I'm looking for some new injectors as cheap as possible. They need to be 52 to 60 lb/hr, high resistance (12 ohm), standard height or taller, preferably with Bosch style connectors although I can rewire if the new connectors don't cost that much. I've found some for around $50 each, but at 6 cylinders that's getting a bit rich for my budget at the moment. Any ideas?
Can you break that into CCs for me? I'm horrible with lb/hr.
I dont know what they are for but do you really want to go cheap on something like injectors? not trying to make it sound bad at all but do you mean cheap as in cheaper red tops, brown tops, green tops, or just some cheap injectors to put in the car to make it run.
ln2johnny wrote:Can you break that into CCs for me? I'm horrible with lb/hr.
lbs/hr x 10.5 = cc/min
fortune cookie say:
better a delay than a disaster.
In that case, let's say he needs 550-600cc injectors. I MIGHT be able to get him some 550s. We had some EVO RS injectors in the shop but I can't remember if anyone picked them up during the last meet. We always have extra parts for the taking. I'll look around this week if I have a chance.
Wait, I just realized he needs 6 of em. That might take some time to find. Four would be much easier lol.
ln2johnny wrote:Wait, I just realized he needs 6 of em. That might take some time to find. Four would be much easier lol.
He also said he needed high impedence, EVOs are low,
fortune cookie say:
better a delay than a disaster.
Vincent Morris wrote:I dont know what they are for but do you really want to go cheap on something like injectors? not trying to make it sound bad at all but do you mean cheap as in cheaper red tops, brown tops, green tops, or just some cheap injectors to put in the car to make it run.
Yeah, I have found no-name ones for less than $50 each, but I wouldn't trust them. The ones I found for $50 are Siemen's Deka 3172.
Definitely need 6 of them. If you find anything at a decent price let me know. It's something that can wait a month or two to find a deal.
OHV notec wrote:ln2johnny wrote:Wait, I just realized he needs 6 of em. That might take some time to find. Four would be much easier lol.
He also said he needed high impedence, EVOs are low,
Well then I can't help him lol. If he needed high impedence, I could track some down.
Do you currently have injectors that you are wanting to replace? Cause you can get them cleaned and flow tested for around $15 apiece. I just sent my truck ones to
WitchhunterPerformance and they came back spraying like new in less than a week.
If you don't currently have injectors that you can get cleaned then disregard this post.
Rob
Sold 2/2/05
Stock injectors are 34 lb/hr. No amount of cleaning will get them up to 52 lb/hr minimum.
ln2johnny wrote:Well then I can't help him lol. If he needed high impedence, I could track some down.
Yeah I need HIGH, the EVOs you had laying around should be low.
I sent an e-mail to Deatschwerks, have to see what they say.
I get that. I'm saying I could try to track some down. The EVO injectors are from an EVO I, which is the first gen 4G63, but I can't remember if they're hihgh or low off the top of my head. But if they won't work, so be it. Too bad - I actually found seven of them in our parts bins. But we've got some guys in the club that could point us in the right direction I'm sure. Unless you could figure out how to make the switch to low impedence if that's what these are.
I'll ask some of my buddies, maybe they can help.
So it just hit me after I posted. They're low impedance, yeah so they won't work, sorry.
But I thought of another option. 88-91 RX-7 turbo injectors are high impedance, 550cc. If you do some searching you might be able to find a good deal on some. Also the Toyota 2JZGTE engines I believe use 550cc, I know they're high impedance.
You can also try here:
http://www.fiveomotorsport.com/Injector_SetsMODS.asp#siemens
They have injectors in sets of six for from $370-380 for 55# and 60#.
I bought a set of 4 injectors from here for under 125.00 shipped.
http://www.injectors4u.com/
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
i could use those injectors...if u still have them pm me
you scratch my ride IMA EAT YO CHILDREN
im talking to ln2johnny
you scratch my ride IMA EAT YO CHILDREN
Johnny: Thank you, I appreciate the effort. I actually found the 3172 specs originally on five-O. I've found 3172's for $49; MSRP is only $65 (or thereabouts) so five-O is only a few dollars cheaper.
I'll check out those other sites. Thanks all!
