodyperformance on the the phone at length yesterday, and got the low-down as to what he can do with the PCM and what he can't do.

Delete the EGR? Yes. Raise the limiters? Yes. Change just about anything? Yes.

Hope that answers your questions. For the money it's actually not a bad deal at all for what can be tuned and how he tunes it.

-Chris-



-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...
Re: Jbodyperformance PCM Reflash
Saturday, January 14, 2006 2:41 PM
That is well and good but talk is cheap. We want to here from someone that actually had their computer reflashed. I remember when JBP first announced they were going to do this, someone had theirs done. No word from that person




Jason
99 Z24

Racers Edge
Johnny Mack Turbo Systems
Engineered Performance
Re: Jbodyperformance PCM Reflash
Saturday, January 14, 2006 2:44 PM
Should have searched first. Found the thread
http://www.j-body.org/forums/read.php?f=40&i=70426&t=70426#70426

Kueterized,

DId you ever get the reflash???




Jason
99 Z24

Racers Edge
Johnny Mack Turbo Systems
Engineered Performance
Re: Jbodyperformance PCM Reflash
Saturday, January 14, 2006 6:20 PM
Jason ( got boost?? ) wrote:

That is well and good but talk is cheap. We want to here from someone that actually had their computer reflashed. I remember when JBP first announced they were going to do this, someone had theirs done. No word from that person


Clearly if I have phoned Mev and I have given you info, I am more than likely considering going ahead with this option. I know mev, and he's a good guy not a rip-off artist... the first thing I'm going to do when I get the car back is rev it to 7200 rpm's to ensure there is indeed a reflash in the car.

With that all said, the computer will be reflashed to my specs on the dyno and the car will be fully tuned. He CANNOT make the PCM read boost - he has the ability but he hasn't done it yet and currently doesn't have the time to sit down and make it happen, so he was upfront with me and told me the best he could do was dynotune the car for me to the power levels I wanted and improve the fuel and timing maps as well as bump all the limiters and basically make the car run as well as possible without a standalone.

He is also going to make the car idle 550cc injectors no problem.

I will be talking with him in person next week, this isn't a "cheap" alternative but definitely cheaper than a standalone.

-Chris-



-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...

Re: Jbodyperformance PCM Reflash
Monday, January 16, 2006 12:24 AM
when i had my car and was gonna do the HO swap we had an email dialog about stuff and realized while staying n/a he could set me up on the 97 ecu and harness. was gonna be a good swap..

like i said, i have faith he can do what he says but never got the chance to test it.. and havent heard from anyone about it.



Sven you totally quarterloafed your computer..
Re: Jbodyperformance PCM Reflash
Monday, January 16, 2006 12:27 AM
if he can raise the redline for cheap.. and put a good n/a map setup... this combined with a good eic and msd box for timing, that wouldnt be a bad setup at all..



Sven you totally quarterloafed your computer..
Re: Jbodyperformance PCM Reflash
Monday, January 16, 2006 6:37 AM
Chris,

It is good that you have established a dialog and that you feel comfortable with JBP. What I am looking forward to is your ( or anyone elses ) report back after having the ECU reflash that it indeed works.

Like Jrob said, I am just looking for the rev limit increased and a good N/A map






Jason
99 Z24

Racers Edge
Johnny Mack Turbo Systems
Engineered Performance
Re: Jbodyperformance PCM Reflash
Monday, January 16, 2006 8:30 AM
well let's hope thihns work



LE61T PTE6262 Powered

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search