i was just wondering if the 2.3l h.o. throttle body was able to be swapped on to the 2.2l ohv i see everybody's doing the swap but was wondering if it was from the h.o. or the sohc and suggestions will be appreciated. thanks
hondas are like tampons.....every pu$$y needs one...
mildly built 99' ln2, eagle h-beam rods, wiseco forged alum. pistons, cusco oil catch, t3/t4 super 60 garret, tial 40 mm wastegate, hp tuners, prothane mount inserts, 2.5" exhaust.
i have the 2.3 tb. it definitly fit ln my ohv.
it willl fit 98 and up 2200's not the 95-97 ohv
yes
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
what cars do u get the 2.3l h.o. tb from
i believe aany 90-93 2.3l..phil
90-95 quad 4's. Doesn't have to be a HO either. They are all the same (with the exception of whether or not you want cruise control).
-
"Youth in Asia"...I don't see anything wrong with that.
The 56mm TB fit right onto my 2200, only I had to get creative with the throttle cable, as I didnt rotate the throttle wheel to match the 2200 TB. I STILL need to figure that out 100%, Ive broken 2 throttle cables as of now.
well i figured it all out it fits great just with only two bolts "no leaks" i took the old throttle cable off the 2.2l and swapped it into the h.o. and dremel it a little bit i had to shave down the wheel and put a few landing marks in the bottom by the stopper but it looks like it all came stock like that it looks very good and it was very simple to do. if anybody needs pics let me know ill get them.
hondas are like tampons.....every pu$$y needs one...
mildly built 99' ln2, eagle h-beam rods, wiseco forged alum. pistons, cusco oil catch, t3/t4 super 60 garret, tial 40 mm wastegate, hp tuners, prothane mount inserts, 2.5" exhaust.
Some pics please? I am thinking of putting a Quad4 TB on my 2k 2200.
sure will, but im heading to work right now i get home around 7:30 or 8 so ill post you some pics then.
hondas are like tampons.....every pu$$y needs one...
mildly built 99' ln2, eagle h-beam rods, wiseco forged alum. pistons, cusco oil catch, t3/t4 super 60 garret, tial 40 mm wastegate, hp tuners, prothane mount inserts, 2.5" exhaust.
i have the 97 2.2l. what options do i have with throttle bodies and intakes?
personally i like the way yours is set up its not restrictive and it has short runners unlike the 98 and up model we have plastic intakes and it seems very restrictive, but yea your best bet is to keep yours the way it is being that your intake is actually not that bad. but if you really are looking to do somthing to gain more air-flow than get a spare intake and throttle body and take it to a machine shop or do it yourself, but you can also ask madjack he has the same motor and he could probably lead you in the right direction.
hondas are like tampons.....every pu$$y needs one...
mildly built 99' ln2, eagle h-beam rods, wiseco forged alum. pistons, cusco oil catch, t3/t4 super 60 garret, tial 40 mm wastegate, hp tuners, prothane mount inserts, 2.5" exhaust.
so any 90-95 quad 4? that includes SOHC as well?...man if only i knew.. i had discarded one not too long ago from a 92 grand am sohc with a LO intake manifold....boo...
yea basically all the 2.3l t.b.'s are the same you just have to customize it to fit a bit, i had to reuse the old ohv throttle wheel and grind it down some to make it seal right but yea it fits pretty damn good. i will post pics soon as my bitch sister gives me the camera back!!!
hondas are like tampons.....every pu$$y needs one...
mildly built 99' ln2, eagle h-beam rods, wiseco forged alum. pistons, cusco oil catch, t3/t4 super 60 garret, tial 40 mm wastegate, hp tuners, prothane mount inserts, 2.5" exhaust.
WERE I CAN BUY A BIG THROTTLE BODIE FOR A 2.4L SUNFIRE ENGINE?
you can do the 2.3l intake manifold and throttle body swap from a grand am it'll gain you more air-flow than your stock intake and throttle body!!!!!
hondas are like tampons.....every pu$$y needs one...
mildly built 99' ln2, eagle h-beam rods, wiseco forged alum. pistons, cusco oil catch, t3/t4 super 60 garret, tial 40 mm wastegate, hp tuners, prothane mount inserts, 2.5" exhaust.
I have an option to buy a used 56mm tb and cold air intake for $90. I just hope I can get it all to work.
