For awhile now my windshield washer fluid pressure is weak and has gotten to the point that I can only clean a small section on the driver side. I figure it is one of two things, either a clog in tubing or the pump. Either way I need to get to the pump and the Haynes manual makes no mention of the pump, how to find it or how to remove it. I can see that the reservoir is on the front drivers side are of the motor, but I cannot see how to get to it from above or below. Anyone got some good instructions or pictures and how to get to it so I can check it.
remove your intake tube... have a flash light handy..look right below the battery tray. you will see it right on the fluid bottle on top.
