OK so I have the bigger tb off a older modle grand am . What all do I need to buy to install this. Any type of gaskets. I know I need a t-coupler for one of the hoses. But what size do I need. I woudl liek to get this done this weekend since im only home ofr 2 weeks' Thanks and if your from chi-town area or near let me know if you wnat to join me and a few other org members in the install and the drinking after wards and during.
Disclaimer:
Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.
i posted a how to post on this exact same thing .. all u need is a t or f fitting for the hose . everything else bolts right up . except u only use 2 bolts to bolt the throttlebody on instead of 4 like the stock one .
the size i used was 3/16 and i notice some power gains and gas milage .. all around i love it . it justr idles at 1100 instead of 600 . but i got use to that in bout 2 days . very easy install i say go for it .
man i hope mine wont go crazy if i put one on, mine idles around 1300 right now. Just hope it dont idle higher with the 2.3TB on
nah it shouldn't ... mine never goes above 1100 . i'm goin to the track tonight and see what i run . i hope i can break into the 15's or low 16's .
i'm sayin mid 16's to high 16's. No way your getting into the 15's with what's in ur registry.
ll thats fine wit me ... i have a spare head i'm building up right now so i want to get a before and after track pull u know .. i'll tell yall tommorow what i ran . as long as i am in the 16;s i will be happy
i also stripped the whole rear of my car . no spare no jack no carpet no back seat and no insulation undere the rear seats . no stereo either . i hope i run a good time for a 2200 4 speed.
and you are owned if you have a flat
nahh we do it like ok one of the guys in the club has everything in his truck .. spares an da 2ton jack . hes gonna have 5 sapres one for each car pretty much . so if i get a flat i wil just change the tire out . no big deal .
