As title says, what's a good website to order just exhaust flanges from? I want to get a catalytic converter back on my car, and it would fit perfectly in the section of pipe that my DC Sports 4-2-1 Race header came with that eliminates the converter, but that pipe is only 2"OD, and I want to keep ALL the piping and the new converter 2.25"OD without having to weld up a bunch of reducers to adapt the pipe sizes. Another reason I want to be able to buy flanges w/ a small amount of pipe already on them is so I can do 3 different setups that are all swappable by just doing bolts:

1 - 2.25"OD, no converter, no O2 bung (o2 sim)
2 - 2.25"OD pipe w/ 2.25" w/ Converter
3 - 2.25"OD pipe w/ DMH Electric Cutout.

Being able to get ahold of flanges w/ little starter pipes would allow me to easily fab up those 3 different setups and swap them out whenever I want without cutting and rewelding. Plus, I haven't used my welder in almost a year now, and it'll be good pracitce in getting me back up to speed. Practice makes perfect.

Here's a pic of roughly what I'm wanting. (And please don't say "Um... if you found a pic of it, you could buy it there." because they don't have the size and flange styles I need.)


That's exactly what I need, only in 2.25", and I need the 2-bolt AND 3-bolt styles.

Did you try eBay? I've found all sorts of hard to find parts there.

This might help ya.........
http://store.summitracing.com/partdetail.asp?autofilter=1&part=HED%2D18802&N=400143+305266+115&autoview=sku


REVIN' ECOTEC 2.2L

REVECO wrote:This might help ya.........
http://store.summitracing.com/partdetail.asp?autofilter=1∂=HED%2D18802&N=400143+305266+115&autoview=sku

Wow... I must have spent an hour searching through Summit, Jeg's, and JCWhitney and still managed to not find that. God I'm lame.

That'll do the trick just fine, and for pretty low cost. Thanks a lot!

i might be working on making custom exhuast flanges for the 2.2,2200,2.4's pretty soon


Opening Soon Kustom J's

You're welcome...always glad to help a brother out....
alright ......I'm out.....Ruben


REVIN' ECOTEC 2.2L

Kustom 96 Sunfire GT wrote:i might be working on making custom exhuast flanges for the 2.2,2200,2.4's pretty soon

Interesting. Flanges as in 2 and 3-bolt flanges for exhaust piping, as in manifold flanges, or as in turbo flanges?

LD9 Fury (The JBO Viking) wrote:

REVECO wrote:This might help ya.........
http://store.summitracing.com/partdetail.asp?autofilter=1∂=HED%2D18802&N=400143+305266+115&autoview=sku

Wow... I must have spent an hour searching through Summit, Jeg's, and JCWhitney and still managed to not find that. God I'm lame.

That'll do the trick just fine, and for pretty low cost. Thanks a lot!

I tried to search but couldn't find what you were looking for. Just got the extensions in that link today. Can't go wrong with summit.

Go to www.lsdmotorsports.com and give that number a call, they can get you anything under the sun. Me and my buddy just got all kinds of pipes, flanges, flexpipe, everything. Ask for mike and tell him Sean from Boosted Performance told you to call.



2007 GM Tuner Bash...HELL YEA
PA,MD,NJ,DE,NY and all states north caravan

manfold flanges and turbo flanges and also probly making headers 2


Opening Soon Kustom J's

Here's a pretty good find:

Verocious Motorsports, verociousmotorsports.com
They've got 2- and 3-bolt flanges sizes 2" to 3", laser-cut 304 Stainless, 3/8" thick. Also gaskets to match each flange, composite graphite w/ steel core.

3 and 5-bolt T3 turbo discharge flanges as well as 2 types of 4-bolt inlet flanges, all 1/2" thick.

Got some other stuff too like hangars, straight piping, mandrel bent piping, threaded O2 bungs, etc.

Here's a pretty good find:

Verocious Motorsports, verociousmotorsports.com
They've got 2- and 3-bolt flanges sizes 2" to 3", laser-cut 304 Stainless, 3/8" thick. Also gaskets to match each flange, composite graphite w/ steel core.

3 and 5-bolt T3 turbo discharge flanges as well as 2 types of 4-bolt inlet flanges, all 1/2" thick.

Got some other stuff too like hangars, straight piping, mandrel bent piping, threaded O2 bungs, etc.

Thanks for posting that link to Verocious Motorsports... I'm needing a flange as well as a flex pipe

Yay, more exhaust parts

Bah... lousy UPS shipping... n/m, they don't get my business

Try your local Advance Auto or parts store. I picked mine up from Advanced Auto




Jason
99 Z24

Racers Edge
Johnny Mack Turbo Systems
Engineered Performance