Sooo....
.....since were all getting into the modding season... we were shooting the @!#$ at the shop the other day and thought we would see if there was a great enough interest in running these for you fellas/ ladies. We've never ran one before so we are looking to do our part for the car enthusiast community and run our first on here for everyone.
If there is interest for any of our other service/ parts/ etc.. we are open to considering price cuts on those as well.
2.2 OHV LN2 CAI
2200 OHV CAI
2.4 LD9 CAI
2.2 Ecotec CAI
We have thought about pricing, but since this isn't an Offical GP i'm not allowed or going to throw that up. If there is some good interest we get one started up for everyone!
huch much you want for the LD9 cold air. Can you make one with out the extra pipe going to the original intake manifold, because I have the HO intake manifold. Thank you
GMR has got nothing on this
^^^
Was thinking the same thing.
Also, same sized piping for the whole intake.
No transitions.
-M
Remember....syringes go in the RED waste basket.
yeah, if you could modify the 2.4l for us with ho manifolds, i would be interested
Mastin wrote:^^^
Was thinking the same thing.
Also, same sized piping for the whole intake.
No transitions.
-M
yeah i notice the diffenrent size piping but im guessing that he has it like that at the ends because of the couplings size. But it would be good to have it all the same size.
GMR has got nothing on this
Well,
I'll guessing the pipe that's going down there is 2.5"
Induction dynamics is the same way.
But you can fit a 2.75" pipe through the hole over there no problem.\
-M
Remember....syringes go in the RED waste basket.
id definately be interested in one!!
You already know I'm interested in the 2.2 OHV LN2 CAI lol
SO whats the prices??
GMR has got nothing on this
Ok here is what we would be offereing them for....
Engine........
SHORT RAM...........
CAI
2200 ------------$90 (reg.100)-------------$185 (reg. $205)
2.2 -------------$90 (reg. $100)-------------$185 (reg. $205)
2.2 eco----------$125 (reg.$145) -------------$215 (reg. $250)
2.4 --------------$125 (reg. $145)------------$215 (reg. $250)
USD + normal shipping.
We'd love to make an intake for the guys who have done the HO or LO mani swap, but unfortunately the only J's we have at the shop are Myself and Chris ( agentomega) and we both have the 2200 motor. So unless we can find someone to come into the shop and let us mock one up and take measurements and make it, we a ship out of water. If somone is willing to come in and let us do that, we'd be more than happy to offer you the same discount above and also help out your fellow J tuners or others car who have done the same application.
edit: the change in piping size for the CA Extension is 2.5" so that it can fit through the fender well wall and not have to cut anything away or worry about moving your coolant resovoir. The upper portion is all 3".. just to clear up any questions.
Edited 1 time(s). Last edited Monday, May 21, 2007 3:51 PM
2200 engines FOR THE WIN!!!!
hahahaha YEAH, THATS PROLLY THE ONLY TIME THAT'LL EVER BE SAID!!
Awesome deal... How about kits with K&N Filters? Are you still lookin for $230?
2 3/4" and 3" fits through the hole
look good other wise
Nity9CavSedanCRJ
i might be able to help i have a 2.4 and the manifold. i just need to put it on.
it's an lo but basicly the h.o is the same.
Possible to make an intake for the ECO S/C?
Just thought I ask
i mean i have a lo mani and a supercharged z i might be able to find one for yeah to work off of if you want.
Very interested shoot me a pm with shipping please to 53177 for a eco short ram
and do these come with a filter?
thanks =D
Lanman31337 -F = fatties = do not want. A little chunk in the junk is ok though.
Joe - Chris would be doing the polishing most likely, its $15.00 an hr and usually 2-3hrs to do it and i'm sure ryan can make some sort of adaptor flange between the manifold and the ecotec intake ports. I'm sure others on here would want one as well..
I've sent a few PM's to people, others i will send some later.. I've been at work since 4am this morning, i need to get out and enjoy the sun since working in a meat cooler is very lame.
what are we looking at for shipping to Canada, i'm near Toronto, ON. so i'm not all that far from you.
The part would be the 2.2 OHV non ecotec CAI, and do these come with filters?
could we possibly get a cai end connector price? and just buy the part that goes from the curve to the filter???
thanks
You take a women and X her by PSI devide the legs and you can then juice the car......LOL
All the intakes will come with a red or blue filter, your choice. Or we have K&N's you can pay a little more for one and subsititue that instead.
The K&N's are $25 more to the order and look like this but nice and clean....
Shipping to Ontario, CA is $40 even to cover border fee's etc.
Shipping anywhere in the U.S. is $35.
Alcoholjc- Of course, we can work something out on the side.
From the black coupler to the right side of the photo is the CAI extension.
Sunflowerpower- this is what yours would look like uninstalled.
We should have this up and running shortly.
how much would it be for the ecotec cai extension then, i'm very interested, i bought a wai for the ecotec
just wanted to see if you thought it would work,
thanks
You take a women and X her by PSI devide the legs and you can then juice the car......LOL
im interested in the ecotec short ram
