Hi
i'm making a air ride setup,
i have almost everything exept fitting and gauge tubing
i saw on suicidedoors.com that they sell T fitting with a plug for 1/8 tubing to go to gauge..
i ever thought that we have to use 1/4 tubing...
so my question is: should i buy these fitting and use 1/8 tubing or i need to go with 1/4
all my setup is 1/2 (tubing,valve,and i have already some fitthing..)
here is the link
http://www.suicidedoors.com/12BrassTeewith1890DegFitting.php
thanks alot guys!

Yup, people usually a 1/4 line, but if you are going to use that fitting and an 1/8 line. Use these fittings on your gauges http://www.suicidedoors.com/14ODx18NPTFFemaleConnector.php

That is EXACTLY what I used on my set up. 1/8" is PERFECT for Guages.

4 1/2" would be so hard to get in your A pillar like mine or anywhere for that matter.

Mine work great.

its 1/8". the easystreet gauges are set up to run an 1/8" line to the back of the gauge. atleast it was when i had it.

easystreet gauges are 1/4". but 1/8" is so much easier to run

my kit came w/ 1/4" lines for the gauges.

PITA to move around!!

yellow22 wrote:easystreet gauges are 1/4". but 1/8" is so much easier to run

hmm your right. i checked the site and it was 1/4". i havent touched any of it in over a year, i dont know why i thought it was 1/8"