im wanting to do a compression test tonight on my 2200 2.2. what all steps do i need to perform to do so. if i can get a step by step ill do a write up with pics tonight to go along with the process.
maybe this should be moved to maintenance sorry
still no answers
well... surprised by this
pull the wires from the plugs and the coil and remove each plug....insert the testing unit and crank the motor and check reading....repeat for each cylinder.
got ya thanks. thats what i figured i was just lost witht eh how to disable coil pack thing.
basically take the spark wire from both sides, the plug and from the coil.
y not just take out the ecm fuse becouse you are going to want to stop fuel as well (the fuel will throw off your readings)
