Im looking for a cold / warm air intake for a 95' Sunfire GT and cant seem to find one, is there any out there? Or am I out of luck? If so what are my options?

Thx





1999 Pontiac Sunfire GT
CavFire Is Coming Spring 08'
Need a Design? Then look no further... http://dadesign.tk

You'll have to make your own.
Most just install a cone filter to the end of their S-tube while removing the rest of the intake system that came from the factory.
If you look around for some of the members that have done the high output manifold swap, you'll get some ideas of what you can do to make your own.
Do a search using "h.o. manifold swap" and go from there.

Good luck.



Misnblu.com
Newbie member since 1999
Thank you Dave and JBO!

you could do what i did...i went to auto zone and picked up a civic intake..its shaped like a " j " its 3" in diameter and is aluminum and pretty cheap..even comes with a filter...youll just want to cut a bit of it off..just put the filter on the curved part and place it behind your battery..then line up the straight part of the pipe with the edge of the throttle body opening..cut it there..then use the 90* elbow that comes with it and strap'er on .. thats how i did mine..cost me like 30 bucks